• Journal of Life Science
• /
• v.14 no.4
• /
• pp.620-626
• /
• 2004

Viruses causing acute conjuntivitis were isolated from 675 patients carrying eye infections for year 2001 to 2003 in Busan reagion and their antigenic properties characterized by a serological survey. In 2001, adenoviruses (serotype 8) were found in 5 of 48 cases. In 2002, the isolated viruses were 7 adenoviruses (serotype 8 and 37), 8 coxsakieviruses (serotype A24 and B3) and 1 echoviruses (serotype 6) from 324 specimens that are known as the causative agents of acute hemorrhagic conjuctivitis (AHC). In 2003, 25 case of 303 specimens were 7 adenoviruses (serotype 3, 4, 8 and 37), 7 echoviruses (serotype 6 and 7) and 4 untypable enteroviruses. Although coxsakievirus (serotype B3) and echoviruses (serotype 6 and 7) were generally known as causative agent of aseptic meningitis, it hasn't been reported until now that they were isolated from the conjunctival swabs. The out break of AC was observed from April to October in Busan. These isolated viruses showed a strong cytophatic effects on HEp-2, RD, Vero and BGM cell strains. Analysis of electron micrograph of those viruses showed that adenovirus consists of a 80 nm diameter and nonenvloped icosahedron and then echovirus and coxsackievirus were small nonenveloped and isometric-shaped viruses. Adenovirus showing a cytophatic effect was resulted in a 458 bp single band by PCR and echovirus, coxsackievirus and untypable enterovirus were detected a 437 bp products by RT-PCR.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.6
• /
• pp.373-380
• /
• 2008

In order to develop optimal formulation and iontophoresis condition for the transdermal delivery of levodopa, we have evaluated the effect of two permeation enhancers, ethanol and oleic acid in microemulsion, on transdermal delivery of levodopa. In vitro flux studies were performed at $33^{\circ}C$, using side-by-side diffusion cell and full thickness hairless mouse skin. Current density applied was $0.4\;mA/cm^2$ and current was off after 6 hours application. Levodopa was analysed by HPLC at 280 nm. The o/w microemulsions of oleic acid in buffer solution (pH 2.5 & 4.5) were prepared using oleic acid, Tween 80 and ethanol. The existence of microemulsion regions were investigated in pseudo-ternary phase diagrams. Contrary to our expectation, cumulative amount of levodopa transported from microemulsion (pH 2.5) for 10 hours was similar to that from aqueous solution in all delivery methods (passive, anodal and cathodal). When pH of the micro-emulsion was pH 4.5, cumulative amount of levodopa transported for 10 hours increased about 40% (anodal) to 50% (cathodal), when compared to that from aqueous solution. Flux from pH 4.5 microemulsion showed higher value than that from pH 2.5 in all delivery methods. These results seem to indicate that electroosmosis plays more dominant role than electrorepulsion in the flux of levodopa at pH 2.5. The effect of ethanol on iontophoretic flux was studied using pH 2.5 phosphate buffer solution containing 3% or 5% (v/v) ethanol. Flux enhancement was observed in passive and anodal delivery as the concentration of the ethanol increased. Without ethanol, cathodal delivery showed higher flux than anodal delivery. Anodal delivery increased the cumulative amount of levodopa transported 1.6 fold by 5% ethanol after 10 hours. However, in cathodal delivery, no flux enhancement of levodopa was observed during current application and only marginal increase in cumulative amount transported after 10 hours was observed by 5% ethanol. These results seem to be related to the decrease in dielectric constant of the medium and the lipid extraction of the ethanol, which decrease the electroosmotic flow, and thus decrease the flux. Overall, the results provide important insights into the role of electroosmosis and electrorepulsion in the transport of levodopa through skin, and provide some useful informations for optimal formulation for levodopa.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.180.1-180
• /
• 2003

양파건조분말 제조에 있어 품질고급화를 목적으로 건조방법을 달리하여 건조과정 중 양파의 이화학적 품질특성 변화를 조사하였다. 수분함량변화는 50'E 열풍건조의 경우 건조 5일에 수분함량 10% 이하로 건조가 되었으며 건조1일에 수분함량 5.30%로 분말화상태가 가능했다. 또한, 4$0^{\circ}C$ 진공건조의 경우는 건조기간 3일째에 수분함량이 6.05%로 거의 건조가 완료된 상태였으며 건조 5일째는 수분함량 5.23%를 나타내어 분말화하였다. -7$0^{\circ}C$ 동결건조의 경우 건조 7일째에 수분함량 5.10%를 유지하여 분말화가 가능하였다. 건조과정 중 양파의 중량감소율 변화는 5$0^{\circ}C$ 열풍건조의 경우 건조 3일째 중량 감소율이 89.6%로 매우 급격한 감소현상을 보였으며, 4$0^{\circ}C$ 진공건조의 경우는 건조 2일째 중량감소율이 84.4%까지 급격한 감소현상을 나타내었고, 또한, -7$0^{\circ}C$ 동결건조의 경우는 건조 최종일인 7일째 중량감소율은 94.9%를 나타내었다. 건조과정 중 갈색도변화는 5$0^{\circ}C$ 열풍건조와 4$0^{\circ}C$ 진공건조의 경우 건조 3일째까지 각각 흡광도(420nm)값을 2.119와 1.941로 급격한 증가현상을 나타낸 후 감소하는 경향을 나타내었고, -7$0^{\circ}C$ 동결건조의 경우는 건조 최종일인 7일째 흡광도가 1.173으로 가장 낮은 갈색도변화를 보였다. 건조과정 중 색도변화에 있어‘L’값의 변화는 5$0^{\circ}C$ 열풍건조의 경우가 양파의 내부와 외부면의 초기 L값이 77.40과 74.82에서 최종 L값이 63.72와 65.07로 4$0^{\circ}C$ 진공건조와 -7$0^{\circ}C$ 동결건조의 L값 변화보다 큰 변화를 보였고, 또한‘a’값과 ‘b’값의 경우도 마찬가지로 5$0^{\circ}C$ 열풍건조의 경우가 양파의 내부와 외부면의 적색도 및 황색도 변화가 크게 일어나는 경향을 나타내었다. 건조과정 중 vitamin C의 함량변화는 건조에 의한 수분함량의 감소로 vitamin C의 함량은 상대적으로 증가하였고, -7$0^{\circ}C$ 동결건조의 경우가 가장 높은 vitamin C의 증가량을 나타내었고, 그와 반대로 5$0^{\circ}C$ 열풍건조의 경우는 열에 의한 vitamin C의 변화로 인한 상대적 증가량은 감소하는 경향을 나타내었다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.11
• /
• pp.1682-1686
• /
• 2015

This study was conducted to establish an HPLC analysis method for determination of marker compounds as part of materials standardization for development of health functional food materials from pear pomace. The quantitative determination method of caffeic acid and chlorogenic acid as marker compounds of pear pomace extract (PPE) was optimized by HPLC analysis using a C18 column ($5{\times}250mm$, $5{\mu}m$) with a 0.2% elution gradient of acetic acid and methanol as the mobile phase at a flow rate of 0.8 mL/min and detection wavelength of 330 nm. The HPLC/UV method was applied successfully to the quantification of marker compounds in PPE after validation of the method with linearity, accuracy, and precision. The method showed high linearity of the calibration curve with a coefficient of correlation ($R^2$) of 0.9999, and limit of detection and limit of quantification were $1.14{\mu}g/mL$ (caffeic acid) and $1.61{\mu}g/mL$ (chlorogenic acid) as well as $4.9{\mu}g/mL$ (caffeic acid) and $4.9{\mu}g/mL$ (chlorogenic acid), respectively. Relative standard deviation values from intra- and inter-day precision were less than 3.1% (caffeic acid) and 4.0% (chlorogenic acid), respectively. Recovery rates of caffeic acid and chlorogenic acid at 12.5, 25, and $50{\mu}g/mL$ were 93.66~106.32% and 97.33~105.68%, respectively. An optimized method for extraction of caffeic acid and chlorogenic acid in PPE was established through diverse extraction conditions, and the validation indicated that the method is very useful for evaluation of marker compounds in PPE to develop a health functional food material.

• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.38-50
• /
• 1987

The purpose of this comparative study is to investigate the differences of growth behaviors (height, weight, yield capacities etc.) and germination characters (induced photo-dormancy) among the three different species of Arnaranthus sp. The results obtained are summarized as follows. The growth of the cultivar of A.hypochondriacus was more vigor than that of the wild plant of A.retroflexus during the whole life cycle. The fresh weight, dry weight, yield capacity of A.hypochondriacus were much more higher than those of the others two species (A.retroflexus and A.Cruenthus). There are very different germinability formation and induced dormancy patterns between the cultivar and wild plant during seed formation periods. The cultivar of A.hypochondriacus was not induced primary dormancy in the any seed formation stages but wild plant of A.retroflexus was induced deep true dormancy. We suggested that these differences occured by the sum of different absorption of solar energy spectrum by the different seed colors between the cultivar (white color seed) and wild (black seed). And we confirmed the different absorption spectrum of the three different Arnaranthus sp. seeds.

• Particle and aerosol research
• /
• v.14 no.2
• /
• pp.25-33
• /
• 2018

In this study, the concentration of fine indoor dust and the size distribution of fine indoor dust were analyzed by measuring the dust generated during the cleaning process of an indoor office. We measured $PM_{10}$, $PM_{2.5}$, and $PM_{1.0}$ and analyzed the size distributions of dust larger than $0.3{\mu}m$ in diameter during cleaning. The results showed that the concentration of $PM_{10}$ increased rapidly during cleaning, however $PM_{1.0}$ did not increase. Before cleaning with a broom, the fine dust concentration was about $50{\mu}g/m^3$, but increased to about $400{\mu}g/m^3$ as cleaning progressed. In the case of indoor cleaning with a vacuum cleaner, the concentration of $PM_{10}$ increased during the cleaning process and the increase of $PM_{2.5}$ was relatively small. $PM_{1.0}$ did not increase as in the case of cleaning the broom.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.2
• /
• pp.129-136
• /
• 2011

The moisturizing effect and stability of a cream containing 0.25 % Inula britannica flower ethyl acetate fraction were investigated. The pH, viscosity, and absorbance were measured under 4 different temperature conditions(4, 20, 37, and $45^{\circ}C$) and under the sun light at 2 week intervals for 12 weeks. The variations in pH and viscosity of all experimental creams were similar to those of control cream. The absorbance variations of the extract from experimental cream at 330 nm were in the order: under the sun > 45 > 37 > 25 > $4^{\circ}C$. It shows that ethyl acetate fraction in the cream can be oxidized under the sun. In addition, any change in color or smell was not observed through 12 weeks of the experimental period. These results showed that the cream were stable. Accordingly, it is suggested that further study is needed to provide more information to the manufacturers, who are seeking for the application of the extract to improve the anti-oxidant and antibacterial activities and stability of cosmetic products.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.415-422
• /
• 2011

This study evaluated the feasibility of using a portable near infrared reflectance spectrometer working in the 900~1,600 nm range for the measurement of quality-related parameters (moisture, pH, Acid detergent fiber (ADF), Neutral detergent fiber (NDF), Crude protein (CP), lactic acid) in intact silage. The calibration result for the Phazir (handheld, Polychromix) was compared with the result for the Spectrastar (Lab. based, Unity). A total of 67 Italian ryegrass silages were used to build calibration models using different spectral signal pre-treatments and the partial least squares regression (PLS) method. The good calibration statistics in two instruments was obtained for moisture content of Italian ryegrass silages with over $R^2$ = 0.95. The Phazir spectrometer was less accurate in measuring of ADF, NDF and CP contents. The Spectrastar instrument yielded greater precision for pH and lactic acid content; statistic values were over $R^2$ = 0.82 and the standard error of calibration (SEC) = 0.21% and 0.24%. Thus, the NIR measurement of forage quality in the field by portable NIR analyzers was shown not to be feasible, but additional investigations are required to discern the key instrumental and operational parameters that may influence the portable NIR measurement.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.100-109
• /
• 2002

Significant damage to concrete results from the intrusion of corrosive solutions, for example, dissolved chlorides corrode reinforcing steel and cause spatting. Effectively blocks the penetration of these solutions will eliminate or greatly reduce this damage and lead to increased durability. This study is to investigate the effects of pozzolanic admixtures, fly ash and silica fume, and a blast furnace slag on the chloride ion penetration of concretes. The main experimental variables wore the water-cementitious material ratios, the types and amount of admixtures, and the curing time. And it is tested for the porosity and pore size distributions of cement paste, chloride ion permeability based on electrical conductance, and 180-day ponding test for chloride intrusion. The results show that the resistance of concrete to the penetration of chloride ions increases as the w/c was decreased, and the increasing of curing time. Also, concrete with pozzolans exhibited higher resistance to chloride ion penetration than the plain concrete. The significant reduction in chloride ion permeability(charge passed) of concrete with pozzolans due to formation of a discontinuous macro-pore system which inhibits flow. It is shown that there is a relationship between chloride ion permeability and depth of chloride ion penetration of concrete, based on the pore structure (porosity and pore size distributions) of cement paste.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.430-430
• /
• 2007

In general, polyimides (PIs) are used in liquid crystal displays (LCDs) as alignment layer of liquid crystals (LCs). Up to date, the rubbing alignment technique has been widely used to align liquid crystals on the PI surface, which is suitable for mass-production of LCDs because of its simple process and high productivity. However, this method has some disadvantages. Rubbed PI surfaces include the debris left by the cloth and the generation of electrostatic charges during rubbing process. Therefore, rubbing-free techniques for LC alignment are strongly required in LCD technology. In this experiment, PI was uniformly coated on indium-tin-oxide electrode substrates to form LC alignment layers using a spin-coating method and the PI layers were subsequently imidized at 433 K for 1 h. The thickness of the PI layer was set at 50 nm. The LC alignment layer surfaces were exposed to an $Ar^+$ ion-beam under various ion-beam energies. The antiparallel cells and twisted-nematic (TN) cells for the measurement of pretile angle and electro-optical characteristics were fabricated with the cell gap of 60 and $5\;{\mu}m$, respectively. The LC cells were filled with nematic LC (NLC, MJ001929, Merck) and were assembled. The NLC alignment capability on ion-beam-treated PI was observed using photomicroscope and the pretilt angle of the NLC was measured by the crystal-rotation method at room temperature. Voltage-transmittance (V-T) and response time characteristics of the ion-beam irradiated TN cell were measured by a LCD evaluation system.