• 제목/요약/키워드: 6sigma

검색결과 1,210건 처리시간 0.029초

제초성 3-Phenyl-5-(3,7-dichloro-8-quinolinyl)-1,2,4-oxadiazole 유도체들의 정량적인 구조와 생장 저해 활성과의 관계 (Quantitative structure-activity relationships for the growth inhibition activity of the herbicidal 3-phenyl-5-(3,7-dichloro-8-quinolinyl)-1,2,4-oxadiazole derivatives)

  • 성낙도;이상호;김형래;송종환
    • 농약과학회지
    • /
    • 제6권4호
    • /
    • pp.279-286
    • /
    • 2002
  • Quinclorac계의 새로운 제초성 화합물을 탐색하기 위하여 기질 화합물로 3-phenyl-5-(3,7-dichloro-8-quinolinyl)-1,2,4-oxadiazole 유도체들을 합성하고 정량적인 구조와 벼(Or-yza sativa L.) 및 논피(Echinochloa crus-galli)에 대한 생장 저해활성($pI_{50}$)과의 관계(QSAR)를 분석하였다. 그 결과, 기질물질은 평면성 화합물로서 벼보다는 논피에 대하여 비교적 높은(논피>벼) 생장 저해활성을 나타내었으며 벼는 전자적 성질(줄기: ${\sigma}_{opt.}=0.49$ 및 뿌리 $R_{opt.}=-0.15$)에 그리고 논피는 줄기와 뿌리, 두 부위 모두 소수성(${\pi}_{opt.}=0.37{\sim}2.40$)에 의존적이었다. QSAR 모델로부터 논피에 대한 선택성 조건은 ortho-치환된 전자 밀게로서 소수성(${\pi}$)이 2.40인 치환체가 phenyl 고리상에 도입되는 경우이었다. 그리고 고활성 분자로서 예측된 2-tolyl 또는 3-tolyl 치환체(${\Delta}pI_{50}=1.26$) 등은 선택성 징후가 엿보이는 화합물이었다.

STB2강의 고온피로강도 특성에 미치는 열처리의 영향 (Effect of Heat Treatment on High Temperature Fatigue Strength Characteristics of STB2 Bearing Steel)

  • 오세규;김연호;이상국;이종두
    • 한국해양공학회지
    • /
    • 제3권2호
    • /
    • pp.138-144
    • /
    • 1989
  • It has been very important in various industry fields to improve the fatigue strength characteristics of bearings such as bearing life, fatigue limit, etc., because such poor properties could result in shortening the machinery life as well as in decreasing the accuracy. However, no successful heat treatment criterion seems to be available at present. In this study, the effect of the $170^{\circ}C\times120min$ tempering cycles repeated after $380^{\circ}C\times80min$ oil quenching for $800^{\circ}C$ spheroidizing-annealed bearing steel (STB2) as base metal on the $120^{\circ}C$ high temperature rotary bending fatigue strength characteristics were investigated, including the effects on hardness, Charpy impact value and micro-structure, in order to seek for the best heat treatment condition finally. The important results obtained are as follows : 1) The optimal cycle of tempering so that the fatigue strength .sigma. could become the highest was the 4th cycle. And it is confirmed that this $\sigma_{F}$ is about 6 times more increased than that of base metal, and about 1.3 times more increased than the case of the 1 cycle tempered. 2) As a result of the investigation for the effects of tempering cycles on hardness, the hardness at the tempering number of 2 thru 5 cyles was not decreased severely ; only about 10% decrease from those of the quenched and 1 cycle tempered case. Such hardness is equivalent to $H_{R}$/C61-62 with no bad effect on anti-abrasion of bearing steel. 3) In the case of 2 thru 5 cycle tempering as well as 1 cycle tempering, the impact value was not so improved comparing with the case of quenching, but an increase of 5 to 10% could be expected at least. 4) It was experimentally confirmed that the control of the mechanical properties improvement such as fatigue strength and fatigue life for bearing steels could be possible by the number of tempering cycles.

  • PDF

STB2강의 고온피로강도 특성에 미치는 열처리의 영향 (Effect of Heat Treatment on High Temperature Fatigue Strength Characteristics of STB2 Bearing Steel)

  • 오세규;김연호;이상국;이종두
    • 한국해양공학회지
    • /
    • 제3권2호
    • /
    • pp.638-638
    • /
    • 1989
  • It has been very important in various industry fields to improve the fatigue strength characteristics of bearings such as bearing life, fatigue limit, etc., because such poor properties could result in shortening the machinery life as well as in decreasing the accuracy. However, no successful heat treatment criterion seems to be available at present. In this study, the effect of the $170^{\circ}C\times120min$ tempering cycles repeated after $380^{\circ}C\times80min$ oil quenching for $800^{\circ}C$ spheroidizing-annealed bearing steel (STB2) as base metal on the $120^{\circ}C$ high temperature rotary bending fatigue strength characteristics were investigated, including the effects on hardness, Charpy impact value and micro-structure, in order to seek for the best heat treatment condition finally. The important results obtained are as follows : 1) The optimal cycle of tempering so that the fatigue strength .sigma. could become the highest was the 4th cycle. And it is confirmed that this $\sigma_{F}$ is about 6 times more increased than that of base metal, and about 1.3 times more increased than the case of the 1 cycle tempered. 2) As a result of the investigation for the effects of tempering cycles on hardness, the hardness at the tempering number of 2 thru 5 cyles was not decreased severely ; only about 10% decrease from those of the quenched and 1 cycle tempered case. Such hardness is equivalent to $H_{R}$/C61-62 with no bad effect on anti-abrasion of bearing steel. 3) In the case of 2 thru 5 cycle tempering as well as 1 cycle tempering, the impact value was not so improved comparing with the case of quenching, but an increase of 5 to 10% could be expected at least. 4) It was experimentally confirmed that the control of the mechanical properties improvement such as fatigue strength and fatigue life for bearing steels could be possible by the number of tempering cycles.

동진강 수계 농업용수 수질평가 (Irrigation Water Qualities along Dong-Jin River Watershed during 1994-1998)

  • 엄미정;최정식;한수곤;김갑철;문영훈
    • 한국환경농학회지
    • /
    • 제19권2호
    • /
    • pp.110-115
    • /
    • 2000
  • 동진강 수계의 수질현황을 파악하기 $1994{\sim}1998$년 까지 $4{\sim}9$월에 월 1회에 걸쳐 5개년간 조사한 결과를 요약하면 다음과 같다. 월별로는 빗물에 의한 희석효과로 7, 8월에 수질이 가장 양호하였으며, 4월이 다소 불량하였으나 수도생육 피해 한계농도에는 미치지 못하는 수준이었다. 지점별 수질현황은 생활하수 유입지인 정읍천과 지천의 폭이 좁은 원평천의 무기성분 함량이 높았으며 동진천 상류지역에서 가장 양호하였다. 연도별 현황은 '94년 이후 '95년까지는 수질이 악화되는 경향을 보였으나 '95년 이후로는 각 성분 함량이 낮았지는 등 점점 양호해지고 있으며 COD함량으로 볼 때 특히, 정읍천의 수질이 개선되고 있음을 알 수 있었다. 양이온과 음이온의 총당량온 4월에 가장 높았고 7, 8월에 가장 낮았으며 양이온/음이온의 당량비는 5월에 높았고 7월이 가장 낮았으며 지점에 따라서는 총당량은 정읍천, 원평천, 동진천 하류, 중류, 상류의 순위였으며 양이온/음이온 총당량 비율은 원평천이 상대적으로 작은 수치를 보였지만 지역간 큰 차이는 보이지 않았다. 수질 중 각 성분 상호간의 상관관계를 보면, 대개의 성분 상호간에 유의성이 높게 나타났으나, $NO_4\;^--N$는 대개의 성분과 유의성이 없었고, $PO_4\;^{3-}-P$도 COD, $NH_4\;^+-N$, $NO_3\;^--N$, $SO_4\;^{2-}$과는 유의성을 보이지 않았다.

  • PDF

Addition of Capsicum oleoresin, Carvacrol, Cinnamaldehyde and their mixtures to the broiler diet II: Effects on meat quality

  • Ipcak, Hasan Huseyin;Alcicek, Ahmet
    • Journal of Animal Science and Technology
    • /
    • 제60권4호
    • /
    • pp.9.1-9.11
    • /
    • 2018
  • Background: In recent years, with the prohibition of antibiotics used as growth stimulants in the nutrition of farm animals, researchers have searched for alternative natural and reliable products in order to be able to sustain the developments experienced during the use of antibiotics and to overcome the possible inconveniences. In this context, studies on evaluation of essential oils in poultry nutrition have been reported to improve the utilization of feed, stimulate the release of digestive enzymes, increase absorption in the stomach and intestines, antimicrobial and anti-parasitic effects and thus, can be an alternative to antibiotics and improve meat quality as well. Indeed, this study has been carried out to explore the effects of the addition of 150 mg/kg capsicum oleoresin (CAP), carvacrol (CAR), cinnamaldehyde (CIN) or their mixture (CAP+CAR+CIN) into the broilers' ration over sensory, physical and chemical properties in breast meat and leg meat. Methods: Experiments were conducted over 400 male and female broiler chicks (Ross-308) in 5 groups (1 control group and 4 treatment groups), each composed of 80 chicks. The control group was fed without feed additives while the second, third, fourth and the fifth groups were fed with 150 mg CAP/kg feed, 150 mg CAR/kg feed, 150 mg CIN/kg feed, and 150 mg CAP+CAR+CIN/kg feed, respectively. Results: Addition of CAP, CAR, CIN or CAP+CAR+CIN had effects on the sensory (of taste, tenderness, juiciness and overall acceptability); physical properties (of $L^*$ value and toughness), the chemical properties (of DM, CF, CP, linoleic, EPA, behenic, MUFA, PUFA and ${\Sigma}n-6$ of the leg meat), the physical characteristics (of toughness and firmness), and the chemical properties (of CF, CP, linoleic, ecosenic, EPA, lignoseric, MUFA and ${\Sigma}n-3$) of the breast meat in comparison to control group. Furthermore, while the treatments had positive impacts on thawing loss, cooking loss and water holding capacity in both breast and leg meat; no effect was observed on pH value and lipid oxidation on day 1, day 4 and day 8. Conclusion: The results strongly suggested that the addition of CAP, CAR, CIN or CAP+CAR+CIN to the rations of the broiler chicks changed the sensory, physical and chemical properties of breast and leg meat. It was also observed that these compounds were more effective when they were added to the ratio as a mixture rather than adding them individually.

RADARSAT과 Landsat TM자료를 이용한 벼 생육모니터링 (Monitoring of Rice Growth by RADARSAT and Landsat TM data)

  • 홍석영;임상규
    • 한국농림기상학회지
    • /
    • 제2권1호
    • /
    • pp.9-15
    • /
    • 2000
  • 날씨ㆍ밤낮에 관계없이 자료를 취득할 수 있는 RADARSAT(C-밴드; 5.3GHz, HH 편광)의 후방산란계수와 태양광에 대한 반사값으로 데이터가 얻어지는 Landsat TM의 자료값(DN; Digital Numbers)을 이용하여 벼 생육과의 관계를 조사하였다. 벼 생육기간 동안 RADARSAT 3시기의 자료를 취득하여 보정 과정을 통하여 지표면의 특성이 잘 나타나는 후방산란계수 (backscatter coefcient)를 산출하였다. 연구지역에서 초장, 엽면적지수, 생체중, 건물중 등 벼의 생육변수를 조사하여 산출된 후방산란계수를 비교하였으며, Landsat TM은 논지역의 6시기 자료값을 산출하여 벼 생육과의 관계를 살펴보았다. 벼의 생육초기 담수상태일 때 논의 후방산란계수 범위는 -22dB--20dB이었고, 벼의 영양생장이 최대에 달했을 때 논의 후방산란계수는 -9dB--8dB 범위로 생육단계별로 뚜렷한 차이를 보였고 생육변수, 초장, 엽면적지수, 생체중, 건물 중 변화와 유사한 경향을 나타내었다 TM 밴드 1, 2, 3의 자료값은 생육후기로 갈수록 낮아졌다가 등숙기에 다시 높아졌고, TM 밴드 4의 자료값은 생육후기로 갈수록 높아졌다가 등숙기에 낮아지는 경향이었다. TM밴드 5와 7의 자료값은 생육기간 동안 계속 증가하여 건물중의 변화추세와 유사하였다. 시계열 RADARSAT과 Landsat TM자료를 이용한 벼 생육모리터링은 전망이 있는 것으로 보인다.

  • PDF

횡력을 받는 넓은 보-기둥 내부 접합부의 거동 평가 (Behavior of Wide Beam-Column Interior Joint with Slab)

  • 이범식;박성식;박지영
    • 토지주택연구
    • /
    • 제3권4호
    • /
    • pp.433-449
    • /
    • 2012
  • 횡력을 받는 넓은 보와 기둥 내부접합부의 거동을 평가하기 위하여 넓은 보-기둥 접합부의 휨강성비와 유효폭 및 슬래브 유무를 변수로 6개의 1/2축소 모델 실험체를 제작하여 구조성능 평가를 수행하여 하중-변형, 연성, 강성 등을 평가하였다. 동 모델을 대상으로 비탄성해석을 수행하여 구조성능평가 결과와 비교하였다. 연구결과 도출된 결론은 다음과 같다. 넓은 보-기둥 내부 접합부는 중진지역인 국내에서 적용하고 있는 부분골조형 구조에 적용이 가능한 것으로 판단된다. 슬래브의 강성이 횡력을 받는 넓은 보-기둥 내부 접합부의 거동에 영향을 미치는 것으로 나타났다. 휨강성비가 2.0이상의 경우 T형보의 플랜지로서 슬래브 유효폭은 넓은 보 유효깊이의 2.0d로 평가되며, 휨강성비가 1.4~2.0일 경우, 슬래브 유효폭의 영향은 고려하지 않아도 되는 것으로 나타났다.

3차원 금속 착제를 Host로 하는 포접 화합물 [$Cd(pn)Ni(CN)_4{\cdot}0.5(CH_3COCH_3{\cdot}H_2O$)의 결정구조 (Crystal Structure of the Three-dimensional Metal Complex Host in Clusion Compound [$Cd(pn)Ni(CN)_4{\cdot}0.5(CH_3COCH_3{\cdot}H_2O$))

  • 박기민;이욱;암본진무
    • 대한화학회지
    • /
    • 제38권6호
    • /
    • pp.435-441
    • /
    • 1994
  • 3차원 금속 착제, Cd(pn)Ni(CN)4를 host로 하는 포접 화합물을 합성하고, X-선 회절 데이타를 이용한 단결정의 구조해석을 하였다. 결정학적 데이타는 다음과 같다. $[Cd(pn)Ni(CN)_4]{\cdot}0.5(CH_3COCH_3{\cdot}H_2O)$, Fw = 387.35, Orthorhombic, $Pn2_1a$, a = 13.950(3) $\AA$, b = 26.713(7) $\AA$, c = 7.628(1) $\AA$, V = 2843(1) $\AA^3$, Z = 4, $D_x=1.81 gcm^{-3}$, $\mu(MoK{\alpha})$ = $28.153cm^{-1}$, T = 297K, 3521개($F_0>3{\sigma}(F_0)$)의 회절 강도에 대한 최종 신뢰도 인자 R = 0.0418이 얻어졌다. 이 포접 화합물은 thiourea 포접 화합물과 유사한 턴넬형의 포접 공간(T-type)을 형성하며, 이런 포접공간 내에 분자당 0.5개의 아세톤과 물분자를 guest로서 받아 들인다. 표제의 포접 화합물은 이미 보고된 바와 같이, 가지달린 유기 guest분자가 host의 기하구조를 T-type으로 이끈다고 하는 host 선택성에 대한 또 하나의 증거가 된다.

  • PDF

기체 분리막의 투과 특성 예측 모델식 개발 (Predictive Thermodynamic Model for Gas Permeability of Gas Separation Membrane)

  • 김종환;홍성규;박상진
    • Korean Chemical Engineering Research
    • /
    • 제45권6호
    • /
    • pp.619-626
    • /
    • 2007
  • 막을 이용한 분리 공정은 상(phase) 변화가 없고 낮은 에너지 소비, 장치의 간소화, 큰 선택성, 가공의 용이성, 낮은투자 및 운용비용 등 여러 가지 장점으로 인하여 다른 방법들에 비해 분리가 간단하다는 장점 때문에 여러 분야에서 광범위하게 응용되고 있다. 여러 가지 기체 분리 방법 중 막을 이용한 기체 분리는 막 층 내에서의 기체 분자의 투과성의 차이를 이용하여 기체 분리를 할 수 있다. 이러한 기체 투과 특성을 예측하기 위해서 본 연구에서는 PDMS, ${\gamma}-radiated$ PDMS, PTFE, PTFE-X 기체 분리막을 선택하였다. 네 가지 분리막의 기체 투과 실험의 결과를 이용하여 열역학적으로 고찰, 분석 후 실험데이터의 reduction 및 regression을 통하여 온도, 압력등의 외부 조건과 기체 분자의 열역학적 특성값에 따른 기체 투과특성 예측식을 개발하였다. 이렇게 개발된 예측식으로 구한 값과 실험데이터를 비교하여 객관적 신뢰성을 확인하였다. 이로 인하여 분리막이 분리 조건과 각각의 기체의 열역학적 특성값($\sigma$, $\varepsilon/k$)으로 기체 투과특성을 알 수 있으므로 예측식을 여러 분야에서 활용할 수 있다 하겠다.

한국에 있어서 제수문구조물의 설계의 기준을 주기 위한 수문학적 연구(류거, 홍수 편) (The furulamelllal study in order to obtain the hydrological design basis for hydrological structures in Korea (Run ofl estimate and Flood part))

  • 박성우
    • 한국농공학회지
    • /
    • 제8권1호
    • /
    • pp.1011-1034
    • /
    • 1966
  • This thesis is the final report which has long been studied by the author to obtain the design basis for various hydrological constructions with the specific system suitable to the natural environmental conditions in Korea. This report is divided into two parts: one is to estimate runoff volume from watersheds and the other to estimate the peak discharge for a single storm. According to the result of observed runoff record from watersheds, it is known that Kajiyama formula is useful instrument in estimating runoff volume from watersheds in this country. But it has been found that this formula shows us 20-30% less than the actual flow. Therefore, when wihed to bring a better result, the watershed characteristics coefficient in this formula, that is, f-value, should be corrected to 0.5-0.8. As for the method to estimate peak discharge from drainage basin, the author proposes to classify it in two ways; one is small size watershed and the other large size watershed. The maximum -flood discharge rate $Q_p$ and time to peak Pt obtained from the observed record on the small size watershed are compared by various methods and formulas which are based upon the modern hydrological knowledge. But it was fou.d that it. was not a satisfied result. Therefore, the author proposes. tocomputate $Q_p$, to present 4.0-5.0% for the total runoff volume ${\Sigma}Q$.${\Sigma}Q$ is computed under the assumption of 30mm 103s in watershed per day and to change the theoritical total flow volume to one hour dura tion total flow rate when design daily storm is given. Time to peak Pt is derived from three parameters which are u,w,k. These are computed by relationship between total runoff volume (ha-m unit)and $Q_p$. (C.M.S. unit). Finally, the author checked out these results obtained from 51 hydrographs and got a satisfied result. Therefore the author suggested the model of design dimensionless unit-hydrograph. And the author believes that this model will be much available at none runoff record river site. In the large size watersheds in Korea when the maximum discharge occurs, the effective rainfall is two consequtive stormy days. So the loss in watershed was assutned as 6Omm/2days,and the author proposed 3-hour-daration hydrograph flow distribution percentage. This distribution percentage will be sure to form the hydrograph coordinate.

  • PDF