• Journal of Environmental Science International
• /
• v.24 no.7
• /
• pp.947-954
• /
• 2015

Dielectric barrier discharge plasma is a new technique in water pollutant degradation, which that is characterized by the production of chemically active species such as hydroxyl radicals, ozone, hydrogen peroxide, etc. If dissolving of plasma gas generated in the plasma reaction has increased, it is possible to increase the contaminant removal capacity. In this study, the improvement on the dissolving performance of plasma gas was evaluated by the indirect method measuring the overall oxygen transfer coefficient. Experiments were conducted to examine the effects of nozzle type, distance from water surface, air supply rate and liquid circulation rate. The experimental results showed that the $K_{La}$ value of the 3-prong nozzle is 2.67 times higher than the diffuser. The order of $K_{La}$ value with nozzle type ranked in the following order: 3-prong nozzle (inner diameter, less 1 mm) > circular nozzle (inner diameter, 1.5 mm) > ellipse nozzle (short diameter 1 mm, long diameter 2.5 mm) > circular nozzle (inner diameter, 3 mm). Optimal liquid circulation rate was appeared to be 1.7 L/min, the value of $K_{La}$ was 0.510 1/min. The value of $K_{La}$ with increasing air supply rate was revealed in the form of an exponential such as $K_{La}=0.3581e^{0.2919^*air\;flow\;rate}$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.1
• /
• pp.35-38
• /
• 2003

Nuclear 18S ribosomal RNA gene (185 rDNA) from the aquaculturable seaweed Porphya tenera (Bangiales, Rhodophyta) was amplified using the polymerase chain reaction and its sequence was analysed. Complete 185 rDNA has an 1,822 bp exon and a 510 bp intron. The G+C contents of exon and intron were $48.68\%\;and\;54,90\%,$ respectively. The exon sequence showed $99.6\%$ homology to the GebBank accession number AB029880 of the Japanese P. tenera. The intron region that is inserted upstream between 568 and 1,079 showed $43.6\%$ homology to the AB029880.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.507-510
• /
• 2003

This paper presents a novel prototype of tile three-phase bridge power block module type a auxiliary resonant AC link snubber circuit, which is effectively used for the three-phase voltage source type sinewave soft switching PWM inverter using IGBTs. Its operating principle Is described for current source load model, along with its practical design approach based on the simulation data. The performance evaluation of the three-phase voltage source type snewave soft switching PWM inverter incorporating a single three-phase bridge mo여le of active auxiliary resonant AC link snubber treated here Is illustrated, which is concerned with power duality efficiency power loss analysis. This inverter is discussed as compared with those of tile three-phase voltage source type sinewave hard switching PWM inverter. The power loss analysis of this soft switching PWM Inverter using IGBT power modules is evaluated on the basis of the measured v-i characteristics and switching power losses of IGBT, and antiparaliel diodes. The practical effectiveness of this inverter is proven by the power loss analysis for distributed power supply.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.4
• /
• pp.503-510
• /
• 1998

Effects of cadmium exposure on renal $Na^+$ and $K^+$ transports were studied in rats. During the course of cadmium treatment (2 mg Cd/kg/day, s.c. injections for 3 weeks) renal tubular transports of $Na^+$ and $K^+$ were evaluated by lithium clearance technique. During the early phase (first week) of cadmium treatment, urinary $Na^+$ excretion decreased drastically and this was due to an increased $Na^+$ reabsorption both in the proximal and distal nephrons. During the late phase (third week) of cadmium treatment, filtered $Na^+$ load was decreased by reduction in GFR, but the renal $Na^+$ excretion returned to the control level due to impaired $Na^+$ transport in the proximal tubule. Urinary excretion of $K^+$ did not change during the early phase, but it rose markedly during the late phase of cadmium treatment. These results indicate that a light cadmium intoxication induces a $Na^+$ retention, and a heavy intoxication results in a $K^+$ loss. Possible mechanisms for these changes are discussed.

• Journal of Microbiology
• /
• v.43 no.6
• /
• pp.510-515
• /
• 2005

The growth of red pepper plants was enhanced by treatment with the rhizobacterium, Bacillus cereus MJ-1. Red pepper shoots showed a 1.38-fold increase in fresh weight (fw) and roots showed a 1.28-fold fw gain. This plant growth-promoting rhizobacterium (PGPR) has been reported to produce gibberellins (GAs). Other GAs-producing rhizobacteria, Bacillus macroides CJ-29 and Bacillus pumilus CJ-69, also enhanced the fw of the plants. They were less effective than B. cereus MJ-1, though. The endogenous GAs content of pepper shoots inoculated with MJ-1 was also higher than in shoots inoculated with CJ-29 or CJ-69. When inoculated with MJ-1, bacterial colonization rate of the roots was higher than that of roots inoculated with CJ-29 or CJ-69. These results support the idea that the plant growth-promoting effect of the bacteria also positively related with the efficiency of root colonization by the bacteria. In addition, we identified the major endogenous GAs of the red pepper as originating from both the early C-13 hydroxylation and the early non C-13 hydroxylation pathways, with the latter being the predominant pathway of GA biosynthesis in red pepper shoots.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.5
• /
• pp.499-510
• /
• 2015

The purpose of this research is to identify new service opportunities for enhancing driving safety of intra-city buses based on driving behavior analysis. Service opportunity identification involves finding target customers of service (to whom), motivations for service (why), service contents (what), and service delivery process (when, where). This paper presents an analysis of driving behaviors using the operational data of intra-city buses in conjunction with traffic accident data and drivers' driving history data. This paper also presents four identified service opportunities based on the data analysis results. This research would contribute to enhancing driving safety of intra-city buses in Korea and serve as a basis for developing new services for driving safety enhancement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.509-510
• /
• 2006

전류 및 전압을 측정하는 것은 오래전부터 CT(current transformer)/PT(potential transformer) 가 많이 사용되어져 왔지만, 이들은 iron core를 사용하기 때문에 포화특성이 발생하게 되어, 오차를 유발하게 된다. 이에 대한 대처 방안으로서 현재는 로고스키코일 및 분압방식을 이용한 ECT/EVT에 대한 적용이 진행이 되고 있다. ECT/EVT는 포화특성이 없고, 선형성이 매우우수하며, 소형, 경량이라는 점에서 현재 배전반의 변화 추세를 구현할 수 있는 충분한 능력을 지니고 있다. 이에 본 논문에서는 ECT/EVT를 제작하여, 특성을 분석하고자 한다. 특이점은 ECT/EVT가 EPOXY SPACER에 내장이 되어 사용이 되며, 이런 사용조건하에서의 이들의 특성이 변화 될 수 있는지를 살펴보았다. 그 결과 EPXOY 몰딩하에서도 그 선형성을 잃지 않았으며, 원하는 오차인 ${\pm}1%$에 부합되는 결과를 나타내었다.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.506-510
• /
• 2006

To be used as a source of astaxanthin by animals, the red yeast Xanthophyllomyces dendrorhous needs to be dried and the cell wall ruptured. Spray-drying and flat-roller milling successfully prepared the yeast as a feed additive with little loss of astaxanthin. Spray-drying successfully dried the yeast with negligible decomposition of astaxanthin compared to drum-drying. By repeated milling with a flat-roller mill, astaxanthin extracted with ethanol increased from 0.01 to 1.31 mg astaxanthin/g yeast. This method did not decompose astaxanthin in contrast to chemical digestion of the cell wall. Flat-roller milling effectively flattened and cracked the dried cells. Astaxanthin in yeast prepared by spray-drying and flat-roller milling was well absorbed by animals. Specifically, when spray-dried and milled yeast was supplied in the feed (40 mg astaxanthin/kg feed), astaxanthin was successfully absorbed (1,500 ng/mL blood and 1,100 ng/g skin) by laying hens.

• Journal of Environmental Science International
• /
• v.12 no.4
• /
• pp.503-510
• /
• 2003

How to plan the energy system is one of the keys f3r constructing the Environment -Friendly City. for this reason, a great number of surveys for utilizing unused energy have conducted by a planner. In regard to unused energy, the heat from incineration plants classify as a unused energy having high-exergy-energy. From this point of view, It is studied about the plant systems providing heat to district heating & cooling(D.H.C) and producing electric power. It is divided four system models as system I (10K [kgf/cm$^2$) vapor as outlet of boiler, supply far 10K vapor and return to 60$^{\circ}C$ as supply condition of district heating), system II (30 K vapor as outlet of boiler, supply for 5t vapor and return to 60f as supply condition of district heating), system 111 (30 K vapor as outlet of boiler, supply for 85$^{\circ}C$ hot water and return to 60$^{\circ}C$ as supply condition of district heating), system IV (30 K vapor as outlet of boiler, supply for 47$^{\circ}C$ hot water and return to 40t as supply condition of district heating). The results from the upper condition of four system, System II got a proper on economical benefits and system IV calculated as benefiting on energy saving effects, and suggest indifference curve as the total evaluation method of both economical benefits and energy saving.

• Journal of Mechanical Science and Technology
• /
• v.17 no.4
• /
• pp.501-510
• /
• 2003

The spot welded sections of automobiles such as the hat and double hat section members, absorb the most of the energy during the front-end collision. The purpose of this study was to analyze the collapse characteristics of spot welded section members with respect ttl the pitch or spot welds on flanges. through impact experiments and computation for para-closed sections and perfectly closed sections. The hat shaped section members were tested at the impact collapse velocities of 4.72 m/sec, 6.54 m/sec and 7.19 m/sec and double hat shaped section members were tested at the impact collapse velocities of 6.54 m/sec, 7.19 m/sec and 7.27 m/sec. A commercial LS-DYNA3D was used to simulate the collapse behavior of the hat and double hat shaped section members. The validity of the simulation was to be proved by comparing the simulation results and the experimental results.