• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.858-863
• /
• 2020

We experimented with the particle-settling velocity and CHCl3 absorption efficiency of seven activated-carbon and analyzed seven heavy metal contents by elution for application to the field treatment of sunken HNS on the marine seabed. The mean particle-settling velocity was in the range 0.5-8 cm/s, except when the 8-20 mesh was used. The larger the HNS particle, the faster the particle-settling velocity was, and the CHCl3 absorption efficiency increased considerably owing to the larger surface area. In addition, the elution test results showed that the total Zn and As contents in >100-meshed activated carbon was higher than the contents criteria for the standard for water-treatment agents, and Cr, Zn, and As were released at higher concentrations than those released by other activated-carbon groups. Taken together, the CHCl3 absorption efficiency, settling velocity, and elution test results suggested that the 20-60, 20-40, and 2mm&down mesh activated-carbon adsorbents could be applied to the field treatment of HNSs and that the minimum required amount for field treatment were 0.82, 0.90, and 1.28 ton/㎘, respectively, as calculated based on the HNS-adsorption-capacity priority.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.205-211
• /
• 2004

The purpose of this study is to investigate shear strengthening effects and behaviour of RC beams strengthened in shear by Carbon Fiber Mesh(CFM) and mortar for fixing CFM to concrete. Test parameters in experiment are shear span-to-depth ratio, layout of CFM and number of clip. From the test, it was shown that the governing failure patten was the bond failure between cover mortar and RC beam initiated at about 60% of maximum strength. And the strength of CFM was developed up to 19.6% of it's maximum tensile strength when the specimen reached to failure. The most effective enhancement using CFM and mortar were to attach CFM diagonally to concrete in a/d of 1.0 and increase the number of cilps in a/d of 1.5, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2005

An aerodynamic shape optimization technique has been developed for helicopter rotor blades in hover based on a continuous adjoint method on unstructured meshes. The Euler flow solver and the continuous adjoint sensitivity analysis were formulated on the rotating frame of reference for hovering rotor blades. In order to handle the repeated evaluation of the design cycle efficiently, the flow and adjoint solvers were parallelized using a domain decomposition strategy. A solution-adaptive mesh refinement technique was adopted for the accurate capturing of the tip vortex. Applications were made for the aerodynamic shape optimization of Caradonna-Tung rotor blades and UH60 rotor blades in hover. The results showed that the present method is an effective tool to determine optimum aerodynamic shapes of rotor blades requiring less torque while maintaining the desired thrust level.

• Journal of the Korean Chemical Society
• /
• v.10 no.2
• /
• pp.54-58
• /
• 1966

By means of aqueous oxidation in ammonia solution, metallic zinc and sulfur in marmatite were leached. In this study, it was found that the concentration of ammonia was extremely influenced on the oxidation ratio of Zn and S, and the more the leaching temperature was low, the more their leaching ratio was decreased. The maximum leaching ratio to the contents in marmatite was obtained at the following conditions. Particle size 270 mesh above, $NH_3$ conc, 25%, Press. 4.2 kg/$cm_2$, Temp.$ 60 ^{\circ}C$, Time 20hrs. Leaching ratio; Zn 55% and S 50%.

• Korean journal of food and cookery science
• /
• v.7 no.2
• /
• pp.75-80
• /
• 1991

Millet Nochi is a kind of Korean traditional food which is not well known to the general public. This study was crried out in order to elucidate the cooking method and investigate the changes of textural properties during retrogradation. Cooking method for millet Nochi were as follows. 1. Millet is soaked in water for 3 hours, mashed, sifted by 20 mesh 3 screen. 2. The millet flour is mixed with malt (amount of malt is 0.025 times of millet flour by weight) 3. This mixture is steamed for 20 minutes. 4. Steamed mixture is again mixed with the same amount (0.025 times of millet by weight) of malt. 5. The mixture is incubated at $60^{\circ}C$ for 2 hours. 6. After incubation, the mixture is panfried. 7. The changes of textural properties during 30 freeze-thaw cycles, except adhesiveness were not significantly appeared.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.373-381
• /
• 1996

Algal biomass was used in our study in order to remove some metals. After packing of 40~60 mesh algae powder into column for use of metal adsorbent, the metal solution of 1mL/min of flow rate was eluted to adsorb in algae. More amount of Cu(II) or Zn(II) ion in green algae, Ulva pertusa Kjellman than in brown algae, Sargassum horneri (Turner) C. Agarch were adsorbed and Cu(II) ion was more adsorbed in both algae than Zn(II) ion. Recovery of metal from algae is showing higher in acidic or neutral than in alkalic conditions. Cu(II) ion is recovered relatively higher than Zn(II) ion in our system.

• Food Science and Preservation
• /
• v.7 no.3
• /
• pp.267-272
• /
• 2000

Microwave-assisted extraction (MAE, 2,450 MHz), which is known as a rapid and more environmental-friendly process than current extraction methods, was applied to oleoresin extractions from dried pepper. As fundamental parameters of MAE, optimum conditions were found, such as 60 mesh in particle size of the sampes, 1:10(g/mL) powders was high at lower concentrations of ethanol, whereas capsanthin content remarkably increased at more than 75% of ethanol concentration. The results showed that MAE of oleoresin and capsanthin from red pepper powders was successful in 3 to 5 min of the extraction time.

• Microbiology and Biotechnology Letters
• /
• v.20 no.3
• /
• pp.324-328
• /
• 1992

In order to develop more economic processes, continuous ethanol fermentation from starchy raw materials in a pilot scale multi-stage CSTR was investigated. Ethanol fermentation could be successfully operated for 30 days with naked barley and 60 days with cassava, respectively. Starchy raw materials used for this study were ground and passed through a 20-mesh sieve for low temperature cooking. Under the optimized conditions, the overall productivity of cassava was $1.27g/{\ell}{\cdot}h$ with an ethanol concentration of 9.51% (v/v), which was higher about 2 times than that obtained from a conventional batch system in industrial scale.

• Microbiology and Biotechnology Letters
• /
• v.42 no.3
• /
• pp.232-237
• /
• 2014

We investigated the effects of silica gels on the reduction of the crystallization time for the purification of vancomycin. The shortest crystallization time for vancomycin was obtained when silica gel with a pore diameter of $40-60{\AA}$ and with a particle diameter of 230-400 mesh was used as the material. The use of silica gel as a surface area increasing material dramatically reduced the crystallization time four fold (6 h) when compared with the results where the surface area had not been similarly increased. In addition, the crystal size of vancomycin was decreased with the addition of silica gel. This improved crystallization process has a significant effect on the convenience and feasibility of the purification step for vancomycin.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.77-94
• /
• 1991

A finite difference method based on MAC method is used to simulate free-surface waves around a ship. Euler equations and continuity equation are differentiated using the forward time and central space, and solved by time marching scheme. By the employment of variable mesh system in horizontal and vertical direction, the numerical accuracy of wave simulation results is grossly improved. To verify the improvement of numerical accuracy, some numerical simulations are accomplished for Wigley, Series 60($C_{b}$=0.6) and a bulk carrier model. The computational results are compared to the various experimental data and show good agreements.