• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.5-6
• /
• 2008

• 한국정밀공학회지
• /
• 제33권7호
• /
• pp.579-586
• /
• 2016

This paper describes kinematic analysis of a 6-degrees-of-freedom (DOF) ultra-precision positioning stage based on a flexure hinge. The stage is designed for processes which require ultra-precision and high load capacities, e.g. wafer-level precision bonding/assembly. During the initial design process, inverse and forward kinematic analyses were performed to actuate the precision positioning stage and to calculate workspace. A two-step procedure was used for inverse kinematic analysis. The first step involved calculating the amount of actuation of the horizontal actuation units. The second step involved calculating the amount of actuation of the vertical actuation unit, given the the results of the first step, by including a lever hinge mechanism adopted for motion amplification. Forward kinematic analysis was performed by defining six distance relationships between hinge positions for in-plane and out-of-plane motion. Finally, the result of a circular path actuation test with respect to the x-y, y-z, and x-z planes is presented.

• 제어로봇시스템학회논문지
• /
• 제8권7호
• /
• pp.599-606
• /
• 2002

A new method to govern the navigation of a mobile robot using hand gesture recognition is proposed based on the following two procedures. One is to achieve vision information by using a 2-DOF camera as a communicating medium between a man and a mobile robot and the other is to analyze and to control the mobile robot according to the recognized hand gesture commands. In the previous researches, mobile robots are passively to move through landmarks, beacons, etc. In this paper, to incorporate various changes of situation, a new control system that manages the dynamical navigation of mobile robot is proposed. Moreover, without any generally used expensive equipments or complex algorithms for hand gesture recognition, a reliable hand gesture recognition system is efficiently implemented to convey the human commands to the mobile robot with a few constraints.

• 제어로봇시스템학회논문지
• /
• 제11권7호
• /
• pp.602-608
• /
• 2005

In the virtual environment, force feedback to the human operator makes virtual experiences more realistic. To ensure the safe operation and enhance the haptic feeling, stability should be guaranteed. Both motors and brakes are commonly used for haptic devices. Motors can generate a torque in any direction, but they can make the system active during operation, thus leading to instability. Brakes can generate a torque only against their rotation, but they dissipate energy during operation, which makes the system intrinsically stable. Consequently, motors and brakes are complementing each other. In this research, a two degree-of-freedom (DOF) haptic device equipped with motors and brakes has been developed to provide better haptic effects. Each DOF is actuated by a pair of motor and brake. Modeling of the environment and the control method are needed to utilize both actuators. Among various haptic effects, contact with the virtual wall, representation of friction and representation of plastic deformation have been investigated extensively in this paper. It is shown that the hybrid haptic device is more suited to some applications than the motor-based haptic device.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.325-327
• /
• 2007

3차원 형상의 물체에 대한 표면 면적을 6축 센서를 사용하여 측정하였다. 3차원 형상의 표면적은 여러 개의 작은 삼각형으로 나타낼 수 있다. 이 여러 개의 삼각형의 합을 구함으로써 표면 면적을 구할 수 있고, 삼각형의 크기가 작으면 작을수록 실제 면적의 크기에 접근 하였다. 실험 결과 평균 7.78%의 오차율을 보였다.

• 한국산업보건학회지
• /
• 제15권1호
• /
• pp.1-7
• /
• 2005

Although the Fourier Transform Infra-Red spectrophotometric Direct on Filter(FTIR-DOF) method is a useful analytical technique for quantifying quartz content in respirable dust samples, a number of analytical problems must be taken into consideration such as, to name only a few, inhomogeneous deposition of particles, level of environmental humidity, uneven surface of the filter, and interfering minerals in the sample. This study was designed to select the most suitable wavelength and proper filter material for the method, and to investigate effects of humidity and inhomogeneous deposition of particles on the filter. Samples of respirable dust, created in a dust chamber containing standard material of quartz, were collected using a cyclone equipped with a 25mm filter as a collection medium. The results were as follows; 1. Among seven (7) commercially available filters tested for the FTIR-DOF method, the DM 800 filter showed the best analytical performance having the lowest background absorbance bands and no overlapping peaks at 799, 779, and $695cm^{-1}$. 2. The variations of absorbance due to humidity ranged from 1.0% to 3.3% for $799cm^{-1}$, 1.0% to 3.3% for $779cm^{-1}$, and 8.9%~20.9% for $695cm^{-1}$ peaks, respectively. The $699cm^{-1}$ peak was proved to be most vulnerble to environmental humidity for quantitative analysis of quartz. 3. As for effects of inhomogeneous deposition of samples, the highest variation of absorbance of 10.9% ($13.5{\mu}g$) was observed when using the 695cm-1. The variations of absorbance from the other two peaks, 799 and $779cm^{-1}$, ranged from 1.2 to 3.2%, and 1.4 to 4.1%, respectively. Therefore, the $799cm^{-1}$ peak was considered to be most reliable for quantitative analysis of quartz. The results of this study suggest that, for quantitative analysis of quartz in the respirable dust samples, use of the $799cm^{-1}$ peak can minimize the influence of environmental humidity and inhomogeneous deposition of particles on the filter. The FTIR-DOF method, if adopted for routine analysis of quartz in the respirable dust samples, could save sample preparation time and efforts substantially and also could increase analytical throughputs. Since use of the $799cm^{-1}$ peak is prone to be affected by interferences in the sample, further research on minimizing the effects is needed.

• 한국방재학회 논문집
• /
• 제5권3호
• /
• pp.11-21
• /
• 2005

곡선교량의 복잡한 동적거동을 이해하고, 내진해석시 합리적인 해석방법을 선정할 수 있는 기초적인 연구를 수행하기 위하여 ??자유도를 포함한 절점당 7자유도를 갖는 곡선보요소와 직선보요소를 갖는 동적유한 요소해석 프로그램을 사용하여 곡선교량의 내진해석을 수행하였다. 자유진동해석 결과로부터 곡선교량의 모드특성을 직선교량과 비교하여 분석하였다. 또한, 동일지간장을 갖는 직선교와 곡선교의 지진시 거동특성을 분석하고, AASHTO의 정규교량으로 분류된 곡선교량의 내진해석방법에 대해 비교하였다. 또한, 지진하중작용방향과 곡선교량의 내부중심각을 변화시켜 곡선교량의 동적거동을 파악하였다.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.134-141
• /
• 2009

Recently, many researchers have tried to develop wearable robots for various fields such as medical and military purposes. We have been studying robotic exoskeletons to assist the motion of persons who have problems with their muscle function in daily activities and rehabilitation. The upper-limb motions (shoulder, elbow and wrist motion) are especially important for such persons to perform daily activities. Generally for shoulder motion 300F is needed to describe its motion(extension/flexion, abduction/adduction, internal/external rotation) but we have used a redundant actuator thus making a 4 DOF system. In this paper, we proposed the mechanism design of the exoskeleton which consists of 4-DOF for shoulder and 1-DOF for elbow robotic exoskeleton to assist upper-limb motion. Then we compared the new mechanism design and prototype mechanism design. Here we also analyze the proposed system kinematically to find out and to avoid the singular point. This research will ensure that the proposed wearable robot system make human's motion more powerfully and more easily.

• 한국전자통신학회논문지
• /
• 제6권1호
• /
• pp.142-147
• /
• 2011

본 연구에서는 로봇 미들웨어 기술 중 국제표준으로 채택된 RTM을 이용하여 7자유도 매니퓰레이터 협업로봇의 구성 요소를 RT 컴포넌트로 만들었다. 또한 미들웨어 네트워크를 기반으로 로봇 구성 요소의 RT 컴포넌트를 서로 연결하여 하나의 로봇 시스템을 구현하였으며, 실제 제작된 7자유도 매니퓰레이터를 이용하여 구현 시스템의 동작을 테스트하였다.

• 사물인터넷융복합논문지
• /
• 제4권2호
• /
• pp.7-11
• /
• 2018

본 논문에서는 기구학을 이용한 이족보행 로봇의 보행패턴 생성방법을 살펴본다. 2족 보행로봇이 3차원 공간상에서 모든 동작 및 보행이 가능하기 위해 필요한 자유도는 각 다리별로 6자유도이다. 따라서 본 논문에서는 로봇의 보행을 위해 간략화된 보행로봇의 구조를 살펴보고 발목의 경로를 설정한 후 기구학을 이용하여 조인트 각도를 파악하여 생성한다. 또한 로봇의 기구 해석을 위해 한쪽 다리의 조인트들에 대해 좌표계를 설정하였다. 조인트 각도를 역기구학을 이용하면 로봇의 보행 패턴을 생성할 수 있다. 최종적으로 발목의 궤적 설정과 이를 통한 보행 패턴 생성 과정을 살펴보기로 한다.