• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.3
• /
• pp.107-113
• /
• 1999

The purpose of this study is to analyze multi-size power chuck which can chuck work pieces having various sizes automatically and be used suitably to an exclusive product line in the field of automotive industry. Gripping force, accuracy, and stiffness about the chuck are especially considered for the analysis. MSC/NASTRAN software is used for FEM analysis. Also, the effects of centrifugal force which occurs when chuck body rotates and compressive stresses which occur at contacting area in between chuck body and collet are estimated.

• Journal of architectural history
• /
• v.25 no.4
• /
• pp.65-73
• /
• 2016

This paper aimed to identify the units of measuring scale in Hwangnyongsa temple planning with the published excavation survey reports. Hwangyongsa temple site was planned under Silla Capital's urban planning in 6~7C, its full size was $800{\times}800$, and main temple was $400{\times}515$ of Goguryeo's system of measurement. Main hall was located in the center of Hwangnyongsa temple site, and its location could be seen that there was the arrangement of main temple divided into 3 : 2. Building plan measuring units proved to be 351~356mm and 294~ 296mm by analyzing measured data of remains. Lecture hall and Wooden pagoda were rebuilt by using the ancestors' units of measuring scale again and Bell hall was not planned by Tang's system of measurement in middle of 8C. In this respect, it would be important to have a deliberate attitude and lay down stereotypes on research of the units of measuring scale in ancient architecture.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.275-277
• /
• 2018

선박 및 해상교통관제에 있어서 교통 혼잡구역에 대한 선박교통밀도 예측은 선박충돌사고 예방에 중요하다. 선박 교통밀도 예측정보는 사전에 진입하는 선박들에게 속력조정, 우회항로 이용 등 사전 조치가 가능하다. 본 연구에서는 해상 선박교통상황을 딥러닝 네트워크에 학습한 주의구역 선박교통류 예측 모델(Ship Traffic Extraction Network, STENet)을 제안하여 주의구역의 선박교통류 예측을 수행하고자 한다. STENet 모델 학습을 위해 여수해역 AIS 데이터를 전처리하고, 생성된 입력(해상교통상황)-출력(주의구역 교통밀도) 쌍 데이터를 적용하여 STENet 모델을 학습하였다. 학습된 모델을 이용하여 선박교통류 예측을 한 결과, 중기예측은 표준 절대 오차(mean absolute error)가 0.4-0.5척이 였으며, 장기예측은 0.7-0.8척의 오차로 기존의 Dead Reckoning에 의한 방법보다 50% 이상 교통밀도 예측성능이 향상 되었다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.8-15
• /
• 2005

The new square electro-magnetic chuck, which can be used for the clamping devices on a grinding machine, is developed in this study to improve the convenience of grinding works. The various kinds of structures are recommended to find the most adequate magnetic characteristics through the analytical approach using finite element methods. The analyzed results are retrofitted to solve the drawbacks of previous models step by step by considering the magnetic fields, strength and distribution of drag force, and thermal deformations of chuck such as high parallelism and flatness. Finally the best recommended models is designed to satisfy the KS specifications required fur the commercial magnetic chuck. The prototype chuck with this dimensions and structures is manufactured. For this final model, the experimental verifications are investigated whether the KS specifications are satisfied.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.620-623
• /
• 2000

본 논문은 절연재료의 보이드(void)나 크랙(crack)과 같은 결함이 부분방전을 일으킴으로서 절연재료가 열화되어 최종적으로 파괴에 이른다. 특히 부분방전 중에서 트리잉 열화는 절연재료에 매우 치명적이다. 또한 고전압,고전계 기술분야에서 절연파괴전압이나 일정전압 인가시 수명 시간 데이터는 중요하다. 파괴 통계에 주로 많이 사용하는 와이블 확률 분포를 이용하여 트리잉 파괴에 대한 수명을 평가를 시도하였다. 시료의 형태는 침대 평판전극이고 시료는 저밀도 폴리에틸렌이다 인가 전압은 상용 교류 전압 8,10,12[kV]를 인가하였다. 척도 파라메타는 전압이 증가함에 따라 128.7$\longrightarrow$96.4$\longrightarrow$85.4로 감소하고 형상 파라메타는 전압이 증가함에 따라 2.39$\longrightarrow$2.19$\longrightarrow$2.02로 감소한다. 따라서 시료의 추정 수명은 110분, 81.57분, 49.27분으로 전압이 증가함에 따라 수명이 급격히 단축됨을 알 수 있다.

• Membrane Journal
• /
• v.17 no.2
• /
• pp.124-133
• /
• 2007

In this study, we treated lake water by 2 kinds of multichannel ceramic micro filtration membranes. We could investigate effects of $N_2-back-flushing$ time (BT) and transmembrane pressure (TMP), and find optimal operating conditions. The BT were changed in $10{\sim}60$ sec, TMP in $0.6{\sim}2.0$ bar at fixed filtration time (FT) 8 min, flow rate 2.0 L/min and back-flushing pressure 2.0 bar. Also, the optimal conditions were discussed in the viewpoints of resistance of membrane fouling $(R_f)$, dimensionless permeate flux $(J/J_o)$, permeate flux (J) and total permeate volume $(V_T)$. As result, optimal back-flushing conditions for HC04 ($0.4{\mu}m$ pore size) and HC10 membrane $(1.0{\mu}m)$ were BT=10 sec and BT=20 sec, respectively. Then, higher TMP should increase the driving force, and could produce more VT. Average rejection rates of pollutants were higher than 95.4% for turbidity, $12.7{\sim}20.1%\;for\;COD_{Mn},\;0.0{\sim}6.4%\;for\;NH_3-N,\;1.9{\sim}4.6%$ for T-N and $34.9{\sim}88.4%$ for T-P.

• Membrane Journal
• /
• v.19 no.1
• /
• pp.7-18
• /
• 2009

In this study, we used the hybrid module that was composed of granular activated carbons (GAC) packing between module inside and outside of tubular ceramic microfiltration membrane for advanced drinking water treatment. Instead of natural organic matters (NOM) and fine inorganic particles in natural water source, modified solution was prepared with humic acid and kaolin. We were investigated effect of water-back-flushing time (BT) and water-back-flushing period (FT) to minimize membrane fouling and to enhance permeate flux (J) in the hybrid process, and tried to find the optimal operating conditions. As a result, resistance of membrane fouling ($R_f$) was slightly decreased according to increasing BT. Also, the shorter FT was the more effective to reduce $R_f$ and to enhance J because of frequent water-back-flushing. However, the optimal BT and FT conditions were 10 sec and 8 min respectively when operating costs were considered. Then, the optimal conditions derived from our experiments of modified solution were applied to lake water treatment. As a result, average treatment efficiencies of turbidity, $UV_{254}$ absorbance, and $COD_{Mn}$ were very high as 99.11%, 91.40% and 89.34%, respectively, but that of TDS was low as 30.05%.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.209-215
• /
• 2015

Miraculous victory of Myeongnyang sea battle turned the tide of the Joseon's entire war against Japan and it is regarded as one of the most remarkable sea victories in the world history. In the sea battle of Myeongnyang, on September 16, 1597(lunar calender), the Joseon navy with 13 battle ships, led by Admiral Yi Sun-sin, won the Japanese navy with their fleet of 133 warships. There were several reasons why Admiral Yi decided on this location for battle. Myeongnyang strait is so narrow and had currents so powerful that many ships could not pass strait simultaneously. Therefore, despite being vastly outnumbered, Admiral Yi used terrain and tidal current advantage to defeat Japanese navy's numerical advantage. In order to find out the tidal state of Myeongnyang strait on September 16, 1597, topological phase of sun and moon was studied by orbital period of earth and moon. The tidal state of Myeongnyang strait on September 16, 1597 is estimated based on the theories of tide and tide tables. As a result of this study, time of slack water were found to be 0636, 1248, 1906 and time/speed of maximum tidal current were found to be 0930/8.3kts(NW), 1612/9.9kts(SE).

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.1
• /
• pp.45-53
• /
• 2008

In this paper, the property of influent water and variations of removal efficiencies in each unit processes were studied based on the experiment data from the advanced water treatment plant in a city of Korea. The microbial species in the biological activated carbon(BAC) after backwashing of activated carbon filtration tank(ACFT) were also identified. The property and the removal efficiencies were evaluated by considering 8-9 items. The variations of 4 items were investigated from the influent and effluent of ACFT. SEM recording were conducted on BAC samples before and after backwashing. And the existence of attached microorganisms were identified through HPC(Heterotrophic Plate Counter) investigation. For the property of influent water, the concentrations of most items were maintained in the constant ranges, some items had seasonal properties. For the removal efficiencies, there were some items showing similar monthly-pattern and increasing with time, other items decreasing at the ozone contactor. Through these investigations, it was possible to distinguish the target items, which were removed by the advanced processes. The existence of microorganisms in ACFT could be predicted based on the variation curve of NH$_3$-N, and this fact were proved by SEM and HPC.

• Membrane Journal
• /
• v.23 no.3
• /
• pp.226-236
• /
• 2013

The effect of $N_2$ back-flushing period (FT) and time (BT) was compared with the previous result used PES (polyethersulfone) beads loaded with titanium dioxide photocatalyst in hybrid process of alumina microfiltration and PP (polypropylene) beads coated with photocatalyst in viewpoints of membrane fouling resistance ($R_f$), permeate flux (J), and total permeate volume ($V_T$). The reason of nitrogen back-washing instead of the general air back-washing method is to minimize the possible effect of oxygen included in air on water quality analysis. As decreasing FT, $R_f$ decreased and J and $V_T$ increased. Treatment efficiency of dissolved organic matters (DOM) was 82.0%, which was the higher than 78.0% of the PES beads result. This means that PP beads coated with photocatalyst was the more effective than PES beads loaded with photo-catalyst in the DOM removal. As increasing BT, the final $R_f$ decreased and the final J increased, but $V_T$ was the maximum at BT 15 sec. The average treatment efficiency of turbidity did not have any trend as changing BT. As BT increasing from 6 sec to 30 sec, the treatment efficiency of DOM increased 11.8%, which was a little higher than the result of PES beads.