• Journal of the Korean Electrochemical Society
• /
• v.10 no.3
• /
• pp.184-189
• /
• 2007

The importance of secondary battery industry is getting excited according to the development of battery industry as a high efficiency energy supplier of electronic machine of mobile information such as mobile phone, lap-top computer, PDA. It is rasing the interest about security of safety and high efficiency of cathode material for main part of secondary lithium battery. The cathode material which has been used like $LiCoO_2,\;LiMn_2O_4,\;LiNi_xCo_yMn_zO_2,\;LiNi_xCo_yM_zO_2$ (M=Al, Zr, Mg etc.,) the most typical material is $LiCoO_2$. But it is studying the development of substitute such as efficiency amelioration of $LiCoO_2$, thetiary element, olivine element because of the capacity of $LiCoO_2$, the matter of security; especially the betterment of efficiency, security research of safety has been actively processed in domestic and overseas about surface coating treatment of active cathode which is using oxide ($M_xO_3$). This study analyses side effect of battery according to increase of surface treatment, formation of precipitation for reagent condensation, non-reagent residue of oxide ($M_xO_3$) which is remains during the surface treatment of $LiCoO_2$; conducts study of new process, the consideration of the electrochemical property to improve oxide solution of mixing rate, mixture of surface treatment, dryness, calcinations conditionetc.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.146-156
• /
• 1998

To mitigate excessive noise from highways, and high speed rail road, it is often necessary to construct a noise barrier. Absorptive barroer attenuation solution is obtained for the problem of diffration of a plane wave sound source by a semi-infinite plane. A finite region in the vicinity of the edge has an highly absorbing boundary condition ; the remaining portion of the half plane is rigid. The problem which is solved is a mathematical model for a hard barrier with an absorbing edge. If the wavelength of the sound is much smaller than the length scale associated with the barrier, the diffraction process is governed to all intents and purpose by the solution to a standard problem of diffraction by a semi-infinite hard plane with an absorbent edge. It is concluded that the absorbing material that comprises the edge need only be of the order of a wavelength long to have approximately the same effect, on the sound attenuation in the shadow side of the barrier. Traffic noise is composed of thousands of sources with varying frequency content. To simplify noise predictions when barriers are present, an effective frequency of 550Hz may be used to represent all vehicles. The wavelength of sound at f=550Hz for traffic noise is about 2 feet. According to the above conclusion, an absorptive highway noise barrier is only needed to cover to cover approximately a 2 foot length of absorbing material. It would be more economical to cover only the region in the immediate vicinity of the edge with highly sound obsorbent material.

• Toxicological Research
• /
• v.23 no.4
• /
• pp.321-330
• /
• 2007

Garlic (Allium sativum L.) with the food supplement material and medicine was used traditionally in Asia and Europe. Epidemiological studies revealed that the intake of garlic reduced incidences of various cancer including digestive system. The present study was designed to investigate the effect of garlic ethanol extract on the development of colonic aberrant crypt foci (ACF) induced by 1,2-dimethylhydrazine (DMH) in male F344 rats. Five-week-old rats were given four times for two weeks to subcutaneous injections by DMH (30 mg/kg body weight) to induce ACF. The animals were divided into groups that fed diet containing garlic ethanol extract at five different doses (0.1, 0.2, 0.5, 2, 5%), respectively, animals were evaluated for the total number of ACF and total aberrant crypts (AC) per colon detected from methylene blue-stained rat colon. ACF were formed in animals in DMH-treated group. The feeding suppressed potently the appearance ACF in the colon of rats. Especially, fed diet containing garlic ethanol extract at intermediate dose (0.5%) significantly reduced the number of ACF and AC per colon (p < 0.05). Garlic ethanol extract inhibited DMH-induced overexpression of Activator Protein-1 (AP-1) and ${\beta}-catenin$ genes related to cell proliferation that also upregulated the expression of p21Waf1/Cip1 mRNA, a cell cycle-regulating gene. These results suggested that garlic ethanol extract may inhibit ACF formation, ${\beta}-catenin$ gene as the early preneoplastic marker of malignant potential in the process of colon carcinogenesis.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.5
• /
• pp.25-31
• /
• 2009

A low power SRAM using supply voltage charge recycling (SVCR-SRAM) scheme is proposed. It divides into two SRAM cell blocks and supplies two different powers. A supplied power is $V_{DD}$ and $V_{DD}/2$. The other is $V_{DD}/2$ and GND. When N-bit cells are accessed, the charge used in N/2-bit cells with VDD and $V_{DD}/2$ is recycled in the other N/2-bit cells with $V_{DD}/2$ and GND. The SVCR scheme is used in the power consuming parts which bit line, data bus, word line, and SRAM cells to reduce dynamic power. The other parts of SRAM use $V_{DD}$ and GND to achieve high speed. Also, the SVCR-SRAM results in reducing leakage power of SRAM cells due to the body-effect. A 64K-bit SRAM ($8K{\times}8$bits) is implemented in a $0.18{\mu}m$ CMOS process. It saves 57.4% write power and 27.6% read power at $V_{DD}=1.8V$ and f=50MHz.

• Korean Parent-Child Health Journal
• /
• v.4 no.1
• /
• pp.1-18
• /
• 2001

Fatigue after delivery affect women's birth experience and interrupt the process of labor. Finally woman cannot have a positive birth result and will experience a postpartum fatigue. But researches about fatigue during the labor are lacked. Nurse help adapting a mother's role, bonding with new baby, recovering after birth, and improving woman's quality of life through decreasing fatigue during the labor and intercepting a continued postpartum fatigue. So it is very important that measuring a fatigue and confirming relationships between fatigue and factors affecting fatigue. The purpose of this study was measuring the level of fatigue within 4hours after delivery and identifing factors affecting fatigue. The ultimate goal was to contribute to improving a birth experience and adapting after birth through decreasing the level of fatigue and interventions. The data was collected for this study at the hospital of two universities and the third hospital in Seoul from Aug. 15. to Nov. 10. 2000. The subjects were 106 of mothers who deliveried a normal newborn and were tested within four hours after birth. The instruments were The Visual Analogue Scale for fatigue, The State Anxiety Inventory, and The Labor Support Inventory. The data were analyzed by using percentage, mean, SD, t-test, ANOVA, Pearson correlation. The results of this study were as follows; (1) The level of fatigue during the labor was 61.48point. (2) The deferences according to general and obstetric character affecting fatigue founded that there were Significant differences according to job(t=2.659, p=0.009), and the type of delivery(t=-2.035, p=0.044). (3) The deferences according to factors affecting fatigue revealed that there was significant difference according to quality of sleep(F=2.935, p=0.037). The significant fatigue and the fatigue after delivery was anxiety(r=0.343, p=0.000). The above findings indicate that the level of fatigue during the labor is higher than during pregnancy and postpartum. Woman having a job, delivering by vacuum was more fatigued. The level of fatigue according to a quality of sleep was significant difference. The poor quality of sleep, higher level of fatigue. And the more anxiety after delivery, the more fatigue. So, the variable nursing interventions for lessening the level of fatigue through appling the situation for rest, relaxation during the labor to reserve energy, and decreasing anxiety should be provided for mothers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.362-362
• /
• 2014

Atomic layer deposition (ALD) can be regarded as a special variation of the chemical vapor deposition method for reducing film thickness. ALD is based on sequential self-limiting reactions from the gas phase to produce thin films and over-layers in the nanometer scale with perfect conformality and process controllability. These characteristics make ALD an important film deposition technique for nanoelectronics. Tantalum pentoxide ($Ta_2O_5$) has a number of applications in optics and electronics due to its superior properties, such as thermal and chemical stability, high refractive index (>2.0), low absorption in near-UV to IR regions, and high-k. In particular, the dielectric constant of amorphous $Ta_2O_5$ is typically close to 25. Accordingly, $Ta_2O_5$ has been extensively studied in various electronics such as metal oxide semiconductor field-effect transistors (FET), organic FET, dynamic random access memories (RAM), resistance RAM, etc. In this experiment, the variations of chemical and interfacial state during the growth of $Ta_2O_5$ films on the Si substrate by ALD was investigated using in-situ synchrotron radiation photoemission spectroscopy. A newly synthesized liquid precursor $Ta(N^tBu)(dmamp)_2$ Me was used as the metal precursor, with Ar as a purging gas and $H_2O$ as the oxidant source. The core-level spectra of Si 2p, Ta 4f, and O 1s revealed that Ta suboxide and Si dioxide were formed at the initial stages of $Ta_2O_5$ growth. However, the Ta suboxide states almost disappeared as the ALD cycles progressed. Consequently, the $Ta^{5+}$ state, which corresponds with the stoichiometric $Ta_2O_5$, only appeared after 4.0 cycles. Additionally, tantalum silicide was not detected at the interfacial states between $Ta_2O_5$ and Si. The measured valence band offset value between $Ta_2O_5$ and the Si substrate was 3.08 eV after 2.5 cycles.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.30-38
• /
• 2017

Recently, research on the development of a composite slab system for shorting the construction period by simplifying the process by omitting the form work and the reinforcement placing is underway. The purpose of this study is to evaluate the long-term behavior of a simplified slab system that replaces the form work and tensile reinforcement using structural deck-plate and replaces the temperature reinforcement using steel fiber reinforced concrete. In the conventional composite deck-plate slab method, w.w.f is generally used for crack control by drying shrinkage. But previous research results by various researchers were pointed out it is not effective to control the shrinkage and temperature cracking. In this study, the long-term cracking and structural behavior of steel fiber reinforced deck plate slab specimen with two continuous spans constructed under typical load conditions were evaluated. Experimental results showed that the number and width of long-term cracks decreased remarkably in the simplified slab specimen, and the deflection was also decreased compared with conventional RC slab specimen. However, in the continuous end of the slab where the negative moment is applied, it is analyzed that reinforced details are necessary to control the crack width in the service load and to recover deflection at load removal.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.517-524
• /
• 2003

There have been worldwide research and development efforts to automate various processes of bio-production and those efforts will be expanded with priority given to tasks which require high intensive labor or produce high value-added product and tasks under hostile environment. In the field of bio-production capabilities of the versatility and robustness of automated system have been major bottlenecks along with economical efficiency. This paper introduces a new concept of automation based on tole-operation, which can provide solutions to overcome inherent difficulties in automating bio-production processes. Operator(farmer), computer, and automatic machinery share their roles utilizing their maximum merits to accomplish given tasks successfully. Among processes of greenhouse watermelon cultivation tasks such as pruning, watering, pesticide application, and harvest with loading were chosen based on the required labor intensiveness and functional similarities to realize the proposed concept. The developed system was composed of 5 major hardware modules such as wireless remote monitoring and task control module, wireless remote image acquisition and data transmission module, gantry system equipped with 4 d.o.f. Cartesian type robotic manipulator, exchangeable modular type end-effectors, and guided watermelon loading and storage module. The system was operated through the graphic user interface using touch screen monitor and wireless data communication among operator, computer, and machine. The proposed system showed practical and feasible way of automation in the field of volatile bio-production process.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.339-355
• /
• 1993

The purpose of this correlational study was to offer strategies for nursing intervention to improve compliance with prenatal care. This study was designed to investigate degree of tardiness, correlation between hardiness and compliance with prenatal care. In research, the characteristic of hardiness has 1 teen demonstrated in resolving stressful situaltions and in adapting to overcome physical and psycho-logical tension. pregnancy is normal crisis process. Therefore, it is necessary to investigate degree of hardiness in normal pregnant woman and I think that concept of hardiness is able to become a new, important concept for prenatal care imtervention. The subjects were 388 normal pregnant woman over five months, who were selected from five university hospitals and two health centers in Taegu. Data were obtained using a convenience sample technique. Data collection was done from March 6 to June 18, 1992. The instruments used for this study were the Health Related Hardiness Scale developed by Pollock(1984) and compliance with a prenatal care scale developed by the author on the basis of results of a literature review. Data were analyzed using the SAS program for t - test, ANOVA, Scheffe test, Pearson correlation and stepwise multiple regression. The results are as follows : 1. The scores on the hardiness scale ranged from 35 to 210 with mean of 88.89. 2. The scores on the compliance with prenatal care scale ranged from 28 to 140 with a mean of 111.49. 3. There were significant differences between hardiness and obstetrical characteristic factors, duration of pregnancy, frequency of pregnancy, frequency of abortion(P .05). 4. There were significant differences between compliance with prenatal care and general and obstetircal characteristic factors, education and frequency of pregnancy(P .05). 5. Correlations between hardiness and compliance with prenatal care were all negative and significant(r=-.2276~ -.2930, P .000). Challenge of hardiness components was the low est (r= -.2814). 6. Significant differences between hardiness and compliance with prenatal care by group were as follows : Group 1 was the high est, whereas Group 8 was the lowest(F=5.47, P .0000). 7. Factors influencing compliance with prenatal care were : 1) Challenge was the main variable and accounted for 7.92% of the total variance. 2) Education and frequency of pregnancy accounted for an additional 2.74% of the total variance. From the above findings, this study suggests the following : 1) Considering the lack of empirical support, the theroy of hardiness needs to be evaluated. 2) A valid, reliable and culturally appropriate instrument needs to be developed for Health Related Hardiness Scale. 3) There is a need for further study of hardiness in a broad variety of populations. 4) There is a need for comparative study correlation between hardiness and compliance with prenatal care in woman with normal and abnormal pregnancies

• Journal of Neurogastroenterology and Motility
• /
• v.25 no.3
• /
• pp.343-362
• /
• 2019

Background/Aims There has been major progress in our understanding of the irritable bowel syndrome (IBS), and novel treatment classes have emerged. The Rome IV guidelines were published in 2016 and together with the growing body of Asian data on IBS, we felt it is timely to update the Asian IBS Consensus. Methods Key opinion leaders from Asian countries were organized into 4 teams to review 4 themes: symptoms and epidemiology, pathophysiology, diagnosis and investigations, and lifestyle modifications and treatments. The consensus development process was carried out by using a modified Delphi method. Results Thirty-seven statements were developed. Asian data substantiate the current global viewpoint that IBS is a disorder of gut-brain interaction. Socio-cultural and environmental factors in Asia appear to influence the greater overlap between IBS and upper gastrointestinal symptoms. New classes of treatments comprising low fermentable oligo-, di-, monosacharides, and polyols diet, probiotics, non-absorbable antibiotics, and secretagogues have good evidence base for their efficacy. Conclusions Our consensus is that all patients with functional gastrointestinal disorders should be evaluated comprehensively with a view to holistic management. Physicians should be encouraged to take a positive attitude to the treatment outcomes for IBS patients.