본 연구는 PC(polycarbonate) 기판 위에 소스(source)/드레인(drain) 전극으로 Ag 페이스트를 스크린 인쇄하여 OTFT(organic thin film transistor)를 제작하였다. 또한 이렇게 제작된 OTFT를 적용하여 OTFT-OLED(organic light emitting diode) 어레이를 제작하였으며 OTFT의 소스 및 드레인 전극과 더불어 데이터 배선전극을 Ag 페이스트를 이용하여 형성하였다. Ag 페이스트는 스크린 마스크의 mesh에 따라 325 mesh용과 500 mesh용을 사용하였으며, 325 mesh용 페이스트는 선폭 60 ${\mu}m$, 500 mesh용 페이스트는 선폭 40 ${\mu}m$까지 인쇄가 가능하였다. 그리고 면저항은 각각 $60m{\Omega}/\square,\;133.1m{\Omega}/\square$이었다. 제작된 OTFT의 성능은 이동도가 자각 0.35 $cm^2/V{\cdot}sec$와 0.12 $cm^2/V{\cdot}sec$, 문턱전압 -4.7 V와 0.9 V이었으며, 전류 점멸비는 ${\sim}10^5$이었다. OTFT-OLED 어레이는 인쇄성이 우수한 500 mesh용 Ag 페이스트를 사용하였으며 OTFT의 채널길이를 50 ${\mu}m$로 설계하여 제작하였다. OTFT-OLED 어레이의 화소는 2개의 OTFT, 1개의 캐패시터 그리고 1개의 OLED로 구성하였고, 크기는 $2mm{\times}2mm$이며, 해상도는 $16{\times}16$ 이다. 제작된 어레이는 일부 불량 화소를 포함하고 있지만 능동형 모드로 동작함을 확인할 수 있었다.
Because of their exclusive features, millimeter wave directive mesh networks can be considered for small cell backhaul support in urban environments. For this purpose, a network of closely spaced stations has been considered with very directive line-of-sight links operating in the 60-GHz band. An attempt is made to evaluate channel response and interference behavior in such a network, taking into account the effect of building blockage. A simple grid of building blocks is considered as the propagation environment, and wave propagation is simulated using 2.5-dimensional (2.5D) ray tracing (2D with ground effect) to calculate the received signal at different nodes in the network. The results are compared with free space predictions and used to evaluate interference at all nodes in the channel and describe certain characteristics of links, such as the delay profile and the correlation length.
담배가루이가 매개하는 토마토황화잎말림병(TYLCV) 예방을 목적으로 해충의 유입을 원천적으로 차단할 수 있는 방충망 설치에 대한 연구가 수행되었다. 담배가루이가 60메쉬망을 통과는 할 수 있지만, 83메쉬 이상의 방충망으로 완전히 차단할 수 있었다. 담배가루이의 온실 내 유입을 차단하기 위한 3연동 온실($21.0{\times}18.3m$)에 60메쉬 망실, $5.65(W){\times}2.05(H){\times}18.45(L)(m)$을 별도로 설치하였다. 60메쉬 망실 내에서 담배가루이 산란과 아메리카잎굴파리 가해흔적이 출입문 쪽에 국부적으로 몇몇 발견되었으나, 토마토황화잎말림병에 걸린 토마토는 없었다. 토마토의 초장, 엽장, 엽폭, 화방수, 당도 조사결과 망실유무에 따른 처리구간의 차이는 없는 것으로 나타났고, 수량에서도 유의성 있는 차이를 발견할 수 없었다. 실용적인 관점에서 방충망의 설치는 유리온실이나 장기간 사용가능한 비닐온실 등의 측창과 천창 및 출입구에 설치할 경우 유망할 것으로 생각되었다.
The effect of quartz which exists in clays, especially in kaolin used for the production of chamotte sagger, on the strength of refractory was examined. In this study, a mixture of chamotte 50%, kaolin 25%, plastic clay 25% in ternary component system was selected as a batch composition. To this mixture 1%, 3% and 5% of feldspar and sericite were added respectively. The plastic clay used here was separated under 170 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. In order to change the particle size and the content of quartz, the kaolin was separated under 60, 115, 170 and 325 mesh by wet process, substituted quartz for coarse parts of it. Chamotte was classified into three grades, coarse (5-10mesh): medium (10-20mesh): fine(20-115mesh) and the ratio was 1:1:1. Samples were formed in 0.8xIx10cm size with 12.5% water at 160kg/$\textrm{cm}^2$ pressure, and fired at 130$0^{\circ}C$ for 1 hr. The fired samples were ivnestigated by means of x-ray diffraction analysis and microscopic observation, and the physical properties of them were also examined, such as firing shrinkage, apparent specific gravity and bulk specific gravity, apparent porosity, water absorption and modulus of rupture. The obtained results are as follows: 1. When screened kaolin with low content of quartz was added to fixed chamotte-plastic clay system, the sample lowered modulus of rupture and increased apparent porosity as the size of kaolin became finer. 2. When kaolin under 325 mesh with 7.2-15.81% quartz between 60-325 mesh was added to fixed chamotte-plastic clay system, the sample had higher apparent porosity and lower modulus of ruputure as the size and the amount of quartz became larger. 3. The addition of feldspar and sericite to chamotte-plastic clay system improved apparent porosity and modulus of rupture. The effect of feldspar was better when quartz content was low, although that of sericite was better than quartz content was high.
International Journal of Aeronautical and Space Sciences
/
제11권1호
/
pp.1-9
/
2010
Numerical simulation of unsteady flows around helicopters was conducted to investigate the aerodynamic interaction of main rotor and other components such as fuselage and tail rotor. For this purpose, a three-dimensional inviscid flow solver has been developed based on unstructured meshes. An overset mesh technique was used to describe the relative motion between the main rotor, and other components. As the application of the present method, calculations were made for the rotor-fuselage aerodynamic interaction of the ROBIN (ROtor Body INteraction) configuration and for a complete UH-60 helicopter configuration consisted of main rotor, fuselage, and tail rotor. Comparison of the computational results was made with measured time-averaged and instantaneous fuselage surface pressure distributions for the ROBIN configuration and thrust distribution and available experimental data for the UH-60 configuration. It is demonstrated that the present method is efficient and robust for the simulation of complete rotorcraft configurations.
The mesh selectivity of a drum shaped pot for finely-striate buccinum (Buccinum striatissimum) was conducted a total of eight times with four different mesh sizes (22, 35, 50 and 60 mm) from May to September, 2019 in the eastern coastal waters of Korea. The size selectivity analysis was estimated by the SELECT method to express logistic selectivity curves. In the results, the catch of finely-striate buccinum was occupied about 90% in the total catch weight. The equation of the master curve of selectivity was estimated to s(R) = exp(-7.778R+9.983)/[1+exp(-7.778R+9.983)]. The relative shell height of 50% selection was 1.284 and the selection range (SR) was 0.282. The optimal mesh size for 50% selection on the minimum maturation size (75 mm, Shell height) was estimated more than 60 mm by the master selectivity curve.
The opening temperature of emit heat, caloric value and decomposition hear were investigated by DSC & TGA in order to find the hazard of sanitary feed-stuff, also explosion hazard of dust was observed with electrical ignition after fodder dispersion by compressed air. Then opening temperature of emit heat of supporting gas. $O_{2}$ was much lower than inert gas. Ar. and caloric value increased 20. and the particle size of sanitary feed-stuff were appeared fire or explosion at 50/60 mesh and 60/80 mesh.
Sieve shaker와 Elzone particle size analyzer에 의한 두 가지 방법으로 제분방법에 따른 입자크기를 조사하였다. 제분방법별로 제조한 쌀가루의 입도분포를 측정한 결과 입자크기는 제분방법에 따라 영향을 받았으며 표준망체를 이용한 Sieve shaker 방법보다 Elzone particle size analyzer를 사용한 방법이 정확도가 우수하였다. 입도분포를 측정한 결과 Pin mill의 경우 $200{\sim}270$mesh가 30.38%으로 가장 많았고 $60{\sim}500mesh$의 분포도를 가졌다. Colloid mill은 $140{\sim}200mesh$가 가장 많았으며, $40{\sim}500mesh$의 분포도를 가졌다. Micro mill은 500mesh 이상이 41.62%로 가장 많았고 $140{\sim}500mesh$의 분포도를 보여주었다. Jet mill은 500 mesh 이상의 분포도로 입자크기가 가장 미세하였다. 또한 미세한 입자일수록 L간과 a값이 증가하였다. 쌀가루의 집합체를 살펴본 결과 습식제분은 분리된 쌀가루의 집합체형태로 구성되어 있고 건식제분은 분활된 조직체로 구성되었다. 전자주사현미경은 Elzone particle size analyzer 방법과 같은 입자분포도를 나타내었고 제분방법에 따라 구조의 특성을 보여주었다.
천연 미네랄 성분을 함유한 medilite 침출수를 이용한 녹차 추출물에 의한 화학적 성분조성과 항산화 활성을 증류수 침출 녹차 추출물과 비교하였다. 항산화 활성은 DPPH법 및 microsone 생체막 지질 과산화물 생성정도를 나타내는 TBARS법으로 측정하였다. 녹차 추출물의 총 폴리페놀성 화합물과 추출 수율은 medilite 325 mesh, 600 mesh, DW 추출물 순으로 나타났다. DPPH법에 의한 0.05%와 0.1%의 녹차 추출물에서 항산화 활성은 60.95% ∼ 64.15% 사이였다. 간 homogenate 및 microsone 생체막 지질 과산화물 생성 억제 정도는 medilite 325 mesh 및 600 mesh 침출 녹차 추출물에 비해 증류수 침출 녹차 추출물에서 현저히 억제되었다. 특히 Fe 함량은 증류수 침출 녹차 추출물에 비해 medilite 325 mesh 및 600 mesh 침출 녹차 추출물에 현저히 높았다 이러한 medilite 침출 녹차 추출물에서 높은 Fe성분 함량은 microsone 생체막 지질 과산화물의 생성 촉진과 관련된 것으로 사료된다. 이상의 결과에서 녹차 추출물 중의 총 폴리페놀성 화합물, 추출 수율 및 미네랄 성분은 증류수에 비해 medilite 침출수를 이용함으로써 대체적으로 증가하는 결과를 얻었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.