• 전기전자학회논문지
• /
• 제16권2호
• /
• pp.116-120
• /
• 2012

본 논문에서는 밀리미터파 응용에 사용 가능한 우수한 성능의 50 nm InGaAs/InAlAs/GaAs metamorphic HEMT를 구현하였다. 게이트 길이가 50 nm이며 단위 게이트 폭이 30 ${\mu}m$인 2개의 게이트를 가지고 있는 MHEMT의 측정결과, 740 mA/mm의 드레인 포화 전류밀도와 1.02 S/mm의 상호전달 전도도를 얻었으며 전류이득차단주파수와 최대공진주파수는 각각 430 GHz와 406 GHz의 특성을 나타내었다.

• 한국정밀공학회지
• /
• 제25권4호
• /
• pp.134-139
• /
• 2008

A spirally arrayed nano-pattern is designed as a model pattern for the next generation optical storage media. The pattern consists off types of embossed rectangular dot, which are 50nm, 100nm, 150nm and 200nm in length and 50nm in width. The height of the dot is designed to be 50nm. The pitch of the spiral track of the pattern is 100nm. A ER(Electron resist) master for this pattern is fabricated by e-beam lithography process. The ER is first spin-coated to be 50nm thick on a Si wafer and then the model pattern is written on the coated ER layer by e-beam. After developing this pattern written wafer in the solution, a ER pattern master is fabricated. The most conventional e-beam machine can write patterns in orthogonal way, so we made our own pattern generator which can write the pattern in circular or spiral way. This program generates the patterns to be compatible with the e-beam machine from Raith(Raith 150). To fabricate 50nm pattern master precisely, a series of experiments were done including the design compensation for the pattern size, optimization of the dose, acceleration voltage, aperture size and developing. Through these experiments, we conclude that the higher accelerating voltages and smaller aperture size are better for mastering the nano pattern which is in order of 50nm. With the optimized e-beam lithography process, a spiral arrayed 50nm pattern master adopting PMMA resist was fabricated to have dimensional accuracy over 95% compared to the designed. Using this pattern master, a metal pattern stamp will be fabricated by Ni electro plating for injection molding of the patterned plastic substrate.

• Current Photovoltaic Research
• /
• 제10권1호
• /
• pp.28-32
• /
• 2022

We investigated the optical and electrical characteristics of ITO/Ag/ITO (IAI) 3-layer thin films prepared by using RF/DC sputtering. To measure the thickness of all thin film samples, we used scanning electron microscopy. As a function of Ag thickness we characterized the optical transmittance and sheet resistance of the IAI samples by using UV-Visible spectroscopy and Hall measurement system, respectively. While the thickness of both ITO thin films in the 3-layered IAI samples were fixed at 50 nm, we varied Ag layer thickness in the range of 0 nm to 11 nm. The optical transmittance and sheet resistance of the 3-layered IAI thin films were found to vary strongly with the thickness of Ag film in the ITO (50 nm)/Ag(t₀)/ITO (50 nm) thin film. For the best transparent conducting oxide (TCO) electrode, we obtained a 3-layered ITO (50 nm)/Ag (t₀ = 8.5 nm)/ITO (50 nm) that showed an avrage optical transmittance, AVT = 90.12% in the visible light region of 380 nm to 780 nm and the sheet resistance, R_□ = 7.24 Ω/□.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.879-882
• /
• 2015

본 연구에서는 시뮬레이션을 통해 채널 폭과 채널 도핑 형태에 따른 수직형 나노와이어 GAA MOSFET의 특성을 비교, 분석하였다. 첫 번째로, 드레인의 끝부분을 20nm로 고정시키고 소스의 끝부분이 30nm, 50nm, 80nm, 110nm로 식각된 모양으로 설계한 구조의 특성을 비교, 분석하였다. 두 번째로는 드레인, 채널, 소스의 폭이 50nm로 일정한 직사각형 모양의 구조를 설계하였다. 이 구조를 기준으로 삼아 드레인의 끝부분이 20nm가 되도록 식각된 사다리꼴 모양과 반대로 소스의 끝부분이 20nm가 되도록 식각된 역 사다리꼴 모양의 구조를 설계하여 위 세 구조의 특성을 비교, 분석하였다. 마지막으로는 폭 50nm의 직사각형 구조의 채널을 다섯 구간으로 나누어 도핑 형태를 다양하게 변화시킨 것의 특성을 비교, 분석하였다. 첫 번째 시뮬레이션에서는 채널 폭이 가장 작을 때, 두 번째 시뮬레이션에서는 사다리꼴 모양의 구조일 때, 세 번째 시뮬레이션에서는 채널의 중앙 부분이 높게 도핑 되었을 때 가장 좋은 특성을 보였다.

• 대한금속재료학회지
• /
• 제46권2호
• /
• pp.88-96
• /
• 2008

Thermal evaporated 10 nm-$Ni_{50}Co_{50}$/(70 nm-poly)Si films were deposited to examine the energy saving properties of silicides formed by rapid thermal annealing at temperature ranging from 500 to $1,100^{\circ}C$ for 40 seconds. Thermal evaporated 10 nm-Ni/(70 nm-poly)Si films were also deposited as a reference using the same method for depositing the 10 nm-$Ni_{50}Co_{50}$/(70 nm-poly)Si films. A four-point probe was used to examine the sheet resistance. Transmission electron microscopy (TEM) and X-ray diffraction XRD were used to determine cross sectional microstructure and phase changes, respectively. UV-VIS-NIR and FT-IR (Fourier transform infrared spectroscopy) were used to examine the near-infrared (NIR) and middle-infrared (MIR) absorbance. TEM analysis confirmed that the uniform nickel-cobalt composite silicide layers approximately 21 to 55 nm in thickness had formed on the single and polycrystalline silicon substrates as well as on the 25 to 100 nm thick nickel silicide layers. In particular, nickel-cobalt composite silicides showed a low sheet resistance, even after rapid annealing at $1,100^{\circ}C$. Nickel-cobalt composite silicide and nickel silicide films on the single silicon substrates showed similar absorbance in the near-IR region, while those on the polycrystalline silicon substrates showed excellent absorbance until the 1,750 nm region. Silicides on polycrystalline substrates showed high absorbance in the middle IR region. Nickel-cobalt composite silicides on the poly-Si substrates annealed at $1,000^{\circ}C$ superior IR absorption on both NIR and MIR region. These results suggest that the newly proposed $Ni_{50}Co_{50}$ composite silicides may be suitable for applications of IR absorption coatings.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.35-38
• /
• 2008

A pattern master and a Ni stamper for 50nm class of patterns are fabricated through e-beam lithography and Ni electroforming process. A model pattern set is designed, which is based on unit patterns of 50nm, 100nm, 150nm and 200nm in length and 50nm in width. The e-beam process is optimized to fabricate designed patterns with some parameters including dose, accelerating voltage, focal distance and developing time. For Ni electroforming to fabricate Ni stamper, a seed layer, a conducting layer, is deposited first on the pattern master fabricated by an e-beam lithography process. Ni, Ti/Ni and Cr are first tested to find optimal seed layer process. Currently the best result is obtained when adopting Cr deposited to be 100nm thick with continuous tilting motion of the master substrate during the deposition process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1532-1536
• /
• 2007

A plastic substrate with tiny rectangular pillars less than 100nm is injection molded to study pattern replication in injection molding. The size of the substrate is 50mm ${\times}$ 50mm and 1mm thick. The substrate has 9 patterned areas of which size is 2mm ${\times}$ 2mm respectively. The lengths of the pillars are 50nm, 100nm, 150nm and 200nm and the width and height are 50nm and about 100nm respectively. A pattern master is fabricated by e-beam writing using positive PR(photo resist) and then a nickel stamper replicated from the PR master by nickel electro-plating. Cr is deposited on the PR pattern master before nickel electro-plating as a conducting layer. Using this nickel stamper, several injection molding experiments are done to investigate effects of the injection molding parameters such as mold temperature, injection rate, packing pressure or pattern location on the replication of the patterns under 100nm.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.275-278
• /
• 2002

MOSFET의 게이트 길이가 50nm이하로 작아지면 소자를 설계함에 있어 고려해야 하는 많은 문제점들이 존재하게 된다. 본 논문에서는 MOSFET 소자에 대한 문턱 전압 특성을 조사하였다. 소자에 대한 스케일링은 generalized scaling을 사용하였고 게이트 길이 100nm에서 30nm까지 시뮬레이션 하였다. 이때 나노 구조 MOSFET에 대한 스케일링의 한계를 볼 수 있었다. 문턱 전압을 구하는 방법으로는 선형 추출 방법을 사용하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권12호
• /
• pp.1626-1631
• /
• 2010

An experiment was conducted to evaluate the effect of dietary replacement of normal maize (NM) with quality protein maize (QPM) on performance, immune response and carcass characteristics of broiler (Krishibro) chickens. Six experimental diets were prepared separately for starter and finisher phases. Diet 1 was a control diet formulated with NM and soybean meal. In diets 2-5, the NM was replaced with QPM at 25, 50, 75 and 100%, respectively. Diet 6 was the same as the control diet, but supplemented with synthetic lysine similar to the industry standard. Each test diet was fed to 8 replicates, each of 5 chicks, reared in stainless steel battery brooders. The AME content of QPM (3382 kcal/kg) was similar to that of NM (3,352 kcal/kg), but protein (9.91 vs. 8.94%), lysine (0.40 vs. 0.26%) and tryptophan (0.09 vs. 0.07%) contents of QPM were higher than NM. Dietary replacement of NM with 50% QPM significantly (p<0.05) improved body weight gain, feed conversion ratio, humoral immune response, relative bursa weight, and breast muscle yield and lowered abdominal fat content. No further improvement in these parameters was recorded by increasing the level of replacement of NM with QPM to either 75% or 100%. Further, the improvement noticed in the 50% QPM group was similar to the group fed the NM diet with lysine supplementation, and thus dietary replacement of NM with QPM at 50% did not need extra synthetic lysine supplementation. It is concluded that dietary replacement of NM with QPM at the 50% level resulted in optimum performance, higher breast muscle yield and higher immune response in broiler chickens.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.202-209
• /
• 2004

침전법 및 솔젤법에 의하여 10- l5 nm 및 500 nm 크기의 구형 TiO$_2$ 분말을 제조하고 수열합성법으로 50-70 nm 및 120-250 nm 크기의 침상 hydroxyapatite(이하 HA라 표기) 입자를 각각 제조한 다음, 두 분말의 조성비를 달리한 세 종류(HA/TiO$_2$비; 75/25, 50/50, 25/75wt%)의 HA/TiO$_2$ 복합분말을 planetary 볼밀로 혼합하여 각각 제조하였다. 복합분말을 탄소몰드에 넣고 hot-press를 사용하여 가압소결로 치밀체를 제조하였는데, 가압도중 대부분의 HA가 tricalcium phosphate(이하 TCP라 표기)로 분해되면서 $\beta$-TCP/TiO$_2$ 복합체가 제조되었다. 제조된 복합체의 미세구조와 소결밀도는 복합분말의 형태와 조성에 따라 변화하였는데, 입자가 균질하게 분산되어 있는 미세구조를 갖는 복합분말을 소결한 경우, 치밀한 소결체를 얻을 수 있었으며, 소결온도가 증가할수록 균질한 미세구조를 나타내었다. 또한 복합분말 내 HA 함량이 증가하면서 소결체의 입자크기가 증가한 반면, 소결밀도가 감소하고, 미세구조는 불균질하였다. 반대로 HA분말에 비하여 TiO$_2$분말의 함량이 큰 시편은 전체적으로 작은 입자크기와 균질한 미세구조를 나타냈으며, 소결밀도 또한 증가하였다.