• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.257-262
• /
• 2010

The study investigates the various Acceptance Control Charts (ACCs) based on the factors that include process independence, data weighting scheme, subgrouping, and use of control charts. USL - LSL > $6{\sigma}$ that used in the good condition processes in the ACCs are designed by considering user's perspective, producer's perspective and both perspectives. ACCs developed from the research is efficiently applied by using the simple control limit unified with APL (Acceptable Process Level), RLP (Rejectable Process Level), Type I Error $\alpha$, and Type II Error $\beta$. Sampling interval of subgroup examines i.i.d. (Identically and Independent Distributed) or auto-correlated processes. Three types of weight schemes according to the reliability of data include Shewhart, Moving Average(MA) and Exponentially Weighted Moving Average (EWMA) which are considered when designing ACCs. Two types of control charts by the purpose of improvement are also presented. Overall, $\alpha$, $\beta$ and APL for nonconforming proportion and RPL of claim proportion can be designed by practioners who emphasize productivity and claim defense cost.

• 천문학논총
• /
• 제30권2호
• /
• pp.593-594
• /
• 2015

We present our analysis results for an updated orbital ephemeris for the dipping low mass X-ray binary 4U 1624-49, using the light curve collected by the All Sky Monitor (ASM) on board the Rossi X-ray Timing Explorer (RXTE) and the Monitor of All-Sky X-ray Image (MAXI). To make clear dip profiles, the light curve from the ASM and the MAXI were divided into ten 500d segments and four 400d segments for ASM and MAXI light curves, respectively, and folded with the linear ephemeris proposed by Smale et al. (2001). The phases of dip centers were determined by the method adopted from Hu et al. (2008). The phase drift was then fitted with a linear function. We obtained an updated orbital period of 0.869896(1) d and a phase zero epoch of JD 2450088.6618(57). No clear orbital period derivative is detected with a 2-sigma upper limit of $1.4{\times}10^{-6}(yr)^{-1}$ from a quadratic curve fitting of the dip phase evolution.

• 천문학회보
• /
• 제37권2호
• /
• pp.83.2-83.2
• /
• 2012

Type I AGNs are classified by the presence of broad emission lines while Type II AGNs show narrow emission lines only. All-sky surveys such as SDSS provide large AGN samples for statistical studies. However, the AGN samples suffer selection bias due to the incomplete selection criteria. To investigate the missing Type I AGNs in optical spectroscopic surveys, we start with a sample of SDSS Type II AGNs at 0.02 < z < 0.05, using the MPA-JHU SDSS DR7 catalog. We search for the hidden broad $H{\alpha}$ component with both visual inspection and the multi-component spectral decomposition method. Out of 1383 Type II AGNs, we find a total of 62 missing Type I AGNs (~4.5%). The sample has mean black hole mass, log $(M_{BH}/M_{SUN))=6.48{\pm}0.53$, and luminosity, log $(L_{H{\alpha}}/ergs^{-1})=40.52{\pm}0.33$, with Eddington ratio, log $(L_{bol}/L_{Edd})=-1.51{\pm}0.41$. We will describe the sample and present the $M_{BH}-{\sigma}_*$, and $M_{BH}-M_*$ relations of the sample in the context of the BH-galaxy coevolution.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.200-210
• /
• 2016

The neutron radiography reactor (NRAD) is a 250 kW Mark-II Training, Research, Isotopes, General Atomics (TRIGA) reactor at Idaho National Laboratory, Idaho Falls, ID, USA. The East Radiography Station (ERS) is one of two neutron beams at the NRAD used for neutron radiography, which sits beneath a large hot cell and is primarily used for neutron radiography of highly radioactive objects. Additional fuel elements were added to the NRAD core in 2013 to increase the excess reactivity of the reactor, and may have changed some characteristics of the neutron beamline. This report discusses characterization of the neutron beamline following the addition of fuel to the NRAD. This work includes determination of the facility category according to the American Society for Testing and Materials (ASTM) standards, and also uses an array of gold foils to determine the neutron beam flux and evaluate the neutron beam profile. The NRAD ERS neutron beam is a Category I neutron radiography facility, the highest possible quality level according to the ASTM. Gold foil activation experiments show that the average neutron flux with length-to-diameter ratio (L/D) = 125 is $5.96{\times}10^6n/cm^2/s$ with a $2{\sigma}$ standard error of $2.90{\times}10^5n/cm^2/s$. The neutron beam profile can be considered flat for qualitative neutron radiographic evaluation purposes. However, the neutron beam profile should be taken into account for quantitative evaluation.

• 정보보호학회논문지
• /
• 제30권5호
• /
• pp.823-834
• /
• 2020

과거 카드3사 개인정보유출 사건을 계기로 전산 프로그램 개발 시에도 운영환경과 동일 수준의 엄격한 전자금융감독규정을 준수하고 있다. 하지만, 전산 프로그램 개발시 해당 응용 프로그램과 연관된 테스트 데이터 변환 대상범위 식별이 불명확하여 테스트 데이터의 무결성이 훼손된 상태로 응용 프로그램을 검증하고 있어, 이 단계에서 발견되지 못한 결함이 서비스 장애로 이어지는 IT운영리스크가 증가되고 있다. 따라서, 본 논문에서는 특정 응용 프로그램과 연관된 테스트 데이터 변환대상 범위 선정을 위한 프로세스와 알고리즘을 제시하여 실증하였다.

• Journal of Pharmaceutical Investigation
• /
• 제27권2호
• /
• pp.99-108
• /
• 1997

To evaluate the feasibility of mucosal delivery of thyrotropin releasing hormone (TRH) through various mucosae, enzymatic degradation and stabilization of TRH in the nasal, rectal and duodenal extracts of rabbits were studied. TRH in the extracts was assayed by HPLC and its degradation was found to follow apparent first-order kinetics. The residual concentrations of TRH in the mucosal extracts of nasal, rectal and duodenal segments after 24 hr of incubation were found to be $65.1({\pm}1.1),\;19.7({\pm}2.7)$ and 0%, and in the serosal extracts, $65.6({\pm}5.5),\;75.2({\pm}1.1)$ and $68.7({\pm}1.4)%$, respectively. This result suggests that there is a significant difference in the activity of TRH-degrading enzymes among the sites of administration. The inhibition of TRH degradation in the mucosa extracts was kinetically investigated using various additives such as thimerosal, benzalkonium chloride, disodium edetate, ${\sigma}-phenanthroline$, dithiothreitol and dithioerythritol, and $IC_{50}$ values of inhibitors were calculated. The results obtained showed that thimerosal (0.5 mM) and benzalkonium chloride (0.141 mM) protected TRH from the enzymatic degradation in all the mucosa extracts more than 95% after 24 hr of incubation.

• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1287-1300
• /
• 2017

Based on the observation that ignoring the angle dependency of multigroup resonance cross sections within a fuel pellet would result in nontrivial underestimation of the spatial self-shielding of flux, a parametrized spectral superhomogenization (SPH) factor library (PSSL) method is developed as a practical means of resolving the problem. Region-wise spectral SPH factors are calculated by the normal and transport corrected SPH iterations after ultrafine group slowing down calculations over various light water reactor pin-cell configurations. The parametrization is done with fuel temperature, U-238 number density, fuel radius, moderator source represented by ${\Sigma}_{mod}V_{mod}$, and the number density ratio of resonance nuclides to that of U-238 in a form of resonance interference correction factors. The parametrization is successful in that the root mean square errors of the interpolated SPH factors over the fuel regions of various pin-cells are within 0.1%. The improvement in reactivity error of the PSSL method is shown to be superior to that by the original SPH method in that the reactivity bias of -200 pcm to -300 pcm vanishes almost completely. It is demonstrated that the environment effect takes only about 4% in the reactivity improvement so that the pin-cell based PSSL method is effective in the assembly problems.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2002년도 학술발표회 논문집(II)
• /
• pp.1187-1194
• /
• 2002

In this study, we have simulated regional climate over East Asia using dynamical downscaling For dynamic downscaling experiments for regional climate simulation, MM5method. with 27 km horizontal resolution and 18 layers of sigma-coordinate in vertical is nested within global-scale NCEP reanalysis data with 2.5。${\times}$2.5。 resolution in longitude and latitude. In regional simulation, January and July, 1979 monthly mean features have been obtained by both continuous integration and daily restart integration driven by updating the lateral boundary forcing at 6-hr intervals from the NCEP reanalysis data using a nudging scheme with the updating design of initial and boundary conditions in both continuous and restart integrations. In result, we may successfully generated regional detail features which might be forced by topography, lake, coastlines and land use distribution from a regional climate. There is no significant difference in monthly mean features either integrate continuously or integrate with daily restart. For climatologically long integration, the initial condition may not be significantly important. Accordingly, MM5 can be integrated for a long period without restart frequently, if a proper lateral boundary forcing is given.

• Journal of Mechanical Science and Technology
• /
• 제20권6호
• /
• pp.819-827
• /
• 2006

The stress-strain relation of aluminum (Al) alloy foam cell wall was evaluated by the instrumented sharp indentation method. The indentation in a few micron ranges was performed on the cell wall of Al-alloy foam having a composition or Al-3wt.%Si-2wt.%Cu-2wt.%Mg as well as its precursor (material prior to foaming). To extract the stress-stram relation in terms of yield stress ${\sigma}_y$, strain hardening exponent n and elastic modulus E, the closed-form dimensionless relationships between load-indentation depth curve and elasto-plastic property were used. The tensile properties of precursor material of Al-alloy foam were also measured independently by uni-axial tensile test. In order to verify the validity of the extracted stress-strain relation, it was compared with the results of tensile test and finite element (FE) analysis. A modified cubic-spherical lattice model was proposed to analyze the compressive behavior of the Al-alloy foam. The material parameters extracted by the instrumented nanoindentation method allowed the model to predict the compressive behavior of the Al-alloy foam accurately.

• Food Science and Biotechnology
• /
• 제15권4호
• /
• pp.589-594
• /
• 2006

The effect of five commercial gums (carboxylmethylcellulose, CMC; guar gum, GG; hydroxypropylmethyl-cellulose, HPMC; locust bean gum, LBG; and xanthan gum) at a concentration of 0.25% on the rheological properties of rice flour (RF) dispersions was investigated in steady and dynamic shear. The steady shear rheological properties showed that RF gum mixture dispersions (5%, w/w) at $25^{\circ}C$ had high shear-thinning flow behavior (n=0.20-0.31) exhibiting a yield stress. Magnitudes of consistency index (K), apparent viscosity (${\eta}_{a,100}$), and Casson yield stress (${\sigma}_{oc}$) of RF-gum mixtures were much higher than those of RF dispersion with no added gum (control). Activation energy values (6.67-10.8 kJ/mole) of RF-gum mixtures within the temperature range of $25-70^{\circ}C$ were lower than that (11.9 kJ/mole) of the control. Dynamic rheological data of log (G', G") versus log frequency (${\omega}$) of RF-gum mixtures had positive slopes (0.15-0.37) with G' greater than G" over most of the frequency range (0.63-63 rad/sec), demonstrating a frequency dependency. Tan ${\delta}$ (G"/G') values of RF-gum mixtures, except for xanthan gum, were much higher than that of the control.