• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.50-50
• /
• 2007

We report the effect of the film thickness on electrical properties of Ti(N) film resistors. The applications of titanium nitride thin film resistor in $\Pi$-type attenuators are also characterized. As film thickness decreases from 100 to 30 nm, temperature coefficient of resistance significantly decreases from -60 to -148 ppm/K, while sheet resistance increases from 37 to $270\;{\Omega}/{\square}$. The characterizations of 20dB-attenuators using thin film resistors are improved in comparison with those using thick film resistors. The $\Pi$-type attenuators using Ti(N) thin film resistors exhibit a attenuation of -19.94 dB and voltage standing wave ratio of 1.16 at a frequency of 2.7 GHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.559-560
• /
• 2006

Inkjet Printing is very attractive method for direct patterns with no masks, In order to Achieve direct printing with nano metal, It is often necessary to print them with highly concentrated Ink We research the High Concentrated silver nano ink. Formulation which has a good thermal stability and storage stability and jet stability using a ethylene glycol ether. Normally Alcohol-based inks can be sensitive But High boiling point ethylene glycol ether base Ink is creating a stable meniscus and minimum maintenance issues. We are reaching a 50~60wt% high Silver Ink using a Hydrophilic Ag Nano powder. (30~50nm)

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2003년도 춘계학술발표논문집
• /
• pp.113-115
• /
• 2003

우리가 타자기로 글을 쓸 때는 먹지리본을 햄머가 가격하여 종이 위에 글씨 청태의 먹이 묻는 원리로 진행된다. 이러한 원리를 미세 패터닝에 응용하여, 해머 역할을 하는 Nd-YAG 레이저로 유리기판/100nm Cr(먹지)// 실리콘기판 (종이) 구조의 적충물에 조사시켜 Cr이 실리콘기판 위에 전사됨으로써 미세 패터닝이 가능한지 확인하였다. 제안된 미세 패터닝은 TeraBit/in²급 고밀도 정보저장 또는 반도체 공정의 생산성 향상을 위해 응용이 가능하다. 선폭 50 ㎛급 레이저를 주사속도 200과 1500 ㎜/s, Q스위치 조건을 10,000～50,000 ㎐로 변화시키며 마킹을 실시한 결과 Cr의 전사는 진행되지 않았으나, 최종적으로 입사 선폭의 33％ 이하로 마킹이 가능하여 비싼 광학계를 가진 레이저를 대치하여 보다 정말한 마킹이 가능함을 확인하였다.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.401-405
• /
• 1999

Reflective silver films with high quality were prepared on polyester substrate by using sputter deposit on techniques. Best reflectivity thin films of silver were produced with process parameters of $10^{-6}$ Torr as base pressure, 50 W as R.F. power, 5 mTorr as working pressure, and 10 sccm as Ar flow rate. Being deposited with an R.F. power of 50 W, Ag films revealed the highest 96.3 % reflectance as illuminated with a light of 700 nm wavelength. The adhesion of sample films showed as high as 14 to $20{\;}kg/\textrm{cm}^2$, which is suitable for industrial purposes. Their film crystallinity and orientation resulted in the planes of (111) and (200) for the growth with a preferred orientation of <111>, in general. The cross-sections of thin film specimens showed columnar structures. It is noted that columns became coarsened and less dense as R.F. power increased, resulting in a low reflectivity for the product film.

• 한국식품영양과학회지
• /
• 제20권5호
• /
• pp.483-487
• /
• 1991

The utilization of ozone as a disinfectant for removing poultry meat microorganisms and then cleaning the poultry rinse water was investigated. When microbial suspensions were treated with ozone at 2, 500ppm/min for 40min, microorganisms were not detectable perfectly. The bacteriocidal effect of ozone by temperature was enhanced greater at 7$^{\circ}C$ than $25^{\circ}C$. All poultry meat microorganisms were killed by ozone treatment at 1, 530ppm for 50min. The pathogenic bacteria such as Salmonella sp. were more vulnerable and not detected by ozone treatment for 20min. Ozonation of the suspension for 20min and 50min increased light transmission at 500nm to 58% and 145%, respectively. The order of COD removal was ozone treatment(21%), coagulant((Al)2SO4) treatment(41%), ozone treatment after coagulant treatment(54%).

• 한국식물병리학회지
• /
• 제14권3호
• /
• pp.191-202
• /
• 1998

About 300 actinomycetes were isolated from two forest and one sea-shore soil and tested for inhibitory effects on mycelial growth of six plant pathogenic fungi Magnaporthe grisea, Alternaria mali, Colletotrichum gloeosporioides, Phytophthora capsici, Fusarium oxysporum f. sp. cucumerinum, and Rhizoctonia solani. Among 300 actinomycetes tested, only 16 actinomycetes showed the antifungal activity against the test fungi. Isolate NH 50 was selected for production and purification of antifungal antibiotic substances. Actinomycete isolate NH 50 displayed the broad antifungal spectra against 11 plant pathogenic fungi. To identify actinomycete isolate NH 50, cultural characteristics on various agar media, diaminopimelic acid type, and morphological characteristics by scanning electron microscopy were examined. As a result, actinomycete isolate NH 50 was classified as a rare actinomycete that had LL-DAP type and did not produce spores. After incubation of isolate NH 50 in yeast extract-malt extract-dextrose broth, antifungal compound NH-B1 that inhibited mycelial growth of some plant pathogenic fungi was purified from the methanol eluates of XAD-16 resins by a series of purification procedures, i.e., silica gel flash chromatography, C18 flash chromatography, Sephadex LH-20 column chromatography, silica gel medium pressure liquid chromatography (MPLC), C18 MPLC, and high pressure liquid chromatography (HPLC). UV spectrum and 1HNMR spectrum of antifungal compound NH-B1 dissolved in methanol were examined. The antibiotic NH-B1 showed the major peaks at 230 and 271.2nm. Based on the data of 1H-NMR spectrum, NH-B1 was confirmed to be an extremely complex polymer of sugars called polysaccharides. The antibiotic NH-B1 showed strong antifungal activity against Alternaria solani and Cercospora kikuchi, but weak activity against M. grisea.

• 공업화학
• /
• 제16권5호
• /
• pp.648-652
• /
• 2005

대기압하에서 소결이 어렵다고 알려진 초이온 전도체인 $K^+$-beta-aluminas를 attrition mill을 이용하여 약 350 nm의 평균 입도를 가지는 분말로 분쇄한 후, 시편을 일축가압 성형하여 상압 하에서 동일조성의 분위기 분말을 이용하여 소결하였다. 소결온도는 $1400^{\circ}C{\sim}1650^{\circ}C$까지 $50^{\circ}C$ 간격으로 소결하였으며, 각 소결온도에서 시간에 따른 소결특성을 살펴보았다. 또한 고온에서 입자 성장 속도를 조절하기 위하여 $1600^{\circ}C$에서 zone sintering을 실시하였다. $1600^{\circ}C$와 $1650^{\circ}C$에서 소결한 경우와 $1600^{\circ}C$에서 zone sintering한 시편의 경우, 각각 약 93%와 95%의 소결 밀도를 나타내었다. $1600^{\circ}C$ 이상의 온도에서 2 h 이상 장시간 소결할 경우, 입자의 거대성장으로 인하여 소결밀도가 90% 미만으로 감소하였다.

• 한국자기학회지
• /
• 제19권5호
• /
• pp.176-179
• /
• 2009

Sputtering 방법으로 유리기판위에 50-nm Fe 박막을 증착하여 박하우젠 현상을 연구하였다. 실험실 자체 제작 장비인 광자기 현미경을 사용하여 박하우젠 점프가 일어나는 동안 자구 이미지를 촬영함으로써 박하우젠 현상을 실시간으로 직접 관찰하였다. 자구 이미지들을 관찰한 결과 박하우젠 점프가 같은 실험조건에서 측정되었음에도 불구하고 매우 무작위적인 모습을 보이는 것을 확인하였다. 1000번 이상의 측정을 통해 박하우젠 점프크기의 통계분포를 구하였는데, 점프크기의 분포가 거듭제곱법칙 분포를 보임을 확인하였고, 임계지수는 1.14 $\pm$ 0.03의 값을 보임을 확인하였다.

• 한국표면공학회지
• /
• 제48권2호
• /
• pp.50-55
• /
• 2015

$Al_2O_3$ thin films were deposited on the moth eye anti-reflective nanostructured polycarbonate films by atomic layer deposition (ALD) techniques. Without ALD-$Al_2O_3$ thin films, moth eye anti-reflective nanostructured films had a high optical transmittance of 95.47% at a wavelength of 550 nm and a very poor hardness of 0.1381 GPa. With increasing the thickness of $Al_2O_3$ thin films from 5 to 25 nm, the transmittance of moth eye anti-reflective nanostructured films was gradually decreased from 94.94 to 93.12%. On the other hand, the hardness of the films was greatly increased from 0.3498 to 0.7806 GPa with increasing the thickness of $Al_2O_3$ thin films. This result shows that ALD thin films can be applied to improve mechanical properties with an adequate optical transmittance of the conventional moth eye anti-reflection nanostructure films.

• Korean Chemical Engineering Research
• /
• 제50권5호
• /
• pp.808-814
• /
• 2012

수열합성법을 이용하여 zinc acetate와 암모니아수를 $80^{\circ}C$의 고온에서 침전 반응시켜 광촉매용 산화아연 입자를 제조하였다. 암모니아수의 pH, 전구체인 zinc acetate의 농도 변화가 산화아연 입자의 특성에 미치는 영향을 조사하였다. 암모니아수 pH 11, zinc acetate의 농도 1.0M, 침전반응온도 $80^{\circ}C$의 조건에서 제조된 산화아연이 평균 입경 $3{\mu}m$로 가장 작았으며, SEM과 XRD 분석을 통하여 육방정계의 봉상 막대형, Anatase 형태의 산화아연이 제조됨을 확인할 수 있었다. DRS와 PL 분석을 통하여 제조된 산화아연이 200~400 nm의 자외선 영역에서 활성을 나타냄을 확인하였고, 자외선 조사 하에서 광분해 실험을 수행한 결과 산화아연은 3시간 동안 식용색소인 Brilliant blue FCF를 57%까지 분해할 수 있었다.