• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.510-513
• /
• 2002

띠모양의 에미터와 에미터와 정렬된 띠모양의 케이트 구멍을 가진 탄소나노튜브(CNT) 삼극 구조에 대하여 전계방출 시뮬레이션을 수행하였다. 전자방출은 주로 가장자리에서 발생하였으며 에미터와 게이트사이의 간격이 가까워지면 급격히 증가하였다. 전자방출 특성도 상당히 우수하였다. 한쪽 가장자리만을 사용한 삼극구조의 경우에는 방출된 전자의 궤적이 좁은 띠모양으로 형성되어 방향성이 매우 우수하게 나타났다. 띠모양의 에미터 및 게이트로 이어진 삼극구조는 제작이 용이하고 조립할 때 정렬이 쉬운 장점이 있다.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1549-1551
• /
• 1997

In this study, the $\beta$-Polyvinylidene fluoride($\beta$-PVDF) organic thin films were fabricated by physical vapor deposition method as one of the dry-processing methods and applying electric field during the vapor deposition. When the substrate temperature is $80^{\circ}C$, the PVDF organic thin films exhibit the characteristic absorption band of the $\beta$ forms $510cm^{-1}$, $602cm^{-1}$ and $1273cm^{-1}$, and the fraction of $\beta$ form crystals in the total crystalline content was 95%. The molecular structure of PVDF organic thin films were transformed from $\alpha$ to $\beta$ form with increasing of applied electric field and the control of substrate temperature.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.506-510
• /
• 2016

A triple-band (TB) oscillator was implemented in the TSMC $0.18{\mu}m$ 1P6M CMOS process, and it uses a cross-coupled nMOS pair and two shunt $4^{th}$ order LC resonators to form a $6^{th}$ order resonator with three resonant frequencies. The oscillator uses the varactors for band switching and frequency tuning. The core current and power consumption of the high (middle, low)- band core oscillator are 3.59(3.42, 3.4) mA and 2.4(2.29, 2.28) mW, respectively at the dc drain-source bias of 0.67V. The oscillator can generate differential signals in the frequency range of 8.04-8.68 GHz, 5.82-6.15 GHz, and 3.68-4.08 GHz. The die area of the triple-band oscillator is $0.835{\times}1.103mm^2$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.504-510
• /
• 2016

In general, a fault locator is installed in Sub-Station of AT(Auto-transformer) feeding system to estimate the fault location and to protect the Korean AT feeding system. Since the line impedance characteristic is different to normal 3-phase transmission line, we need particular modification factors, which can be calculated using fault location recording data, to estimate the accurate fault location. Up to recently, forcible ground test has been used to calculate the modification factors of the fault locator. However, large amount of current is occurred when the forcible ground test is performed, and this current affects to adjacent equipments. Therefore, we proposed a novel calculation method of modification factors, arbitrary trip test, using boosting current of the operating electric train. Through several field test, we confirmed that modification factors for fault locator can be easily calculated by using proposed method. Moreover, we verified the accuracy and stability of the proposed calculation method.

• Korean Journal of Plant Resources
• /
• v.20 no.6
• /
• pp.504-510
• /
• 2007

GE interaction is the expression of differential genotypic adaptation across environments. GE interactions through different stability parameters and performance of the traits of genotypes were studied. The traits were days to maturity, pod length, number of pods/ plant, 100-seed weight and seed yield/plant in ten soybean genotypes across five environments. Significant differences were observed for genotypes, environments and GE interactions. Stability analysis after Eberhart and Russell's model suggested that the genotypes used in this study were all more or less responsive to environmental changes. Most of the genotypes perform better in Env.3. Based on phenotypic indices(Pi), regression ($S^2di$) genotype Garurab was found fairly stable for days to maturity. BS-23 and G-2120 may be considered as stable genotype for pod length. All the genotypes except G-2120 showed that the genotypes were relatively unstable under environmental fluctuation for the number of pod/plant. Genotype BS-23 was found most stable among all the genotypes for 100-seed weight. BS-3 and Gaurab was the most stable and desirable genotypes for seed yield in soybean.

• Journal of Periodontal and Implant Science
• /
• v.38 no.3
• /
• pp.503-510
• /
• 2008

Purpose: To evaluate bone formation on the implant surface between machined fixture and RBM surface fixture through analyzing of distribution and concentration of Ca and P by EPMA. Material and Methods: Fixtures had divided in 2 group: Machined(Group I), RBM (Group II). Total 4 fixtures were implanted on rabbit which sacrificed on 2 week and 4 week for the histological specimens. By these specimens EPMA value were measured, compared and analysed by each group to figure out the evidence of clinical use of RBM implant. Result: After 2 weeks and 4 weeks, it was analyzed that bone formation area, distribution and concentration of Ca and P by EPMA. In distribution and concentration of P Group II was higher than Group I, but there were no statistical significances. In new bone formation area, Group II was more higher than Group I with statistically significances. Both of group, after 4 weeks area is little bit higher than after 2 weeks area but there is no statistically significances. Conclusion: RBM implant was better than machined implant on the early bone formation.

• Research in Community and Public Health Nursing
• /
• v.20 no.2
• /
• pp.234-242
• /
• 2009

Purpose: The aim of this study was to investigate the impact of accidental events, depression, and anxiety among workers with industrial accidents in South Korea. Methods: The participants were 510 workers with industrial accidents. Data were collected by personal interviews with structured questionnaires for three months from August to October in 2005. For analyses, frequencies and means were utilized. Results: The participants' average age was 44.9 years, and about 91%of them were male. Also, they had a greater risk of poverty after being injured. The most frequent cause of accidents was fall (32.2%), and the most frequent injured body area was extremities (73.9%). For around a half of the participants, the treatment period was 12 months or shorter. The participants were at great risk of experiencing a negative impact due to events, depression, and anxiety. Conclusion: It is necessary to develop: (a) strategies for injured workers to be financially stable during recuperation; and (b) supporting systems for them not to suffer and exacerbate mental health problems after being injured.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.509-510
• /
• 2007

The Breakdown properties of epoxy composites are used for transformers and sensor, which has been studied. As a result, From the measurements of breakdown voltage, the more hardener is increased the stronger breakdown strength at low temperature because the ester of hardener is increased. Breakdown strength at the high temperature is decreased because the temperature at $110^{\circ}C$ is near at $T_g$. When the filler is added, between epoxy and silica is formed interface. Therefore the charge is accumulated in it, and the electric field is concentrated, and breakdown strength is decreased than non-filled specimens. In the case of specimens, the treated with silane, the breakdown strength becomes much higher since this is suggested that silane coupling agent has been improved chemical bonding in the interfaces and has been relaxed the electric filed concentration.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.2
• /
• pp.508-510
• /
• 2005

The crude extract of Quintinia acutifolia Kirk inhibited the growth of the Gram positive bacterium Bacillus subtilis ATCC 19659, (3 mm inhibition zone at $150\;{\mu}g/disc$) and the dermatophytic fungus Trichophyton mentagrophytes ATCC 28185, (3 mm inhibition zone at $150\;{\mu}g/disc$), and cytotoxic to P388 murine leukaemia cells ATCC CCL 46 P388D1, ($IC_{50}$ $50,000\;{\mu}g/mL$ at $150\;{\mu}g/disc$). However, Candida albicans (ATCC 14053) did not observed the antimicrobial activity and the cytotoxic activity to BSC monkey kidney cells ($({\alpha})$ 5 mg/mL, $150\;{\mu}g/disc$).

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.51-56
• /
• 2019

LuAG:Ce(Lu₃Al₅O₁₂:Ce³⁺) nano phosphor were synthesized by applying the coprecipitation method. It is used to increase the color rendering of phosphor ceramic plate for high power LEDs and laser lighting. Internal quantum efficiency and absorption of LuAG:Ce nano phosphor are 51.5 % and 64.4 %, respectively, which is higher than the previously studied nano phosphors. The maximum absorption wavelength of this phosphor is 450 nm blue light, and the emission wavelength is 510 nm. The emission wavelength shifted to longer wavelength when the concentration of Ce increased in the heat treatment of the reducing atmosphere. Thermal quenching of LuAG nano phosphor was 70 % at 200 ℃, it was explained by their significant quenching of all raman scattering modes, implying the restriction of electron-phonon couplings caused by their defects.