• Korean Journal of Microbiology
• /
• v.24 no.3
• /
• pp.288-294
• /
• 1986

The effects of ginseng saponin and its related materials on aflatoxin production by Aspergillus parasiticus NRRL2999 in yeast extract sucrose (YES) medium were studied. Maximal production of aflatoxins by the mold in the medium occurred after 9 days at $28^{\circ}C$. When various concentrations of ginseng saponin were added to the medium aflatoxin productions were significantly reduced (p<0.05) compared to the control after 9 days at $28^{\circ}C$. 0.05% of saponin in the medium greatly decreased aflatoxin synthesis, and no aflatoxins were synthesized by the mold in the medium contained 5.0% of saponin. When various concentrations of saponin diol and triol were added to the medium both ingibitory and sitimulatory effects on alfatoxin production were resulted. Saponin fraction numbers of 1, 2, 4, 5 and 6 decreased aflatoxin production, however the numbers of 3 and 7 stimulated the toxin production. 0.05% of adenosine, guanosine, caffeine and xanthosine in the media inhibited aflatoxin production (p<0.05), but adenine and cytosine increased the production. When 5.0% of saponin was added to the medium aflatoxins were not synthesized at all, but total lipid synthesis and mold growth were highly stimulated. Both the synthesis of total lipid and mold growth were reduced in case of aflatoxin synthesis stimulated.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.984-993
• /
• 1999

The ethanol extracts and its n-hexane fraction of Dystaenia takesimana Kitagawa exhibited growth inhibition on Listeria monocytogenes ATCC 19111, ATCC 19112, ATCC 19113, ATCC 19114 and ATCC 15313. The minimum inhibitory concentration of the ethanol extract and its n-hexane fraction were 50 ppm and below 30 ppm on Listeria monocytogenes respectively. By silica gel column chromatography, the active fraction A8 was obtained from the ethanol extract of Dystaenia takesimana Kitagawa. After three times of column chromatography, the SBD-1 and SBD-2 were separated from the A8 fraction of the ethanol extract of Dystaenia takesimana Kitagawa. Antimicrobial activity of the SBD-l and SBD-2 was lower than that of the A8. And the A8 exhibited growth inhibition on five strains of Listeria monocytogenes at the level of $10{\sim}30$ ppm and the bactericidal effect was confirmed at same the level. The purified antimicrobial active compound was identified as (9z)-heptadeca-l,9-dien-4,6-diyn-3,8-diol, falcarindiol, by EI/MS, $^{1}H-NMR$ and $^{13}C-NMR$.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.405-412
• /
• 2018

Three types of bis[3-(dialkyloxylphosphorothionyl) thio-2-methylpropanyloxy]alkane (BAPA) drived from alkane diol were synthesized. The principal chain of each BAPA had a different carbon number, i.e., 6, 9, and 11. The three types of synthesized BAPA were compared to zinc dialkyl dithiophosphates (ZDDPs) in terms of abrasion resistance. A four-ball test was conducted to evaluate the anti-abrasion performance of the synthesized BAPA according to the length of the principal carbon chain. Each product was added to an additive at a concentration of 1% of the base oil weight, and the wear scar diameter (WSD) was measured as 0.472, 0.459, and 0.480 mm, respectively. Among the BAPA compounds, dialkyl dithiophosphoric acid (DDP), which is the side chain of bis[methacryloyloxy] nonane (BMOO9), was synthesized by varying the carbon number, i.e., 4, 8, and 12, and subsequently the 4-ball test was carried out. The WSD was determined as 0.537, 0.459, and 0.531 mm, respectively. As a result, it was found that when a side chain is short, a thin film is formed. In contrast, a long side chain hindered the formation of a film, and hence the best result was achieved when the carbon number was 8. As for the ZDDPs, the WSD was determined to be 0.563 mm, when measured under the same conditions. The measurements confirm that the synthesized BAPA compounds are superior to the ZDDPs as abrasion resistance additives.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.2
• /
• pp.86-93
• /
• 2008

The chemical composition of the volatile constituents from the leaves and stems of endemic Acanthopanax koreanum and A. chiisanensis collected from Mt. Deokyu was determined by GC and GC/MS spectrometric analysis with the aid of NBS, Wiley Library and RI indice searches. The major constituents identified were ${\delta}-3-carene$ (31.34%), l-limonene (17.01 %), ${\beta}-elemene$(4.53%), trans-p-menth-2-ene-1,8-diol(3.13%), 1,8-cineole (4.73%), 1-dodecen-3-yne (2.64%) and (Z)-3,7-dimethyl-1,3,6-octatriene (3.21%) in A. koreanum, and ${\delta}-3-carene$ (14.78%), limonene (7.24%), t-ocimene (7.22%), ${\alpha}-terpinolene$ (8.76%), ${\gamma}-elemene$ (4.32%), ${\beta}-selinene$ (7.72%), veridifloral (3.25%) and dodecane (2.44%) in A. chiisanensis.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.559-565
• /
• 2003

An analytical method the determination of benzo(a)pyrene (BaP) and its hydroxylated metabolites, 1-hydroxybenzo(a)pyrene (1-OHBaP), 3-hydroxybenzo(a)pyrene (3-OHBaP), benzo(a)pyrene-4,5-dihydrodiol (4,5-diolBaP) and benzo(a)pyrene-7,8-dihydrodiol (7,8-diolBaP), in rat urine and plasma has been developed by HPLC/FLD and GC/MS. The derivatization with alkyl iodide was employed to improve the resolution and the detection of two mono hydroxylated metabolites, 1-OHBaP and 3-OHBaP, in LC and GC. BaP and its four metabolites in spiked urine were successfully separated by gradient elution on reverse phase ODS $C_{18}$ column (4.6 mm I.D., 100 mm length, particle size 5 ㎛) using a binary mixture of MeOH/H₂O (85/15, v/v) as mobile phase after ethylation at 90 ℃ for 10 min. The extraction recoveries of BaP and its metabolites in spiked samples with liquid-liquid extraction, which was better than solid phase extraction, were in the range of 90.3- 101.6% in n-hexane for urine and 95.7-106.3% in acetone for plasma, respectively. The calibration curves has shown good linearity with the correlation coefficients (R²) varying from 0.992 to 1.000 for urine and from 0.996 to 1.000 for plasma, respectively. The detection limits of all analytes were obtained in the range of 0.01-0.1 ng/mL for urine and 0.1-0.4 ng/mL for plasma, respectively. The metabolites of BaP were excreted as mono hydroxy and dihydrodiol forms after intraperitoneal injection of 20 mg/kg of BaP to rats. The total amounts of BaP and four metabolites excreted in dosed rat urine were 3.79 ng over the 0-96 hr period from adminstration and the excretional recovery was less than 0.065% of the injection amounts of BaP. The proposed method was successfully applied to the determination of BaP and its hydroxylated metabolites in rat urine and plasma for the pharmacokinetic studies.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.257-264
• /
• 1995

The $\beta$-chitin derivatives were synthesized by reacting $\beta$-chitin with chloropropane, propyleneoxide and chloropropane diol to form propyl chitin (PPC), hydroxypropyl chitin (HPC) and dihydroxypropyl chitin (DHPC), respectively. Cast films from $\beta$-chitin and $\beta$-chitin derivatives solutions degraded by Iyrozyme in pseudo-extrra cellular fluid (PECF) solutions, at pH1.2, pH6.7 and pH8.2. Chitin derivatives rapidly degraded compared with virgin $\beta$-chitin within the first week. DHPC showed the best biodegradation among these derivatives.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.888-895
• /
• 2020

Ulmus genus has excellent various physiological activities, including anti-ulcer, antioxidant, antibacterial, anti-cancer, immunity, and homeostasis maintenance effects, and it is known to have many additional drug effects And one of reasons for these excellentbiological activities is a flavan-3-ol chemical group in Ulmus genus. In this study a new flavan-3-ol compound was identified in Ulmus davidiana var. japonica. A flavan-3-ol,(2R,3S)-7-[(2S,3R,4R)-3,4-dihydroxy-4-(hydroxymethyl)oxolan-2-yl]oxy-2-(3,4-dihydroxyphenyl)-3,4-dihydro-2H-chromene-3,5-diol, named as catechin 7-O-beta-D apiofuranoside, was isolated from the stems and barks of Ulmus davidiana var. japonica for. suberosa, which is a species belonging to the genus Ulmus, growing throughout the Korea peninsula. The structure was elucidated by various spectroscopic methods including high-resolution TOF mass spectrometry, ¹H-NMR and ¹³C-NMR spectrometry and comparison with chemical structures of defined compounds.

• Journal of Biomedical Engineering Research
• /
• v.15 no.1
• /
• pp.89-96
• /
• 1994

The ether-type chitin derivatives were synthesized by reacting chitin with chloropropane, propylene oxide and chloropropane diol to form propyl chitin(PPC), hydroxypropyl chitin(HPC) and dihydroxypropyl chitin(DHPC). These derivatives formed a lyotropic cholesteric liquid crystallinity in concentrations over 30 wt% solution in formic acid (99%). Cast films from liquid crystalline solutions were degraded by lysozyme in pseudo-extra cellular tluid(PECF)solutions, at pH 1.2, pH 6.7 and pH 8.2. Three ether-type chitin derivatives rapidly degraded within the first week, and showed a decreased mechanical strength in neutral pH range. Dihydroxypropyl chitin showed the best biodegradation among these derivatives.

• Fibers and Polymers
• /
• v.1 no.1
• /
• pp.12-17
• /
• 2000

Thermotropic polyurethanes were synthesized from 1,6-hexane diisocyanate (HDI) as a diisocyanate, 1,6-hexane diol (HD), and rigid diols containing imide unit such as N,N＇-bis(4-hydroxyphenyl)-3,4,3＇,4＇-biphenyl-dicarboxyimide (BPDI) or bis-N-(4-hydroxyphenyl)-4,4＇-oxydiphthalimide (ODPI). The effects of structure difference between BPDI and ODPI and composition of HD/BPDl (ODPI) on the thermal and liquid crystalline behavior were studied. Thermotropic polyurethanes with an inherent viscosity of 0.59~0.70 were obtained. The melting temperature of BPDI-based polyurethanes were in the range of 150~$290^{\circ}C$, however, those of ODPI-based polyurethanes were in the range of 150~$190^{\circ}C$. All the polyurethanes based on ODPI (25~100 mole %) clearly exhibited a stable liquid crystalline phase, and BPDI-based polyurethane having 5-25% of BPDT showed a mesophase. The melting and isotropization temperatures ($T_m$, $T_i$) and ΔT($T_i$ - $T_m$) increased with increasing BPDI and ODPI content. The polyurethanes based on BPDI has higher melting points and thermal stability compared to ODPI-based polyurethanes.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.959-962
• /
• 2008

We have performed FlexX docking experiments to predict the best docking poses of 5-androst-16-en-3-ol or 5-androst-16-en-3-one to Boar salivary lipocalin (SAL). Since no steroids were found inside of the binding pocket of the X-ray structure of 1GM6, we tried to find docking structures after opening the pocket using the random tweak option implemented in SYBYL. This operation allowed the ligand to enter the pocket. The best poses generated from FlexX were different from the structures reported earlier, which calculated docking poses by manual docking followed by minimization. Analysis of docking poses allowed us to identify pharmacophores. From this information, virtual screening experiments using UNITY were performed. Among six candidates, 3-(3,7-dimethyloct-6-enylamino)propane-1,2-diol (Leadquest code name: 5755) was chosen for further development. Future work will involve synthesis of some derivatives of 5755 and biological experiments if any derivatives can control the biostimulation and improve reproductive efficiency in pigs.