• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel. undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesio-distally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference on fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even of that portion consists of mainly enamel and a little dentin structure.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel, undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesiodistally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference in fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even if that portion consists of mainly enamel and a little dentin structure.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.28-37
• /
• 2017

Mineral trioxide aggregate have been used for many years as a pulp therapy material. The most widely used product, Proroot white $MTA^{(R)}$ has a major drawback that it causes tooth discoloration. This study assessed discoloration of crown when various MTA-based materials were placed in the coronal aspect of the root canal. Seventy-five single-rooted, unrestored premolar teeth were selected. The teeth were randomly assigned to four experimental groups, each of $Biodentine^{(R)}$, Proroot $wMTA^{(R)}$, $Endocem^{(R)}$, $RetroMTA^{(R)}$ and one negative control groups. Color measurements were utilized by the Commission International de I'Eclairage's L*a*b* system with spectrophotometer. The color was assessed eight times : initial, 1 day, 1 week, 2 weeks, 4 weeks, 8 weeks, 12 weeks, and 16 weeks after the placement. Statistical analysis was performed using the 2-way repeated analysis of variance and Bonferroni's method with p < 0.05. Proroot $wMTA^{(R)}$ induced significant decreases in $L^*$ values during experiment period. Tooth samples from the $Endocem^{(R)}$ group presented indistinct grayish color changes. The $Biodentine^{(R)}$ and $RetroMTA^{(R)}$ showed color stability. Consequently, while Proroot $wMTA^{(R)}$ and $Endocem^{(R)}$ that contain bismuth oxide as a radiopacifier showed tooth discoloration, displayed no sign of discoloration $Biodentine^{(R)}$ and $RetroMTA^{(R)}$ that contain zirconium oxide as a radiopacifier.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.119-126
• /
• 2010

We need to develop a target market for elderly women by increasing the ratio of functional apparel. The purpose of this study was to provide basic data for developing a Leisure Sports Jumper and improving the quality of life of clothing for female elderly consumers. This study reviewed the current situation on the production of the functional Leisure Sports Jumper for the elderly women in literature. For the experimental study, we selected Leisure Sports Jumpers from five apparel brands, and evaluated a sensory test on 20 subjects representing the average body shape of the elderly women aged from 65 to 75. After the first sensory test, we manipulated the patterns for samples of the Leisure Sports Jumper. In the second sensory test, visual and cognitive appropriateness of the Leisure sports jumpers were assessed by the elderly women. The results of the study were as follows: the Leisure Sports Jumper of brand 'C' showed the highest appropriateness in terms of neck, armholes, and sleeves among the 5 brands. The Leisure Sports Jumper of brands 'B' and 'D' showed the lowest appropriateness in the width of the armpits among the 5 brands. Except for the length of the Leisure Sports Jumper, the margin, location of the pocket, and armholes had the lowest score in the first test showing over 3.5 points.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.3 s.17
• /
• pp.75-82
• /
• 2005

The conceptual structural design consists of selecting structural material and form of the building, producing a preliminary dimensional layout. The information such as height of the building use, typical live load, wind velocity, design acceleration, maximum lateral deflection, span, story height is a important factor in conceptual design phase. In this case, the knowledge solutions for past similar problems cam be used in the process of defining and finding a solution to the design problems. In this paper, the conceptual structural design method using case-based reasoning which is intended to assist engineers in the conceptual phase of the structural design of tall buildings is introduced. Inductive retrieval method and nearest-neighbor retrieval method are used for selecting structural system and similar design case, respectively.

• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.851-858
• /
• 2004

Purpose of this paper is to determine the appropriate size of a center notched disk specimen for mode I fracture toughness $K_{IC}$. For this purpose, mode I test results with various sizes of center notched disk were compared with the RILEM three-point-bend test ones. Compressive strength of concrete used in this paper was 44.9 MPa. Diameters of 200, 300, 400 mm, thickness of 75, 100, 125 mm, and notch length ratios an of 0.3, 0.4, 0.5, 0.6 were used for the mode I disk test. Also, diameter of 300mm thickness of 100mm, and notch length ratios a/R of 0.3, 0.4, 0.5, 0.6 were used for the mixed mode disk test. Mixed mode stress intensity factors were investigated by changing notch angles for the disk specimen. Stress intensity factors of a center notched disk were calculated with the various methods for comparison. From the test results, mode I fracture toughness calculated from the disk specimen with diameter of 300 mm, thickness of Inn and notch length ratio a/R of 0.5 was very similar to the RILEM three-point-bend test ones. And it is verified that stress intensity factors for mixed mode can be easily calculated with the disk specimen.

• Parasites, Hosts and Diseases
• /
• v.35 no.4
• /
• pp.233-238
• /
• 1997

A small coastal village of Muan-gun, Chollanam-do, was surveyed for intesti- nal fluke infections, especially heterophyids such as Heterophwes nocens and Ftsiniopsis summc by fecal examination on 108 inhabitants. The egg Positive rate of heterophyids was very high. 75.0%, and that of other parasites was comparatively low.0.9-3.7% by parasite species . After treatment of 20 patients showing high E. P. G. with praziquantel and purging with Mgs04, total 3,864 specimens of H. nocens were collected from the diarrheic stools of all the patients treated (3-1,338 individuallyl and total 703 p. summc were harvested from 18 patients (1-170 individually), together loth several other species of flukes. Other flukes included Stictodora jlscotn (164 specimens from 4 patients), Heterophwopsis continuo (2 from 2 patients), and Gwmnophalloides seoi (4 from 3 patients). From this study, the sutra- veyed coastal area of Muan-gun, Chollanam-do was proven to be a new endemic focus of H. nocens and p. summa. The occurrence of a few infected cases surf:mists that this area should also be a low-grade endemic area of S. Juscctc, H. continuo, and G. seoi.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.31-42
• /
• 1995

This study was designed to evaluate the expression of growth factor in periodontal tissue during the experimental movement of rat incisors by LSAB(Labelled streptavidine Biotin) immunohistochemical staining for EGF(Epidermal growth factor). 23 Sprague-Dawley rats were divided into a control group(3rats) and experimental groups(20rats), where a force(75g) from helical springs across the maxillary incisors was applied. Experimental groups were sacrificed at 12 hours, 1, 4, 7 and 14 days, after force application, respectively. And Tissue slides of control and experimental groups were studied immunohistochemically and histologically. The results were as follows : 1. In 14days after force application, periodontal fibers were strectched on the tension side, and compressed In pressure side of all experimental groups, and the arrangement of periodontal fibers was not recovered yet. 2. The degree of EGF expression in control group was strongly positive in the oral epithelium, predentin, capillaries in pulp and periodontal spaces. But osteoblasts and osteoclasts were stained mildly positive. 3. EGF expression was mild and diffuse in 12 hours, 1, 4 and 7 days of experimental groups and was not significantly different between the tension and pressure sides. 4. The degree of EGF expression in the 14-day experimental group was higher than any other group. And the tension side showed a more positive EGF expression than the pressure side. The apical area revealed a more positive EGF expression than the cervical area.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.3
• /
• pp.49-61
• /
• 2022

This study aims to provide upper body shape information by analyzing the measurement data of middle-aged women aged 50-69, including baby boomers, whose economic power and activity have improved compared to the previous generations. In order to provide accurate upper body shape information by analyzing the body type using the 8th Size Korea measurement data, body shapes were classified through factor and cluster analysis using 75 direct measurement items. Upper body type was classified according to the factors, and the associated characteristics were analyzed. As a result of the comparative analysis of the upper body measurements from the 4th to the 8th Size Korea measurement, it was found that in the height item, both the waist height and the hip height increased, making the overall height greater and the leg length longer. The body circumference items tended to increase, but were found to decrease significantly in the 8th Size Korea (2021) measurement. Middle-aged women were classified using five factors. Factor 1 was the upper body obesity factor, and Factor 2 was the trunk vertical factor. Factor 3 was the width of the back shoulder, Factor 4 was the vertical factor behind the back, and Factor 5 was the length factor of the front garment composition. Middle-aged women were classified into four body types through cluster analysis. Type 1 is relatively small and skinny, Type 2 has the most obese upper body and developed back shoulders, and Type 3 is skinny and has a long back and short front. In Type 4, the upper body was relatively long and the shoulders were narrow.

• Journal of dental hygiene science
• /
• v.5 no.1
• /
• pp.13-17
• /
• 2005

This research was conducted in order to collect and arrange an oral health information needed the school oral hygiene as a part of a long term local community oral hygiene development to promote the oral health of the residents in Sung-Nam. After gathering the information of oral hygiene of 12-year old schoolchildren in Sung-Nam, these conclusions are reached: (1) The experience of dental caries in permanent teeth of 12-year old schoolchildren in Sung-Nam was revealed 74.7%, proportion of children with one or more caries in permanent teeth was 36.2%, and DMFT index was 2.75. (2) DT rate was 28.4% in total and regional difference has been revealed. In Sujung-Gu, DT rate was 36,8% and this was nearly as twice as 19.8% in Bundang-Gu. (3) For permanent teeth, fillings requirements for one surface were 26.6%, more that two surfaces were 13.3%. In addition, artificial crown treatment requirements were 1.8%, dental pulp treatment was 5.3%, and extraction requirement was 2.2%. In contrast, holders of pit and fissure sealant were only 27.1%. (4) In Sung-Nam, oral hygiene education campaign for 12-year old schoolchildren needs to be continued. Simultaneously, early stage examination and preventive approaches for decayed teeth such as pit and fissure sealant need to be considered for schoolchildren who have high tendency of dental caries and who are in areas which show high percentage of dental caries occurrence.