In this work, we investigated the spectroscopic properties of $LiY_xSr_yZrO_{3+{\alpha}:Eu^{3+}$, a red emitting nanophosphor based on $SrZrO_3$ perovskite. The synthesis process was an auto-combustion process. X-ray diffractograms show the orthorhombic structure of $SrZrO_3$. Photoluminescence (PL) excitation spectra display a split charge transfer band revealing the presence of two possible sites for the $Eu^{3+}$ ions. The emission spectra at 231 nm excitation illustrate the dominance of the $^5D_0-^7F_1$ transition, which is an indication that the smaller sized $Eu^{3+}$ ions are mostly situated at the more ordered (symmetric) $Sr^{2+}$ sites. The emission spectra at 292 nm & 397 nm excitations show the dominance of $^5D_0-^7F_2$ transition which suggests some of the $Eu^{3+}$ ions are also situated at the distorted $Zr^{4+}$ sites. Both the intensity parameters, asymmetry ratio and the decay lifetimes of the nanophosphors show dependence on $Y^{3+}$ concentration, signifying a modification in the host structure. Maximum quantum efficiency value of ${\approx}46%$ was obtained for the nanophosphors which indicate the need for improvement for practical applications. CIE coordinates show the suitability of this phosphor for both red emission in LED and as a complementary colour for white LED applications.
본 논문에서는 변형된 시간 지연 기법을 이용한 마이크로파 2차 주파수 체배기가 제안되었다. 제안된 주파수 체배기에서는 입력 신호와 지연된 신호 사이에 발생하는 군지연 시간 부정합을 전압 제어 지연 선로(VCDL)를 이용하여 보상하였다. 가변 슈미트 트리거를 이용한 군지연 시간 정합과 신호 파형의 성형(waveform shaping)으로 인해 원하지 않는 기본 주파수($f_0$)와 3, 4차 고조파 성분들이 충분히 제거할 수 있었다. 결과적으로 출력 단자에서는 오직 2 체배된 주파수 성분($2f_0$)만이 우세하게 나타난다 제안된 주파수 체배기는 1.15 GHz의 기본 주파수에서 설계되었고 TSMC 0.18 $\mu m$ 공정을 이용하여 제작되었다. 입력 신호 전력을 0 dBm 인가하였을 때, 2차 체배된 출력 주파수 성분의 측정된 전력은 2.57 dBm이었다. 2차 체배된 주파수 성분에 대해 $f_0,\;3f_0$, 그리고 $4f_0$ 성분의 제거율은 각각 43.65, 38.65, 그리고 35.59 dB이다.
본 연구에서는 실리카원으로 Tetraethyl orthosilicate (TEOS)를 사용하고 주형으로 트리블럭 공중합체(P123)를 사용하여 산성 조건에서 자기조립 방법과 수열합성 과정을 거쳐서 잘 배열된 육방체 구조의 메조세공 배열구조를 가지는 다공성 실리카 물질(Surfactant-extracted SBA-15)을 합성하였다. Surfactant-extracted SBA-15는 약 980 nm의 크기를 가지는 짧은 로드의 입자 모양을 보여주었다. 그리고 표면적과 세공 직경은 각각 730 m2g-1와 70.8 Å이었다. 한편, 포스트-합성방법(post-synthesis method)을 이용하여 메조세공 내에 아미노실란(3-aminopropyltriethoxysilane, APTES)을 그래프팅(grafting) 하였다. 아미노실란으로 개질된 메조다공성 실리카(APTES-SBA-15)는 잘 배열된 세공구조(p6mm)를 가지고 짧은 로드의 입자모양을 잘 유지 하였다. APTES-SBA-15의 표면적과 세공 직경은 각각 350 m2g-1와 60.7 Å으로 감소하였다. APTES가 개질된 메조 다공성 실리카에 희토류 금속이온(Eu3+, Tb3+) 용액을 처리하여 메조세공 내에 희토류 금속 착물이 도입된 메조다공성 실리카 물질을 합성하였다. (Eu/APTES-SBA-15, Tb/APTES- SBA-15) 이들 물질은 λex=250 nm 광에 의해 특징적인 광발광 스펙트라를 나타내었다. (Tb/APTES-SBA-15를 위하여 5D4→7F5 (543.5 nm), 5D4→7F4 (583.5 nm), 5D4→7F3 (620.2 nm) 전이; Eu/APTES-SBA-15를 위하여 5D0→7F0 (577.7 nm), 5D0→7F1 (592.0 nm), 5D0→7F2 (614.9 nm), 5D0→7F3 (650.3 nm) and 5D0→7F4 (698.5 nm) 전이)
우리나라 japonica 벼의 일대잡종을 다양하게 육성할 목적으로 세포질 유전자적 웅성불임인 BTCMS에 대한 임성회복력이 있는 계통 AR-3을 교잡하여 그 F1을 모본으로 하고 조ㆍ중ㆍ만생의 한국 japonica형 벼 4품종씩을 교본 반복친으로 5회 backcross하여 우리나라 벼 품종 배경의 우엉불임 계통과 임성회복계통을 육성하고 이들의 주요 작물학적 특성을 각각의 반복친과 비교한 결과를 요약하면 다음과 같다. 1. 우리나라 japonica형 품종의 배경을 갖는 세포질 유전자적 웅성불임계통을 조ㆍ중ㆍ만생군으로 각각 4개씩 도합 12계통 육성하였으며, 동일한 품종의 배경을 갖는 임성회복계통친도 조ㆍ중ㆍ만생군으로 각각 4개씩 12계통 육성하였다. 2. 육성된 웅성불임계통은 조중군에서 소백벼 A, 오대벼,A, 관악벼A, 대성벼A, 중생군에서 화진벼A, 팔달A, 수원 224A, 이리 386A, 만생군에서 낙동벼A, 팔굉A, 화청벼A 및 밀양 97A 등으로 명명하였다. 3. 육성된 임성회복계통은 조생군에서 소백벼R, 오대벼R, 팔달R, 수원 224R, 이리 386R, 만생군에서 낙동벼R, 팔굉R, 화청벼R 및 밀양 97R 등으로 명명하였다. 4. 육성된 웅성불임계통들은 반복친(불임유지친)에 비하여 간장이 단축되는 경향이었으나 출수기, 수장 및 수량구성요소 등은 대체로 비슷하였다. 5. 육성된 임성회복계통들은 반복친과 비교하면 대체로 간장, 수장, 수량구성요소 및 수량의 차이가 없었다.
This paper aims to provide basic data for work environment control, prevention of worker exposure to asbestos and improvement of air quality to protect workers ‘health after measuring the level of airborne asbestos and workers' exposure in a shipbuilding repair businesses. For this study, a total of 27 samples were collected from 27 workers who had been exposed to asbestos during engine, piping, boiler and other manufacturing processes in 'A' Shipbuilding Repair Company in Gyeongnam. This research was conducted from Oct. 1 to 30, 2007 and had the following results: The target group (27 workers) consisted of all men with an average age of 35.9 years and 6.6 years of work on average. Among them, fifteen 15 (55.6%) were smokers. In terms of their duties at work, there were 12 plumbing repair engineers (44.4%), 8 boiler repair engineers (29.6%) and 7 engine engineers (25.9%). The geometric mean concentration of airborne asbestos was 0.004 f/cc. A total of 4 samples exceeded the exposure limit. In particular, three exceeded the legal limit by more than double, which means that some workers have been highly exposed to asbestos. In terms of the concentration of asbestos fibres by work process, plumbing repair was the highest (0.0071 f/cc($0.001{\sim}0.57\;f/cc$)) while boiler was the lowest (0.0015 f/cc($0.001{\sim}0.007\;f/cc$)). Based on this study, proper action needs to be taken as soon as possible to protect workers from the threat of asbestos.
As the automobile industry is developing, the number of deaths and injuries has increased. To reduce the damages from automobile accidents, the government of each country proposes experimental conditions for reproducing the accident and establishes the vehicle safety regulations. Automotive manufacturers are trying to make safer vehicles by satisfying the requirements. The Hybrid III crash test dummy is a standard Anthropomorphic Test Device (ATD) used for measuring the occupant's injuries in a frontal impact test. Since a real crash test using a vehicle is fairly expensive, a computer simulation using the Finite Element Method (F.E.M.) is widely used. Therefore, a detailed and robust F.E. dummy model is needed to acquire more accurate occupant injury data and behavior during the crash test. To achieve this goal, a detailed F.E. model of the Hybrid III 5th percentile female dummy is constructed by using the reverse engineering technique in this research. A modeling process is proposed to construct the F.E. model. The proposed modeling process starts from disassembling the physical dummy. Computer Aided Design (CAD) geometry data is constructed by three-dimensional (3-D) scanning of the disassembled physical dummy model. Based on the geometry data, finite elements of each part are generated. After mesh generation, each part is assembled with other parts using the joints and rigid connection elements. The developed F.E. model of dummy is simulated based on the FMVSS 572 validation regulations. The results of simulation are compared with the results of physical tests.
The dry etch characteristics of GaAs over both AlGaAs and InGaP in planar inductively coupled $BCl_3$-based plasmas(ICP) with additions of $SF_6$ or $CF_4$ were studied. The additions of flourine gases provided enhanced etch selectivities of GaAs/AlGaAs and GaAs/InGaP. The etch stop reaction involving formation of involatile $AlF_3$ and $InF_3$ (boiling points of etch products: $AlF_3\sim1300^{\circ}C$, $InF_3$ > $1200^{\circ}C$ at atmosphere) were found to be effective under high density inductively coupled plasma condition. Decrease of etch rates of all materials was probably due to strong increase of flourine atoms in the discharge, which blocked the surface of the material against chlorine neutral adsorption. The process parameters were ICP source power (0 - 500 W), RF chuck power (0 - 30 W) and variable gas composition. The process results were characterized in terms of etch rate, selectivities of GaAs over AlGaAs and InGaP, surface morphology, surface roughness and residues after etching.
Purpose: PBA buried in underwater requires high reliability because of its mission critical characteristic and harsh operational environment during its life cycle. Therefore, various reliability improvement activities are necessary. The defect on PBA manufacturing process have been studied, as a result, many activities and standards have been presented. However, there are less studies regarding failure pattern on physical features based on design. In this paper, we studied a possible failure patten based on physical features that is related with manufacturing process of PBA. And reliability improvement design based on PoF (Physical of Failure) were intruduced in this paper. Methods: A reliability prediction simulation were performed on the components A and B of the H system using Sherlock Software which is a PoF commercial tool from DFR solution. Solder fatigue and PTH fatigue analysis based on thermal cycling profiles and random vibration was analyzed on three earthquake response spectrum. Result: It was validated that life time and reliability improvement design through solder fatigue and PTH fatigue analysis in case of component. For compoenet B, random vibration fatigue was additionally analyzed and validated reliability for earthquakes profile. Conclusion: In design stage prior to manufacturing, PoF can be analyzed, and it is possible to make a reliability improvement/validated design using design data. This study can be applied in every design step and contribute to make more stable development product.
치환형 Ba-ferrite의 수소환원 거동은 순수한 Ba-ferrite와는 다르게 나타났다. 환원온도 250 .deg. C에서 520 .deg. C의 범위에서 치환형 Ba-ferrite의 보자력은 증가하다가 다시 감소하는 반면에 순수한 Ba-ferrite는 계속 감소 하였다. 치환형 Ba-ferrite의 환원과정은 환원되는 정도에 따라 3단계로 나뉘어진다. 1과 2단계에서 Ba-ferrite의 구조는 그대로 유지를 하지만 자기적 성질은 다르게 나타났다. 1단계에서 보자력은 증가하고 산화처리시 가역적이지만, 2단계에서는 보자력이 더욱 증가하고 산화처리시 비가역적이었다. 그러나 3단계에서는 Ba-ferrite 구조 자체가 붕괴되어 .alpha. -Fe와 소량의 BaFe $O_{3-x}$의 생성으로 $H_{c}$는 크게 감소하고 포화자화값은 130 emu/g으로 크게 증가하였다. 이 때 보자력 분포도는 크게 넓어지며 입자크기도 감소하였다. 또한 치환이온들은 환원과정에서 Ba-ferrite 구조의 붕괴를 억제하였으며, 2a + 4 $f_{IV}$ , 2b 및 12k 자리의 치환이온들이 4 $f_{VI}$ 와 12k'의 자리로 이동함을 확인하였다. 따라서 1과 2단계에서의 보자력 증가원인은 치환이온의 자리이동에 따른 고보자력 상의 생성 때문이었다.
동일한 양식장에서 생육된 두 미역 품종간의 생장 및 형태적 특성과 이에 따른 양식 생산의 효율성을 1990년 11월부터 1991년 4월까지 매월 2회씩 채집된 자료를 분석하였다. 두 품종의 미역은 완도 지방에서 널리 양식되고 있는 Undaria pinnatifida Sur. f. distans Miyabe and Okamura(북방형)와 일본 산리꾸 지방에서 이식된 U. pinnatifida Sur. f. typica Yendo(남방형) 이었으며, 그 결과는 다음과 같다. 수확기의 평균 체장 및 체중은 북방형의 완도 산은 각각 161.1cm, 1,003.4g이었고, 남방형의 산리꾸 산은 각각 183.5cm, 1,314.6g이었다. 최대 성장 시기는 두 품종 모두 4월 초순으로 그 이후는 생장이 감소되는 경향을 보였으나, 두 품종간의 생장 차는 이 시기에 비교적 컸다. 간미역 가공시 사용되는 가용 부분의 평균 무게는 완도 산이 734.8g, 산리꾸 산이 968.5g이었다. 그리고 체장에 대한 가용부의 길이 비율은 완도 산, 산리꾸 산이 각각$76\%,\;83\%$이었고, 체장에 대한 가용부의 무게 비율은 각각 $43.8\%,\;52.7\%$이었다. 따라서 남방형인 산리꾸 산의 형질이 가용 비율 및 가공 효율 면에서 북방형의 완도 산보다 우수하고, 수익성이 높은 것으로 평가되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.