• Journal of the Korea Society for Simulation
• /
• v.22 no.4
• /
• pp.67-82
• /
• 2013

This paper presents multi-fidelity modeling and simulation (M&S) methodology to enhance simulation performance of engineering-level defense models. In this approach, a set of models with varying degrees of fidelity is exercised to reduce computational expense maintaining a similar level of system effectiveness. For multi-fidelity M&S principles, this paper defines model fidelity from two perspectives (i.e., model behavior and execution), and suggests the Fidelity Change Point (FCP) to specify the fidelity conversion. With these concepts, this paper centers on three ideas: 1) two models' structure which are the Behavioral-Fidelity Interchangeable Model (B-FIM) and the Executional-Fidelity Interchangeable Model (E-FIM), 2) modeling formalism, and 3) a simulation algorithm to support them. From an abstract case study regarding a target tracking scenario with the utilization of the proposed method, we can gain interesting experimental results regarding the enhancement of simulation performance. Finally, we expect that this work will serve various M&S-based analysis areas for enhancing simulation performance.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.64-76
• /
• 1999

In this paper hydroelastic experimental techniques of very large floating offshore structures are suggested based on the model test carried out in the UOU Ocean Engineering Wide Tank. The prototype is a box-shaped floating structure with length of 300m, breadth of 60m, depth of 2m and draft of 0.5m and longitudinal bending rigidity as $4.87{\times}10^{10}kgm^2$. The scale ratio is 1/42.857. The model is realized by aluminum square pipes with the section dimension of $20mm{\times}20mm$. The numbers of longitudinal and transverse pipes are 7 and 35 respectively. Heave motions at selected points are measured with potentiometers and bending moments with strain gages.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.4
• /
• pp.184-190
• /
• 2006

Recently, Lee et al. have proposed an algorithm utilizing the signals from different paths by using bottom mounted simple linear array to estimate 3-D location of oceanic target. But this algorithm assumes that sound velocity is constant along depth of sea. Consequently, serious performance loss is appeared in real oceanic environment that sound speed is changed variously. In this paper, we present a 3-D near field localization algorithm for inhomogeneous sound speed. The proposed algorithm adopt localization function that utilize ray propagation model for multipath environment with linear sound speed profile(SSP), after that, the proposed algorithm searches for the instantaneous azimuth angle, range and depth from the localization cost function. Several simulations using linear SSP and non linear SSP similar to that of real oceans are used to demonstrate the performance of the proposed algorithm. The estimation error in range and depth is decreased by 100m and 50m respectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.19-26
• /
• 2006

This study assessed the accuracies of the ground information extracting methods from the LiDAR data. Especially, it compared two kinds of method, one of them is using directly the raw LiDAR data which is point type vector data and the other is using changed data to DSM type as the normal grid type. The methods using Local Maxima and Entropy methods are applied as a former case, and for the other case, this study applies the method using edge detection with filtering and the generated reference surface by the mean filtering. Then, the accuracy assessment are performed with these results, DEM constructed manually and the error permitted limit in scale of digital map. As a results, each DEM mean errors of methods using edge detection with filtering, reference surface, Local Maxima and Entropy are 0.27m, 2.43m, 0.13m and 0.10m respectively. Hence, the method using entropy presented the highest accuracy. And an accuracy from a method directly using the raw LiDAR data has higher accuracy than the method using changed data to DSM type relatively.

• Tunnel and Underground Space
• /
• v.26 no.5
• /
• pp.348-362
• /
• 2016

This study describes the results of blasting overbreak analysis using the stereo photogrammetry method in an underground mine. For comparing its quantitative measurements, LIDAR system was applied to the test site and blasting overbreak was analyzed for 4 test blasting operations. The difference in values obtained from the two methods showed only 0.81% in volume and 1.05% in area, respectively, therefore authors verify the field applicability of stereo photogrammetry method on underground mine. The volumes of overbreak measured from 4 test blastings were $29.84m^3$, $22.45m^3$, $14.54m^3$ and $5.46m^3$, respectively, in photogrammetry analysis on excavation surface, and it was shown that the volume of overbreak decreases with blasting sequence. From these measurements, it is concluded that the stereo photogrammetry method can describe the underground excavation surface effectively and the its quantitative data can be used for analysis of volume, area and overbreak of excavation zone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.748-755
• /
• 2004

In this paper, the hybrid SC/MRC technique was applied to the MC/DS-CDMA system in the Nakagami-m multi-path fading environment. The applied scheme was compared with other cases when the MRC technique was applied and then performances were analyzed. The result of analysis showed that the performance of the applied system, whose number of branches (L) for the input diversity of each carrier wave was 3 and かme selected number of branches ( Lc) was 2, was better than that of the MRC technique when the Lc of the MRC technique was 2. The performance of the applied system was lower than that of the MRC technique, then the Lc of the MRC technique was 3. However, as the fading index was lowered, which means the telecommunication environment deteriorated, the performance of the hybrid SC/MRC-(2/3) diversity technique when Lc of MRC technique was 3, was almost the same as that of the MRC technique. The hybrid SC/MRC-(2/3) diversity technique shows a similar performance to that of the MRC technique, when the Lc of the MRC technique was 4. Therefore, it was confirmed that the MC/DS-CDMA system could reduce complexity and achieve similar performance to that of the MRC by applying the hybrid SC/MRC technique, which utilized the advantages of the SC technique and high performance of the MRC scheme, rather than the MRC diversity technique that requires bit synchronization, frequency of fading, and phase synchronization for every diversity branch.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.51-57
• /
• 2014

In this paper, we introduce the adaptive threshold detection scheme based on an evolutionary arithmetic algorithm for the M-ary holographic data storage(HDS) system. The genetic algorithm is a particular class of evolutionary arithmetic based on the process of biological evolution, which is a very promising technique for optimization problem and estimation applications. In this study, to improve the detection performance that is degraded by the HDS channel environment and the pixel misalignment, the threshold value was assumed to be a population set of the evolutionary algorithm. The proposed method can find an appropriate population set of bit threshold, which minimizes bit error rate(BER) as increased generation. For performance evaluation, we consider severe misalignment effect in the 4-ary holographic data storage system. Furthermore, we measure the BER performance and compare the proposed methods with the conventional threshold detection scheme, which verifies the superiority of the proposed scheme.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.264-267
• /
• 2005

플럭 형성 비소 오염토양에 대한 토양세척기법의 적용성 실험결과, 세척용액 100 mM과 500 mM의 농도에서 대상 토양에 대한 비소 용출량은 수산화나트륨이 염산보다 높은 효율을 보였으며, 농도 1000 mM의 경우에는 염산이 비교적 우세한 세척효율을 보였다. 토양오염공정시험법에 의한 세척후 토양내 잔류비소 농도의 경우, 염산이 수산화나트륨과 비슷하거나 다소 우세함을 알 수 있었다. 세척 대상 토양의 Cut-off size limit을 선정하여 토양세척시 생성되는 플럭을 제거하지 않고 반복 세척한 결과, 수산화나트륨의 농도 200 mM은 1000 mM에 비하여 잔류된 비소량이 비슷하거나 비교적 높았으며, 2가지 농도에 대하여 총 5회 반복 세척한 토양의 비소 농도는 토양환경보전법의 가지역 우려기준 농도인 6 mg/kg에 근접한 결과를 보였으나, 염산의 경우 총 5회 세척시 비소의 농도가 약 9 mg/kg으로 비소 잔류량이 보다 큼을 알 수 있었다. 플럭을 제거한 후 반복 세척시 수산화나트륨의 농도 1000 mM이 200 mM에 비하여 토양 세척효율이 증가하였으며, 1000 mM로 5회 세척시 잔류비소 농도가 가지역 우려기준 농도에 근접한 약 6.7 mg/kg이었고 염산을 이용하여 세척한 경우에는 3회 세척시 약 6.7 mg/kg 4, 5회 반복 세척시 각각 약 3.9, 3.3 mg/kg으로 가지역 우려기준에 적합한 농도조건이 됨을 알 수 있었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.899-902
• /
• 2008

802.11 무선 LAN에서 MPEG-4 비디오 프레임들을 실시간으로 전송하기 위한 통신 스케쥴링 기법이 제시된다. 제시된 기법은 MPEG-4 비디오 전송시 프레임 크기에 따라 변동되는 작업부하를 효율적으로 처리할 수 있다. 본 연구의 목적은 종료시한 내에 전송되는 프레임의 수를 최대화하면서 종료시한 이후 전송이 완료된 프레임의 지연 시간을 최소화함으로써 실시간적 성능과 서비스 품질을 향상시키는 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1855-1859
• /
• 2009

본 연구에서는 이동시간차 방식(UVM)의 자동유량측정시설의 유량산정방법을 개선하기 위해 수위변동시 유속과 초음파의 신호강도 변화 패턴을 검토하여 불안정한 유속을 제거하는 필터링기법을 적용하였으며, 수위변화에 따른 각 다층의 센서신호 작동에 대한 설정 값을 재조정하였다. 이러한 기법을 적용하여 유량을 재산정한 결과, 평수기 불안정한 변화를 보이던 유량측정결과가 안정화되어 실측치에 비교하였을 때 평수기 측정치는 5%이내, 홍수기 측정결과는 10% 이내로 개선되었다. 유량산정기법 개선 후 1.5m $\sim$ 4.3m 범위의 수위대의 측정결과가 비교적 안정적으로 이루어지고 있으며, 향후 4.3m 이상의 수위의 측정결과에 대한 검토가 필요하다.