• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.64-67
• /
• 1997

In the total artificial heart(TAH), a transcutaneous information transmission system(TITS) is vely important to monitor the TAH status and detect the device failure, and repair the possible problems. First of all, the communication channel(skin) and method were simulated in terms of transmittance, scattering, reflection and absorption, then the system was designed with size reduction including low power consumption and reliability compared to the previous one. The informations are transmitted through the skin(approximately 1cm in depth) by frequency modulated near infrared(NIR) pulses using 780nm laser diodes as transmitters and photodiode as receiver with high speed and high spectral sensitivity. The logic high and low frequencies are 3MHz, 1MHz respectively. The system is a bidirectional data link for more than 38.4Kbps data rate, full-duplex with a bit error rate of less than $10^{-5}$.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.2
• /
• pp.29-35
• /
• 1998

This paper describes architectures and design of a SIMD type parallel image processing chip called SliM-II. The chiphas a linear array of 64 processing elements (PEs), operates at 30 MHz in the worst case simulation and gives at least 1.92 GIPS. In contrast to existing array processors, such as IMAP, MGAP-2, VIP, etc., each PE has a multiplier that is quite effective for convolution, template matching, etc. The instruction set can execute an ALU operation, data I/O, and inter-PE communication simulataneously in a single instruction cycle. In addition, during the ALU/multiplier operation, SliM-II provides parallel move between the register file and on-chip memory as in DSP chips, SliM-II can greatly reduce the inter-PE communication overhead, due to the idea a sliding, which is a technique of overlapping inter-PE communication with computation. Moreover, the bandwidth of data I/O and inter-PE communication increases due to bit-parallel data paths. We used the COMPASS$^{TM}$ 3.3 V 0.6.$\mu$m standrd cell library (v8r4.10). The total number of transistors is about 1.5 muillions, the core size is 13.2 * 13.0 mm$^{2}$ and the package type is 208 pin PQ2 (Power Quad 2). The performance evaluation shows that, compared to a existing array processors, a proposed architeture gives a significant improvement for algorithms requiring multiplications.s.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.60-64
• /
• 2007

In this paper, we designed FFT for European DTV and implemented system with Stratix EP1S25F672C6 FPGA At the implemented FFT, we used SIC architecture. SIC architecture is composed of algorithm-specific processing element, RAM memory, registers, and a central or distributed control unit. Designed FFT was acceptable either 2K or 8K point FFT processing, and is selectable guard interval such as 1/4, 1/8, 1/16, 1/32. Consequently, it was suitable for the standard of DVB-T(Digital Terrestrial Video Transmission System) specification. It resulted in 12% of total logic gate and 53% of total memory bit in Stratix device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.915-916
• /
• 2015

The main sensor of AGV is the guide sensor in order to detect the path, and the sensor consists of 8 or 16-magneto resistance devices arranged by with 10mm. In controlling the AGV posture by using the sensor, AGV is occurred left/right shaking frequently. So, for driving stability of AGV, An accuracy of the sensor should be improved. Therefore, this study proposed sensor signal processing method to improve accuracy of guide sensor, and implemented. The accuracy of sensor in experimentation showed 2.84[mm]. In designing the sensor for controlling AGV posture, the proposed method will be effective.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.59-64
• /
• 2004

We propose a new RLL(run length limited) (2,7) PP(parity preserving) code with 4 RMTR(repeated minimum transition run) for optical recording. The proposed code has better characteristics in terms of density ratio, RMTR, DC(direct current) component suppression, BER(bit error rate) and system complexity than (2,1O) code that currently applied in storage systems and (1,7) PP code that highly recommended as the next generation optical recording system. Some characteristics of the code are described with several simulations. And the proposed code's superiorites in performance is illustrated as compared with the other codes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.58-64
• /
• 2012

We propose a double time reversal (TR) prefilter for high data rate and minimum interference in multi-user indoor communication system. A conventional TR prefilter degrades bit error rate (BER) performance significantly because it cannot remove the interference perfectly. As the symbol duration is close, the BER performance is deteriorated. Since the proposed scheme aims to minimize interference, high data rate is realized without the performance degradation and the complexity of receiver is reduced through an additional prefilter design. Simulation results show that the performance of the proposed scheme is improved as the number of users is increased or the data rate becomes high.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.2084-2100
• /
• 2020

Operating system (OS) kernel function call graphs have been widely used in OS analysis and defense. However, most existing methods and tools for generating function call graphs are designed for application programs, and cannot be used for generating OS kernel function call graphs. This paper proposes a virtualization-based call graph generation method called Acquire in Trap (AIT). When target kernel functions are called, AIT dynamically initiates a system trap with the help of a virtualization technique. It then analyzes and records the calling relationships for trap handling by traversing the kernel stacks and the code space. Our experimental results show that the proposed method is feasible for both Linux and Windows OSs, including 32 and 64-bit versions, with high recall and precision rates. AIT is independent of the source code, compiler and OS kernel architecture, and is a universal method for generating OS kernel function call graphs.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.61-64
• /
• 1999

기존의 CELP 보코더에서, 무성음에 대한 별도의 처리 없이 유성음과 동일하게 처리하였다. 유성음과 무성음은 발성모델측면에서 임펄스열과 랜덤 잡음으로 각각 다름에 도 불구하고 동일하게 처리함으로써 합성음에서 음질의 저하 및 계산량과 전송률 측면에서 손실을 가져왔다. 또, U/V(Unvoiced /voiced) 분류기를 사용하는 경우에는 U/V 분류기의 성능에 따라 합성음의 음질저하의 정도의 차이가 심하다. 본 논문에서는 에러율과 전처리 계산량을 쳐소로 할 수 있는 U/V 분류기를 사용하여 CELP 보코더에서 전송률을 감소시키는 방법을 제안한다. CELP 보코더에서는 스펙트럼 정보를 LPC 파라미터로 추출한 후 다시 전송형 파라미터인 LSP(Line Spectrum Frequency)로 변환한다 새로운 린/V 분류기는 이 LSP 파라미터를 이용한다. LSP 파라미터의 주파수영역 분포도와 간격정보를 이용하여 U/V를 결정하게 된다 제안한 방법을 5.3kbps ACELP에 적용하여 성능 평가를 실시하였다 실험결과 음질의 저하 없이 $5.6\%$ (280bps)의 전송률을 감소할 수 있었다.

• The Journal of Society for e-Business Studies
• /
• v.5 no.1
• /
• pp.55-73
• /
• 2000

Recently; EC(Electronic Commerce) is increasing with high speed based on the expansion of Internet. EC which is done on the cyber space through Internet has strong point like independence from time and space. On the contrary, it also has weak point like security problem because anybody can access easily to the system due to open network attribute of Internet. Therefore, we need the solutions that protect the security problem for safe and useful EC activity. One of these solutions is the implementation of strong cipher algorithm. NC(Nonpolynomial Complete) cipher algorithm proposed in this paper is good for the security and it overcome the limit of current 64bits cipher algorithm using 128bits key length for input, output and encryption key, Moreover, it is designed for the increase of calculation complexity and probability calculation by adapting more complex design for subkey generation regarded as one of important element effected to encryption. The result of simulation by the comparison with other cipher algorithm for capacity evaluation of proposed NC cipher algorithm is that the speed of encryption and decryption is 7.63 Mbps per block and the speed of subkey generation is 2,42 μ sec per block. So, prosed NC cipher algorithm is regarded as proper level for encryption. Furthermore, speed of subkey generation shows that NC cipher algorithm has the probability used to MAC(Message Authentication Code) and block implementation of Hash function.

• Journal of Nutrition and Health
• /
• v.20 no.1
• /
• pp.54-64
• /
• 1987

The purpose of this study is to computerize all the necessary information on the daily food value and nutritional status for individuals and groups. In this research, a FOCUS-16jXT (16 bit personal computer ) compatible with IBM-PCjXT was used, and the database files and programs were created by using the dBASEIII package. The food life evaluation system consists of 3 subsystems of Reference, Nutrition Status Assessment and Food Source. The findings are summerized a8 follows: 1. Reference: This subsystem enables users to proceed to the next step, if necessary, by describing each subsystem. 2. Nutrition Status Assessment. 1) Food Habit Assessment: This subsystem determines whether the user has a good food habit or not, based on the answers for ten questions about daily food life. 2) Obesity Assessment: This subsystem calculates Broca index, which is used as a indicator of obesity. 3) Nutrient Intakes: When personal data such as age, sex, weight, height and food consumptions are input, it is possible to calculate the followings. i) Comparison between the amounts intaked and the recommended dietary daily allowances of various nutrients ii) Nutrient intakes from each food group and their composition rates for the nutrients iii) Nutrient intakes per unit body surface area iv) Composition of lipid intake 3. Food Sources: The appropriate food sources for the lacking nutrients will be recommended to the subjects.