• 대한소아치과학회지
• /
• 제36권3호
• /
• pp.325-336
• /
• 2009

건강한 정상 교합 어린이 83명(남자 42명, 여자 41명)을 대상으로 보호자 동의하에 cone beam CT 영상을 촬영하여, 하악 제 1대구치의 맹출 양상을 연구하였다. 대상을 발육 정도에 따라 Nolla stage(4-10단계)로 구분한 후 삼차원 기준 평면인 전두면(frontal), 시상면(sagittal), 수평면(horizontal)에서 각각 하악 제 1대구치의 맹출 양상을 관찰하였다. 1. 전두면과 수평면에서, 하악 제 1대구치간 폭경은 감소하였는데, stage 5에서 stage 8까지 가장 크게 감소했다가 약간 증가하였다. 2. 시상면과 전두면에서, 하악 제 1대구치 맹출량은 교합평면을 기준으로 stage 5에서 stage 7까지 가장 많은 맹출 이동을 보였다. 3. 수평면과 시상면에서, 하악 제 1대구치는 제 2유구치 원심면으로부터 stage 4에서 stage 6까지 원심으로 이동하였고 이후 큰 변화가 없었다. 4. 시상면에서, 교합 평면과 하악 제 1대구치의 근원심 치축이 이루는 각은 stage 4에서 stage 8까지 증가하였다. 5. 전두면에서, 교합 평면과 하악 제 1대구치의 협설측 치축이 이루는 각은 지속적으로 증가하였다. 6. 수평면에서, 정중 시상면과 하악 제 1대구치의 치축이 이루는 각은 stage 5부터 stage 8까지 증가하다 stage 8이후에는 다시 약간 감소하였다.

• 한국CDE학회논문집
• /
• 제15권5호
• /
• pp.354-361
• /
• 2010

The paper presents an efficient computation of optimal tool length for 5-axis mold & die machining. The implemented procedure processes an NC file as an initial input, where the NC data is generated by another commercial CAM system. A commercial CAM system generates 5-axis machining NC data which, in its own way, is optimal based on pre-defined machining condition such as tool-path pattern, tool-axis control via inclination angles, etc. The proper tool-length should also be provided. The tool-length should be as small as possible in order to enhance machinability as well as surface finish. A feasible tool-length at each NC block can be obtained by checking interference between workpiece and tool components, usually when the tool-axis is not modified at this stage for most CAM systems. Then the minimum feasible tool-length for an NC file consisting of N blocks is the maximum of N tool-length values. However, it can be noted that slight modification of tool-axis at each block may reduce the minimum feasible tool-length in mold & die machining. This approach can effectively be applied in machining feature regions such as steep wall or deep cavity. It has been implemented and is used at a molding die manufacturing company in Korea.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1216-1228
• /
• 2016

• 한국작물학회지
• /
• 제33권1호
• /
• pp.23-30
• /
• 1988

본 시험은 연초의 생육작황에 따라서 적심시기와 정도를 두어 처리하였을 때 잎담배의 품질형질에 미치는 영향을 구명코자 수행하였던 바 다음과 같은 결과를 얻었다. 1. 책상조직 및 발달은 적심시기에 따라 발뢰기＆gt;개화시＆gt;개화만기＆gt; 만기 순으로 적심정도에 따라서는 치엽 4매＆gt; 치엽 2매＆gt; 화뢰 적심 순으로 발달되었다. 2. A급작황에서는 개화만기 B급작황에서는 개화시 치엽 2매를 적심할 때 끽미에 관련있는 전당/니코틴의 비는 9.0, 9.7로 가강 양호하였으며, 방향성 물질인 석유에텐추출물을 9.9%, 8.4%로 가장 높게 나타났다. 3. 품질에 크게 영향하는 요인은 생태조직과 건조엽중 내용성분으로 생태조직의 구성형질들이 품질에 직접 영향하는 효과를 보면 책상조직 43.2%, 해면조직 26.5%, 조직비 17.7%, 엽후 6.7%, 세포간극율 3.1 %, 엽형지수 2.8% 순이며, 내용성분 형질은 니코틴 40.6%, 전당/니코틴 35.7%, 전당 10.0%, 전질소/니코틴 7.0% 전질소 4.6%, 석유 에텔추출물 2.1% 순으로 품질에 영향을 미쳤다. 4. 양질엽 생산을 위해서는 수량이 10a당 250∼280kg 생산되는 A급작황에서는 개화만기에 치엽 2매 적심을, 200kg 내외 생산되는 B급작황에서는 개화시 치엽 2매를 붙여 적심하는 것이 가장 바람직 할 것으로 생각된다.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.402-408
• /
• 2021

An off-axis system refers to an optical system in which the optical axis and normal vector at the vertex of each surface do not match. The most important specification in an optical system is its focal length. Among the various methods for measuring the focal length, the most suitable method for the off-axis system is the method that adopts magnification. However, head-mounted display (HMD) optics must be measured while considering the virtual image distance, which is not infinity owing to product characteristics. For the virtual image distance, a camera with a focusing function was used. By measuring HMD optics via this magnification method, the error generated in this measurement was 0.68% of the HMD's focal length, which is within the 1%-3% range of the conventionally permitted design error for the focal length allowed at the optical design stage. Therefore, it can be verified that the measurement accuracy of the method proposed in this study is sufficiently feasible in practice.

• Toxicological Research
• /
• 제11권1호
• /
• pp.37-42
• /
• 1995

Effect of cadmium on the early amphibian development was analyzed through FETAX (Frog Embryo Teratogenesis Assay: Xenopus). Embryos manifested concentration-dependent mortality and realformations; shortage of anterior-posterior axis gut realformation, ocular anomalies, bent notochord, misshapen dorsal fin, and derreal blisters. The treatment with 1.5ppm cadmium solution caused 100% mortality and concentration of lppm did not kill the embryos that caused 100% anomaly. The teratogenic index (TI = LC50 /EC50) was 2.8 indicating that $CdCl_2$ is teratogenic for Xenopus laevis. Embryos that were pulsetreated with at early to late blastula stage (St. 3-9) and mid to late blastula stage (St. 6-10) showed relatively strong resistance to cadmium, but the embryos treated at gastrula stage (St. 10-13) showed high mortality. And the embryos treated at tailbud stage (after St. 25) showed highest mortality of any other early stages. Effects of temperature were studied through pulse- treatment during gastrula stage at $20^{\circ}C$ and $30^{\circ}C$. The embryos treated with 7.5ppm at $30^{\circ}C$ and 15ppm at $20^{\circ}C$ caused 100% mortality respectively, indicating that higher temperature had more severe toxic effect. One of the most peculiar effect of cadmium at gastrulation was distortion of the tail. The probable cause of toxic effect of Cd was discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.771-772
• /
• 2013

• 반도체디스플레이기술학회지
• /
• 제6권4호
• /
• pp.23-27
• /
• 2007

Rotary stages in semiconductor, display industry and many other fields require challenging accuracy to perform their functions properly. Especially, Axis of rotation error on rotary system is significant; such as the spindle error motion of the aligner, wire bonder and inspector machine which result in the poor quality products. To evaluate and improve the performance of such precision rotary stage, undesired movements on the other 5 degrees of freedom of the rotary stage must be measured and analyzed. In this paper, we have measured the three translations and two tilt motions of the worm gear type spindle with high precision capacitive sensors. To obtain the radial error motion, we have used Donaldson's reversal technique. And the axial components of the spindle tilt error motion can be obtained accurately from the axial direction outputs of sensors by Estler face motion reversal technique. Further more we have designed and developed the sensor mounting jig with standard cylinder for reversal method.

• Journal of Electrochemical Science and Technology
• /
• 제3권1호
• /
• pp.29-34
• /
• 2012

The structural changes of $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode material for lithium ion battery during the first charge was investigated in comparison with $Li_{1-x}Ni_{0.8}Co_{0.15}Al_{0.05}O_2$ using a synchrotron based in situ X-ray diffraction technique. The structural changes of these two cathode materials show similar trend during first charge: an expansion along the c-axis of the unit cell with contractions along the a- and b-axis during the early stage of charge and a major contraction along the c-axis with slight expansions along the a- and b-axis near the end of charge at high voltage limit. In $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode, however, the initial unit cell volume of H2 phase is bigger than that of H1 phase since the c-axis undergo large expansion while a- and b- axis shrink slightly. The change in the unit cell volume for $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ during charge is smaller than that of $Li_{1-x}Ni_{0.8}Co_{0.15}Al_{0.05}O_2$. This smaller change in unit cell volume may give the $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode material a better structural reversibility for a long cycling life.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.93-102
• /
• 2006

This paper proposes a controller design analysis for three-axis CNC systems considering both contouring and tracking performance. The proposed analysis inclusively combines axial controllers for each individual feed drive system together with cross-coupling controller at the beginning design stage as an integrated manner. These two controllers used to be separately designed and analyzed since they have different control objectives. The proposed scheme includes a stability analysis for the overall control system and a performance analysis in terms of contouring and tracking accuracy. Computer simulation is performed and the results show the validity of the proposed methodology. Further, the results can be used as a basic guideline in systematic and comprehensive controller design for multi-axis CNC systems.