• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.81-87
• /
• 2006

A small size broadband microstrip patch antenna with small ground plane has been fabricated using MEMS. Multiple layer substrates we used to realize small size and broadband characteristics. The microstrip patch is divided into 4 pieces and each patch is connected to each other using a metal microstrip line. The fabrication please process is simple and only one mask is needed. Two types of microtrip antennas are fabrication Type A is the microstrip antenna with metal lines and type B is the microstrip antenna without metal lines. The size of proposed microstip antenna is $8{\times}12{\times}2mm^3$ and the experimental results show that the antenna type A and type B have the bandwidth of 420MHz at 5.3 GHz and 480MHz at 5.66 GHz, respectively

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.81-86
• /
• 2008

The paradigm of information & communication is rapidly changed into ubiquitous environment based electromagnetic wave, and antenna technology in the wireless ubiquitous communication is remarkably developed. Mini chip antenna has its within small card compared to the external AP antenna. Designed and Fabricated WLAN antenna has a broadband characteristics of 2.4~2.5GHz and 4.9~5.85GHz, and can be used triple mode of IEEE 802.11.a,g.b, and it has comparatively a constant performance in the dual frequency band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.938-943
• /
• 2015

The proposed circular patch antenna was designed to include relative bandwidth of above 25% as designed by the FCC in the FCC in the 3.1 ~ 10.6 GHz band. The antenna was induced to have a wide band characteristic through two structures of the usual microstrip line and a microstrip line with a linear change in impedance. The proposed finally antenna was designed using an FR4_epoxy substrate with 4.7% permittivity, 0.02 of loss tangent, and 1.6 mm of thickness, and was simulated with the use of HFSS made by Ansys. Return loss at frequency, VSWR, radiation pattern and the gain of the antenna were analysed. As a result, if satisfied a return loss of -10 dB and $VSWR{\leq}2$ from 2.28 ~ 13.35 GHz, showing about the bandwidth of 11.89 GHz, and the radiation pattern was unidirectional in all bands. The antenna gain gradually increased from 2 ~ 8 GHz and had the highest gain of 7.92 dBi at 8 GHz. and the gain gradually decreased in the 9 ~ 12 GHz band.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.124-127
• /
• 2010

본 논문에서는 소형 SMD 솔레노이드 형태의 RF 칩 인덕터의 최적 구조를 도출하였다. $1.0\times0.5\times0.5mm^3$ 크기의 96% $Al_2O_3$ 코아는 $40{\mu}m$ 직경의 구리 코일을 4회 권선하여 8.57nH의 인덕턴스, 37.6의 품질계수와 6.05GHz의 SRF를 가진다. $40{\mu}m$ 직경의 구리 코일을 0.35mm 솔레노이드 길이로 중앙에 6회 권선하였을 경우가 250MHz11.2nH의 인덕턴스, 29.8의 품질계수와 5.6GHz의 SRF로 가장 우수하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.13-19
• /
• 2006

In this paper, a broadband Microwave Power Module(MPM) operating at 7 - 11 GHz is designed and fabricated. The MPM consists of a SSA (Solid State Amplifier) and a conventional TWT (traveling Wave Tube). This combined module takes advantage of a low noise and high gain of SSA. The computer modeling and simulation of the SSA are designed by the use of the ADS (Advanced Design System) software. The SSA is designed by configurating the CSSDA (Cascaded Single Stage Distributed Amplifier). The broadband MPM is measured to be noise figure 8.3 - 10.02 dB at 7 - 11 GHz bandwidth, output power of 38.12 dBm at 9 GHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.620-624
• /
• 2010

In this paper, design and manufactured UWB BPF. Manufactured UWB BPF can miniaturize the structure by controlling impedance and biographical one dimension that is allocated in transmission line each section. Proposed UWB BPF designed most suitable using Agilent company's ADS2008 Momentum and Ansoft company's HFSS 10. Manufactured UWB BPF has pass-band filter of 3.1 [GHz]~10.6 [GHz] and insertion loss is 0.39 [dB] in 8.3 [GHz], and reflection loss displayed special quality of 12.394 [dB] in 9.37 [GHz].

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.193-196
• /
• 2000

본 논문에서는 FG-CPW(Finite-Ground Coplanar Wave-Guide) 구조의 단일 평형 다이오드 믹서에 대해서 논의된다. 주파수 영역은 무선 LAN 대역으로 선택하였다. RF 신호는 5.725-5.875 GHz, LO 신호는 5.58GHz, 그리고 IF 신호는 140 MHz가 사용된다. 제시된 FG-CPW 구조의 LPF(low pass filter)는 회의크기를 줄일 수 있으며, 불필요한 하모닉 억제 특성이 우수하다. 5.635 GHz에서 5 dBm의 Power를 갖는 LO신호가 입력될 때 6.2 dB 의 혼합기의 변환손실을 얻는다. 또한 LO-RF isolation과 LO-IF isolation은 각각 30 dB $\Omega$dB 의 특성을 보인다. 이 혼합기는 CPW 구조가 일반적으로 알려진 밀리미터 대역에서의 장점뿐만 아니라 C-Band의 무선 LAN 분야에도 충분히 응용될 수 있으리라 기대된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.557-564
• /
• 2000

A microstrip band-pass filter using cross-coupled resonators is designed and studied experimentally. The cross-coupled microstrip hairpin resonator filters exhibit ripples in both passband and stopband. These ripples can improve both frequency selectivity and insertion loss. The cross-coupled filters are not only simple and compact in configuration, but also have great flexibility to form filters into a variety of size. In this paper, a microstrip band-pass filter using cross-coupled resonators is designed at the center frequency of 1.8GHz with bandwidth of 5.0% using Ensemble software. The experimental results show that the bandwidth is about 4.53% at 1.8GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.574-581
• /
• 2002

Microstrip $8{ imes}2$ sub-array antennas for a extension to active phased array antennas are designed, fabricated and measured for TX/RX dual operation in satellite communication and a reception of satellite broadcasting. For the frequency range from 11.7 to 12.75 GHz for RX and from 14 to 14.5 GHz for TX, two orthogonal linear polarizations of ${pm}45^{\circ}$ are used to transmit and receive simultaneously with one radiator. They adopt dual resonance between two patches for wideband characteristics in RX band and show isolation characteristics over 20 dB. An electrical beam tilt of $30^{\circ}$ is achieved and a tapered power distribution, narrow element spacing are used for the purpose of low side-lobe characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.386-391
• /
• 2006

In this paper, a design of V-type Linearly Tapered Slot Antenna(V-LTSA) with uniplanar microstrip-to-coplanar stripline(CPS) transitions is presented. The effect of reducing and increasing with taper width G, teper length L and opening angle are also considered at 5.8 GHz. In the result of a simulation by using CST-MWS, the return loss characteristic came very wide band about 4.3GHz, or 1.8 Octave. Proposed V-LTSA design schemes are expected to be a good antenna for microwave and millimeter-wave communcations.