• Korean Journal of Materials Research
• /
• v.18 no.9
• /
• pp.507-510
• /
• 2008

Electrical properties of multi-channel metal-induced unilaterally precrystallized polycrystalline silicon thin-film transistor (MIUP poly-Si TFT) devices and circuits were investigated. Although their structure was integrated into small area, reducing annealing process time for fuller crystallization than that of conventional crystal filtered MIUP poly-Si TFTs, the multi-channel MIUP poly-Si TFTs showed the effect of crystal filtering. The multi-channel MIUP poly-Si TFTs showed a higher carrier mobility of more than 1.5 times that of the conventional MIUP poly-Si TFTs. Moreover, PMOS inverters consisting of the multi-channel MIUP poly-Si TFTs showed high dynamic performance compared with inverters consisting of the conventional MIUP poly-Si TFTs.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.509-510
• /
• 2008

본 논문은 $0.18{\mu}m$ CMOS 공정을 사용하여 2.5Gb/s CMOS CDR을 설계하였다. CML type의 논리게이트를 이용하여 보다 높은 주파수의 대역의 데이터를 복원하기 위한 위상비교기(PD)와 PD의 up과 down신호를 지연없이 루프필터(LF)에 공급하기 위한 전하점프(CP) 그리고 외부 스위치를 통해 VCO이득을 조절할 수 있는 링 타입의 VCO로 구성되었다. 또한 VCO의 부담을 줄이기 위하여 half-rate 클럭 테크닉을 사용하였다. Cadence tool을 사용하여 모의실험 및 layout을 하였다. VCO이득은 100MHz/V이고, 클릭 jitter는 rising일 때 27ps, falling일 때 32ps로 우수한 결과를 얻을 수 있었다. 테스트칩 제작은 매그나침 $0.18{\um}$ CMOS 공정을 이용하였다. 칩 사이즈는 PAD를 포함하여 $850um{\times}750um$이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.510-513
• /
• 2005

Due to the asymptotic property, deadbeat control can hardly be applied to the continuous time system control. But some delay element method can deal such a problem. Besides delay element method, well-known digital deadbeat control can be used by the aid of some smoothing elements. In this paper, 2nd order smoothing element is used for the smoothing of the digital deadbeat controller. And this element is argumented to the plant, and so control problem is to control the argumented system digitally. We simulated this control system using Matlab language and finally apply this algorithm to the rotary inverted pendulum system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.336-341
• /
• 2010

The burning interruption between the initiator and the delay column in a Zr-Ni K1 delay system used for a K510 fuze occurs with long-time storage. About 10 % failure probability of 15-years stored delay systems shows the failure mode in open literature. This paper shows storage lifetime improvement results for the delay system through changing the single-base delay column into double-base ones and controlling the manufacturing processes especially the initial inclusion of humidity. The double-base delay columns was implemented by inserting one delay column of fast burning rates between the initiator and the previous delay column of slow burning rates. Accelerated aging tests of the delay systems with double-base columns, and then the firing tests were performed to evaluate the improved lifetime. The double-base delay columns shows improved storage lifetime of the delay system through preventing the failure mode.

• The Plant Pathology Journal
• /
• v.29 no.1
• /
• pp.87-92
• /
• 2013

This study was conducted to determine the Phytophthora rot resistance of 514 accessions of watermelon germplasm, Citrullus lanatus var lanatus. About 46% of the 514 accessions tested were collections from Uzbekistan, Turkey, China, U.S.A., and Ukraine. Phytophthora capsici was inoculated to 45-day-old watermelon seedlings by drenching with 5 ml of sporangial suspension ($10^6$ sporangia/ml). At 7 days after inoculation, 21 accessions showed no disease symptoms while 291 accessions of susceptible watermelon germplasm showed more than 60.1% disease severity. A total of 510 accessions of watermelon germplasm showed significant disease symptoms and were rated as susceptible to highly susceptible 35 days after inoculation. The highly susceptible watermelon germplasm exhibited white fungal hyphae on the lesion or damping off with water-soaked and browning symptoms. One accession (IT032840) showed moderate resistance and two accessions (IT185446 and IT187904) were resistant to P. capsici. Results suggest that these two resistant germplasm can be used as a rootstock and as a source of resistance in breeding resistant watermelon varieties against Phytophthora.

• Journal of Biomedical Engineering Research
• /
• v.41 no.1
• /
• pp.14-21
• /
• 2020

Recently, porous additive manufactured(AM) cages have been introduced to provide more desirable stiffness and may be beneficial to bone ingrowth. They are designed to attempt to reduce the subsidence problem of traditional titanium cage and to get osseointegrative property that PEEK doesn't have. This study was performed to evaluate the mechanical performance of newly developed lumbar porous AM cages. Three types of mechanical tests were performed in accordance with the ASTM standards: Static compression, compression-shear, and subsidence tests. The porous AM cages with 60% porosity showed similar device stiffness and strength as the various products submitted to FDA 510(k), and their wider contact area improved the subsidence test results by about 50%. In conclusion, the porous AM cages developed in this study were considered mechanically safe and could be an alternative to solid PEEK cages.

• Journal of The Korean Association of Information Education
• /
• v.19 no.3
• /
• pp.299-310
• /
• 2015

This study was conducted with the goal to identify the degree to which elementary school students' knowledge about personal information protection practices impacted their actual behavior with regard to privacy protection. To fulfill this goal, knowledge about personal information protection was set as (1) knowledge about concepts of personal information, (2) knowledge of the rights of information holders, (3) knowledge about the code of conduct for information protection, and (4) awareness of the value of personal information. As for students' behaviors to ensure their personal information protection those were set as their habits to comply with the personal in-formation protection code of conduct and their efforts to respond and recover from any personal information violation. This study was conducted targeting 510 elementary students. The degree of the students' knowledge and their behaviors was measured by first distributing a self-report survey to the students and then analyzing their responses. The results of the analysis revealed the following: First, it was found that there are no differences among the four factors of knowledge and behavior according to the status of their education. Second, the two factors that primarily affected their personal information protection behavior were found to be their awareness of the information protection code of conduct and awareness of the value of personal information. This study holds significance in that it makes suggestions as to how personal protection practices should be taught to public school students.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.791-798
• /
• 1994

Ohmic heating is a food processing operation in which heat is internally generated within foods by the passage of alternating electric current. The process enables highly viscous paste foods such as Kochujang, and fermented soybean paste to be heated very fast. In order to develope the novel pasteurization process of paste foods, static Ohmic heating system was built, and heating characteristic during Ohmic heating under various conditions were studied. Electric conductivities of Kochujang and fermented soybean paste at room temperature were 1.865 S/m and 2.510 S/m, respectively and increased linearly with increasing temperature. Specific heating rate was highly dependent on the frequency. The highest heating rate was achieved at 5 KHz for Kochujang and 20 KHz for fermented soybean paste. Uniform heating throughout the sample was achieved during Ohmic heating with low frequency electrical currents, however above 5 KHz frequency, surface temperature was several degrees higher than the bulk.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.510-518
• /
• 2020

With the promotion of digitalization in the construction industry, BIM has become an indispensable technology. On the other hand, it has not been actively utilized in practice because of the difficulty of BIM modeling. The reason is that 3D modeling is less productive not only because of the difficulty of learning BIM software but also the modeling work is done manually. Therefore, this study proposes a method and system that can improve the productivity of BIM-based modeling. For this reason, in the study, a slit caisson, which is a typical structure of a port, was selected as a development target, and various parameters were derived through interviews with experts so that it could be used in practice. This study presents a UI construction plan that considers user convenience for efficient management and operation of diverse and complex parameters. Based on this, this study used visual programming and Excel VBA to develop a BIM-based design automation system for slit caissons. The developed system can use many parameters to quickly develop slit caisson models suitable for various design conditions that can contribute to BIM-based modeling and productivity improvement.

• Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.240-245
• /
• 1999

The starches were isolated from normal (Mudeung) and waxy (Chalssal) hull-less barleys which contained similar contents of ${\beta}-glucan$ and amylose. Their water binding capacity, swelling power and solubility were analyzed. Scanning electron microscopy showed most starch granules had predominant lense shape granules. The particle size of starch granules was in the range of $0.1{\sim}30\;{\mu}m$. The higher pasting temperature was found for $Mudeung(84^{\circ}C)$ than for $Chalssal(61.5^{\circ}C)$. However, Mudeung barley had a lower peak viscosity(535 BU) than that of Chalssal(1,510 BU). Differential scanning calorymetry analysis showed that To and Tp for two starches were 57.0, $60.6^{\circ}C$ for Mudeung, and were 57.0 and $62.2^{\circ}C$ for Chalssal, respectively. Enthalpy changes were 7.9 and 13.2 J/g for Mudeung and Chalssal, respectively.