• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1541-1543
• /
• 2003

The microwave dielectric properties of $0.6Mg_4Ta_2O_9-0.4TiO_2$ ceramics were investigated. All sample of $0.6Mg_4Ta_2O_9-0.4TiO_2$ ceramics were prepared by the conventional mixed oxide method, and sintered in the temperature of $1350^{\circ}C{\sim}1450^{\circ}C$. The structural properties of $0.6Mg_4Ta_2O_9-0.4TiO_2$ ceramics were investigated by the X-ray diffraction meter. According to the X-ray diffraction patterns of $0.6Mg_4Ta_2O_9-0.4TiO_2$ ceramics, the major phase of the hexagonal $0.6Mg_4Ta_2O_9-0.4TiO_2$ were presented, In the case of $0.6Mg_4Ta_2O_9-0.4TiO_2$ ceramics sintered at $1400^{\circ}C$ for 5hr., the dielectric constant, quality factor and temperature coefficient of resonant frequency were 12.19, 109.411GHz, -17.21ppm/$^{\circ}C$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.172-177
• /
• 2003

Effect of glass addition on the low-temperature sintering and microwave dielectric properties of $BaTi_4O_9$-based ceramics were studied to develop the materials for the functional substrate of low-temperature co-fired ceramics. When 10 wt% of glass was added, sufficient densification was obtained and the relative density more than 98% was reached at the sintering temperature of$875{\circ}C$. The microwave dielectric properties were k=32, Q＊f=9000 GHz, ${ au}_f$=10 ppm/${\circ}C$. As the amount of glass increased, phase decompositions from $BaTi_4O_9;to;BaTi_5O_{11};and;Ba_4Ti_{13}O_{30}$ was observed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.176-181
• /
• 2006

We have built the close range Dicke type radiometer with 35GHz of frequency, which consists of two stage low noise amplifier and diode detector to calibrate temperatures of materials. We have present thermal calibration methods using millimeter-wave radiometer. Output voltages linearly increase with temperatures between 299K and 309K. We are able to measure lower temperature using the liquid nitrogen although results are somewhat unstable.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.388-391
• /
• 2010

최근 세계전파통신회의(WRC)에서는 자연 재해를 예방하여 인명 안전을 보호하기위해 해양 및 우주 등 지구 환경 감시를 위한 레이더 주파수의 분배를 시행하였고, 또한 WRC-12 에서도 추가적 분배를 논의하고 있다. 이러한 추세의 일환으로 정부에서는 3.0 5.6, 9.3 GHz 등의 대역에 탐지 레이더를 설치 및 운용 중에 있으며, 일반적으로 레이더 송신 출력의 비고조파 불요 및 2차 고조파 스퓨리어스 방사가 해당하는 M/W 방송 중계망에 유입되어 전송품질을 열화 시키는 주요인 되기도 한다. 본 논문에서는 M/W 방송 중계망에 레이더 간섭이 유입되는 경우에 대해 안정된 전송품질 확보를 위한 보호비, 전송 오류, 가용율 설정 등을 산출하고 결과를 분석한다. 분석 대상으로는 탐지 레이더 신호의 비고조파 불요 방사와 2차고조파 스퓨리어스 방사가 현재 운용중인 6.2 GHz 대의 방송 중계 시스템의 수신기에 유입되는 경우로 간섭 분석을 수치계산을 통해 제시한다. 적용한 분석 방법은 상이한 주파수 대역에서 이종 서비스 간의 간섭 분석 및 주파수 조정절차에도 적용이 가능하다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.833-838
• /
• 2000

In this paper, a novel type of wideband single-patch microstrip antenna using the reactive-loading technique is presented. We demonstrated that, by inserting stubs at both of the radiating edges, the frequencies of the two resonant modes are closely spaced to form a wide operating bandwidth. Segmentation technique and cavity model are used to analyze the antenna characteristics and experimental data are show to be in good agreement with the calculated results. With the proposed structure, the measured antenna bandwidth of 230MHz is obtained, which is almost 2.65 times larger than that of an unloaded rectangular patch antenna and fully covers the whole frequency range of 1.885GHz~2.025GHz allocated to IMT-2000.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.2
• /
• pp.67-78
• /
• 1994

1996년부터 유럽연합을 중심으로 전자파내성(Electromagnetic immunity; 흔히 군사규격에서는 전자파감응성(electromagnetic susceptibility)이라 함) 규제가 본격적으로 시작될 전망이다. 이러한 전자 파내성 규제는 우리가 과거 '80년대 초에 경험했던 전자파방출(electromagnetic emission; 흔히 electro- magnetic interference 라고도 표현한다) 규제에 비해 규제주파수가 대폭 확장됨(9KHz - 1GHz .rarw. 50/60 Hz - 40 GHz)은 물론, 규제항목도 크게 늘어나기(2개 항목 .rarw. 11개 항목)때문에 본격 규제가 시작되면 우리 산업체에 큰 피해를 초래할 것으로 우려된다. 특히 "복사 전자기장에 대한 전자파내성 요구사항"은 일부 전자파내성 측정항목을 포함하고 있던 안전규 격 등에서도 다루고 있지 않던 것으로서 우리에게는 매우 생소한 항목이다. 이 항목은 과거 미국의 군사 규격등에서 요구했던 항목인데, 앞으로 각국의 상용규격에도 대폭 추가될 것으로 보인다. 이러한 규제는 우리의 생활환경에서 결코 빼놓고 생각할 수 없는, 동시에 가장 큰 전자파장해원인 의도적 복사로서의 방 송신호 및 각종 무선통신 신호에 대해 전기, 전자기기가 전자파내성을 갖고, 성능저하나 오동작을 유발하 지 않아야 함을 요구하는 것이다. 이러한 항목의 평가를 위해서는 대형 시험환경(EMS chamber)과 표준 전자기장 발생장치(signal genera- tors + high power amplifiers), 그리고 오동작 모니터링 장치(monitorring equipments) 등이 필요하기 때 문에 평가시스템 구성에 막대한 비용이 소요된다. 따라서 시스템 구성에 매우 신중을 기해야 하며, 관련 국제표준화규격을 사전에 철저히 이해하여 관련 시험검사를 위한 투자계획을 수립하는 것이 바람직하다. 본 고에서는 복사 전자기장에 대한 대표적인 국제표준화규격을 소개하고, 나아가서 그러한 항목의 평가 시스템의 설계 및 구현에 대해서 설명할 것이다.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.7 no.1
• /
• pp.41-58
• /
• 2007

A compact and broadband $4{\times}1$ array antenna was developed for 3G smart antenna system testbed. The $4{\times}1$ uniform linear array antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% ($VSWR{\leq}1.5$), 21.78% ($VSWR{\leq}2$) with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.83-89
• /
• 2020

A microstrip feedline based open ended folded-slot antenna is proposed for ultra-wideband (UWB) applications. The prototype of the proposed antenna is fabricated on the FR4 dielectric substrate. The proposed antenna has a wide n-shaped slot that is useful for designing circuit components on the same printed circuit board (PCB) as that of the radio frequency (RF) modules. The proposed antenna use two kinds of slots as radiators, and each slots have different characteristics because of the different type of ends of the slot. The wideband characteristic can be obtained by resonances of each slot which are occurred at different frequencies. The measured impedance bandwidth (S₁₁≤ -10 dB) is 2.9-11.56 GHz, and the antenna peak gain is 2-4 dBi over the UWB range. The antenna has a stable omni-directional radiation pattern and only a small group-delay variation across the UWB passband. In addition, we present a modified design with band-notched characteristics of a 5 GHz wireless local area network (WLAN) frequency band.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.11-22
• /
• 2016

Clock skew scheduling is one of the essential steps to be carefully performed during the design process. This work addresses the clock skew optimization problem integrated with the consideration of the inter-dependent relation between the setup and hold times, and clock to-Q delay of flip-flops, so that the time margin is more accurately and reliably set aside over that of the previous methods, which have never taken the integrated problem into account. Precisely, based on an accurate flexible model of setup time, hold time, and clock-to-Q delay, we propose a stepwise clock skew scheduling technique in which at each iteration, the worst slack of setup and hold times is systematically and incrementally relaxed to maximally extend the time margin. The effectiveness of the proposed method is shown through experiments with benchmark circuits, demonstrating that our method relaxes the worst slack of circuits, so that the clock period ($T_{clk}$) is shortened by 4.2% on average, namely the clock speed is improved from 369 MHz~2.23 GHz to 385 MHz~2.33 GHz with no time violation. In addition, it reduces the total numbers of setup and hold time violations by 27.7%, 9.5%, and 6.7% when the clock periods are set to 95%, 90%, and 85% of the value of Tclk, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.443-450
• /
• 2016

The linearization technique for low noise amplifier (LNA) has been implemented in standard $0.18-{\mu}m$ BiCMOS process. The MOS-BJT derivative superposition (MBDS) technique exploits a parallel LC tank in the emitter of bipolar transistor to reduce the second-order non-linear coefficient ($g_{m2}$) which limits the enhancement of linearity performance. Two feedback capacitances are used in parallel with the base-collector and gate-drain capacitances to adjust the phase of third-order non-linear coefficients of bipolar and MOS transistors to improve the linearity characteristics. The MBDS technique is also employed cascode configuration to further reduce the second-order nonlinear coefficient. The proposed LNA exhibits gain of 9.3 dB and noise figure (NF) of 2.3 dB at 2 GHz. The excellent IIP3 of 20 dBm and low-power power consumption of 5.14 mW at the power supply of 1 V are achieved. The input return loss ($S_{11}$) and output return loss ($S_{22}$) are kept below - 10 dB and -15 dB, respectively. The reverse isolation ($S_{12}$) is better than -50 dB.