• Resources Recycling
• /
• v.19 no.2
• /
• pp.35-44
• /
• 2010

As the competition of acquiring foreign resources of advanced countries and developing countries intensifies, South Korea which imports most of the mineral resources, started to re-develop domestic mines for molybdenite ore, in order to secure stable natural resources and decrease foreign currency expense. In this study, as a result of performing XRD and composite analysis on Dongwon NMC's (the sole producer of molybdenite ore in Korea) final concentrate(Mo 50.4%), Quartz, Grossular and Hedenbergite exists as impurities and size analysis showed that in relative coarse particle range of 60~140 mesh was formed with high grade over 57% Mo. Also, a test was performed to confirm the possibilities of increasing the grade and recovery of Dong won NMC's final ore. As a result, Mo 58.6% ($MoS_2$ 97.83%) was obtained with 87.47% recovery at a condition of 15 minutes grinding time, Kerosene as collector 0.1 l/ton, AF as Frother 65 7.2 l/ton, wash water of 630 ml/min and air flow rate of 1,197 ml/min.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.1
• /
• pp.1-6
• /
• 1996

The physical properties of mulberry leaf noodle were compared with 3 level of rates(5, 10, and 20%) of mulberry leaf powder to wheat flour and 6 times of leaf picking seasons. The contents of rutin, ${\gamma}$-aminobutyric acid (GABA) and inorganic compounds in mulberry leaf were analyzed with seasons and pretreatment of mulberry leaf. Dry matter content of mulberry leaf powder was about 20%. The leaf powder passed through 100 mesh sieve was 6% from fresh leaf weight. Through the taste test, 10% mulberry powder rate to flour was the best. Rutin content decreased with season, 319mg/100g DW on May 13, but 111mg/100g DW on May 26 and 43mg/100g DW on June 9. Rutin in dry leaf lost 37% by steaming and 83% by in boiling water. CAGA content on leaf decreased with season, 27.7mg/100g FW on May 13 and about 60% of on June 9.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.686-689
• /
• 2005

This study was conducted to investigate the effect of ammonium and nitrate nitrogen removal to applied voltage, electrolytic time and activated carbon packing height. Batch bipolar packed bed electrolytic cell reactor was packed with $4{\times}8$ mesh granular activated carbon (GAC). Afterward electrolysis was performed in 20 V for 30 min. As a result, as the filling height adjusted to 80 mm high, the removal efficiency of ammonium nitrogen was 99.9%. and as the electrolytic time varied to 60 min, the removal efficiency of ammonium nitrogen was 97.6%. and in case of continuous electrolytic treatment of ammonium and nitrate nitrogen removal efficiency of total nitrogen was over 80% in bipolar packed bed electrolytic cell reactor for 72 hours as the packing height, sample concentration and input rate of sample adjusted to 280 mm, 30 mg/L, 6.7 mL/min, respectively.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.574-580
• /
• 1998

The technical feasibility of removing cholesterol from milk fat by supercritical carbon dioxide $(SC-CO_2)$ extraction followed by adsorption on different adsorbents and of fractionating milk fat into different fatty acid composition at $40^{\circ}C/276$ bar was investigated. Cholesterol could be selectively removed from milk fat by adsorption on a typical commercial florisil with $SC-CO_2$ extraction. Lower weight ratio of milk fat feed to florisil showed higher reduction of cholesterol, but gave lower yield in the milk fat fractions. The effective capacity of florisil for removing cholesterol from milk fat was 2.0g/g, which is the ratio of the fat feed to the adsorbent for 89% cholesterol reduction with a fat yield of 57.5%. Fatty acid composition showed higher short-chain and lower unsaturated long-chain fatty acids in the extracted fractions. Milk fat fractionation method by supercritical fluid extraction in coupled with adsorption would appear suitable for removing undesirable ingredients such as cholesterol and for enriching short-chain fatty acids in the fractions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1754-1759
• /
• 2008

To produce plastic parts that have fine pattern through conventional injection molding, a lot of difficulties follow. Therefore, rapid heating and cooling methods are good candidates for manufacturing injection-molded parts with micro/nano patterns. In this study, we adopted the E-Mold patent technology. The mold for E-Mold technology has a separate heated core with micro heaters. It is very important to optimize the lay-out of the heaters in heated core because it influences both control and distribution of mold temperature. We developed a optimization method of heating line lay-out by using commercial softwares and compared the output with the experimental results. We used Pro-Engineer Wildfire 2.0 for the mold design, ICEMCFD for mesh generation, and FLUENT for heat transfer simulation. The simulation results showed the temperature profile from $60^{\circ}C$ to $120^{\circ}C$ or $180^{\circ}C$ during heating and cooling process which were compared with the injection molding experiments. We concluded that the simulation could well explain the experimental results. It was shown that the E-Mold optimization design for heater lay-out could be available through the simulation.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.29-36
• /
• 2016

The characteristics analysis and pH neutralization test were carried out to use of slurry generated from recycling processes of construction wastes. D (5.0) of raw sludge was $42.4{\mu}m$ and over 60 % of sludge distribute under 45 um (-325 mesh). Muscovite and carbonate minerals were main minerals of fine particles, and the portion of carbonate minerals increased as particle size decreased. Although the more heavy metals were observed in the finer particle size, the contents was found to be less than Korean contaminated soil regulation (area 2). The effects of flocculants addition for accelerating solid-liquid separation were negligible because the slurry already contains excess of coagulant added in the waste concrete recycling process. It was difficult to neutralize the sludge supernatant due to high pH (about 12) by adding acids, but the introduction of $CO_2$ decreased the pH to 8.5, The precipitate recovered during $CO_2$ introduction was determined to be $CaCO_3$ with XRD, and it indicates that high pure $CaCO_3$ could be obtained during the process.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.sup1
• /
• pp.55-60
• /
• 2001

Objective : The purpose of the present study was to examine neurologic changes, fusion rate and degree of kyphosis from the surgical results of those patients who underwent multi-level anterior interbody fusion and internal fixation. Methods : Among 63 cases of the patients who received multi-level anterior interbody fusion and internal fixation in 5 years between 1995 to 1999 at the neurosurgery department, we performed a retrospective study in 52 cases that could be followed up with dynamic view imaging ; the results were compared and analyzed. The analysis was based on the results of history taking, physical findings and radiologic findings, and Odom criteria were used to classify those cases with neurologic changes. Results : Among those 52 cases in whom the follow-up was possible for at least a year and dynamic view imaging was possible, bone fusion was seen in 93% of the trauma cases and 95% in the non-trauma cases and overall bone fusion was observed in 94% of the cases. Bone fusion was seen in 93% of the autobone cases, 95% of the allobone cases, and 94% of the Mesh cases. Radiologic changes were observed by comparing the lateral view after surgery ; kyphosis was seen in 53% of the autobone cases, in 70% of the allobone cases, and in 35% of Mesh cases ; in 45% and 60% of the non-trauma cases and trauma cases, respectively ; and in 55% of the 2 level fusion cases and 46% of the 3 level fusion cases. Neurologic changes classified according to Odom criteria showed excellent result in 48% of all the cases, good in 23%, fair in 4%, and poor in 25%. Conclusion : Even those cases with multi-level fusion, a high fusion rate could be obtained by performing anterior interbody fusion and internal fixation ; those cases with kyphosis were related more with the presence or absence of posterior compartment injury rather than the fusion level ; and those trauma cases showed not much difference in the fusion rate compared with non-trauma cases but had a high possibility of kyphosis.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.11-17
• /
• 2002

This study was performed to determine the characteristics of particleboard made from three-months-old bamboo, (Phyllostachys nigra var henonis Stapf) grown in Damyang district, Korea. Total 60 particleboards were manufactured with 1% of liquid wax emulsion using urea-formaldehyde resin content 9%,11% and 13%, respectively. The particle boards consisted of three layers, in which face layer had the same proportion of a weight 25% of the particleboard each. And the core layer had a weight 50% of the board. The core layer and face layer had the particle dimension passing 6 mesh (3.35 mm), 12 mesh (1.70 mm), respectively. The study was carried out to determine the effect of the growing time of 3 months and 3 years on particleboard properties. The physical and mechanical properties of boards were measured and compared to the Korean standard (KS) requirements of particle boards. The results were as follows; 1. The longer the growing time, the higher the density of bamboo. Density of the upper part of bamboo showed higher than that of lower part. 2. Density and moisture content of the two particle boards did not show significant differences. Three-months-old bamboo particleboard gave higher thickness swelling than three-years-old bamboo particleboard. Bamboo particleboard passed the thickness swelling test of KS. 3. The static bending and internal bond strength of three-months-old bamboo particleboard were higher than those of three-years-old bamboo. Increase of resin contents in bamboo particleboard increased bending and internal bond strength, proportionally. Strength properties of bamboo particle board were above KS. 4. Formaldehyde emission of all the bamboo particleboards satisfied E₂ level (5.0 mg/L) of KS F 3104.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.3
• /
• pp.598-602
• /
• 2004

In the preparation of jam using Undaria pinnatifida sporophyll, effects of food ingredients to the jam rheology were investigated. The paste was prepared by crushing the sporophyll using chopper and homogenizer with 2.5 times water and then it was filtrated before to make a jam. The sporophyll jam was adjusted to 62$^{\circ}$Brix by heating and concentration. It was a similar to the commercial jam in the gel strength. Among the various treatments, the jam prepared with 60% (w/w) sugar, 0.75% (w/w) high methoxy (HM) pectin and 0.3% (w/w) citric acid showed best quality aspects of both texture profile analysis (TPA) and sensory evaluation. Addition of 0,08% (v/w) synthetic strawberry flavor and 0.5% (w/w) cinnamon powder to sporophyll paste gave a good masking effect for the undesirable sea mustard flavor.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1095-1101
• /
• 2002

An experimental apparatus was prepared to investigate thermal and hydrodynamic characteristics of regenerator at cryogenic temperature under pulsating pressure condition. The regenerator was pressurized and depressurized by a compressor with various operating frequencies. Cold end of the regenerator was maintained around 100 K by means of a liquid nitrogen heat exchanger. Instantaneous gas temperature and mass flow rate were measured at both ends of the regenerator during the whole pressure cycle. Pulsating pressure drop across the regenerator was also measured to see if it could be predicted by a friction factor at steady flow condition. The operating frequency of pressure cycle was varied between 3 and 60 Hz, which are typical operating frequencies of Gifford-McMahon, pulse tube, and Stilting cryocoolers. First, the measured friction factor for typical wire screen mesh regenerator was nearly same as steady flow friction factor for maximum oscillating Reynolds number up to 100 at less than 9 Hz. For 60 Hz operations, however, the discrepancy between oscillating flow friction factor and steady flow one was noticeable if Reynolds number was higher than 50. Second, the ineffectiveness of regenerator was directly calculated from experimental data when the cold-end was maintained around 100 K and the warm-end around 293 K, which simulates an actual operating condition of cryogenic regenerator. Influence of the operating frequency on ineffectiveness was discussed at low frequency range.