• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권1호
• /
• pp.20-30
• /
• 2001

A 1.8V $650{\;}\textrm{mm}^2$ 4Gb DRAM having $0.10{\;}\mu\textrm{m}^2$ cell size has been successfully developed using 0.11 $\mu\textrm{m}$DRAM technology. Considering manufactur-ability, we have focused on developing patterning technology using KrF lithography that makes $0.11{\;}\mu\textrm{m}$ DRAM technology possible. Furthermore, we developed novel DRAM technologies, which will have strong influence on the future DRAM integration. These are novel oxide gap-filling, W-bit line with stud contact for borderless metal contact, line-type storage node self-aligned contact (SAC), mechanically stable metal-insulator-silicon (MIS) capacitor and CVD Al process for metal inter-connections. In addition, 80 nm array transistor and sub-80 nm memory cell contact are also developed for high functional yield as well as chip performance. Many issues which large sized chip often faces are solved by novel design approaches such as skew minimizing technique, gain control pre-sensing scheme and bit line calibration scheme.

• 한국응용과학기술학회지
• /
• 제32권4호
• /
• pp.718-723
• /
• 2015

For the fabrication of the Si negative electrode in Li-ion batteries (LIBs) containing the cross-linking polymer binder, in this work, the urethane acrylate (UA) oligomer was synthesized via a simple synthetic process. The cross-linked poly(urethane acrylate) (CPUA)/carbone black (CB)/Si composite (CPUA/CB/Si composite) was fabricated through reactions between their reactive vinyl segments in the UA oligomer. Interestingly, the CPUA/CB/Si composite showed better cycle performance than the poly(vinylidene fluoride) (PVdF)/CB/Si composite (PVdF/CB/Si composite) and the polyurethane (PU)/CB/Si composite (PU/CB/Si composite). The CPUA/CB/Si composite had the best lithiation of about $2586mAh\;g^{-1}$. The UA oligomer showed a good compatibility with the electrode materials and current collector after and before a curing process.

• ETRI Journal
• /
• 제31권6호
• /
• pp.755-764
• /
• 2009

This paper presents a switched self-biasing and a tail current-shaping technique to suppress the 1/f noise from a tail current source in differential cross-coupled inductance-capacitance (LC) voltage-controlled oscillators (VCOs). The proposed LC VCO has an amplitude control characteristic due to the creation of negative feedback for the oscillation waveform amplitude. It is fabricated using a 0.13 ${\mu}m$ CMOS process. The measured phase noise is -117 dBc/Hz at a 1 MHz offset from a 4.85 GHz carrier frequency, while it draws 6.5 mA from a 0.6 V supply voltage. For frequency tuning, process variation, and temperature change, the amplitude change rate of the oscillation waveform in the proposed VCO is 2.1 to 3.2 times smaller than that of an existing VCO with a fixed bias. The measured amplitude change rate of the oscillation waveform for frequency tuning from 4.55 GHz to 5.04 GHz is 131 pV/Hz.

• 한국환경과학회지
• /
• 제10권6호
• /
• pp.401-405
• /
• 2001

For the purpose of developing a new process f3r the elimination of oil components from oily waste water, experimental researches using oil gelling agent were performed. The process is composed of three units, that is, decantator, gelling column and adsorption column. 10g of gelling agent in the gelling column could effectively absorb 15.65g of oil from ship washing waste water and 16.93g of oil from steel industry waste water. COD in waste waters dramatically diminished not in the gelling column but in the adsorption column. The .gelling is hindered by other organic components in waste water, and the optimum space time f3r the gelling column Is 20min. 1g of gelling agent absorbed 3.7-4.0g of oil from waste waters with 25 min in the batch operation.

• 대한수학회논문집
• /
• 제9권4호
• /
• pp.961-973
• /
• 1994

A stochastics process $X = {X(t) : t \in T}$, with an index set T, is said to be infinitely divisible (ID) if its finite dimensional distributions are all ID. An ID process X is said to be a stochastic integral process if $X = {X(t) : t \in T} =^D {\int f_td\Lambda : t \in T}$ where $f : T \times S \to R$ is a deterministic function and $\Lambda$ is an ID random measure on a $\delta$-ring S of subsets of an arbitrary non-empty set S with the property; there exists an increasing sequence ${S_n}$ of sets in S with $U_n S_n = S$. Here $=^D$ denotes equality in all finite dimensional distributions.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1061-1066
• /
• 2006

This paper presents the electrical characteristics with manufacturing process and performance evaluation of high performance zinc oxide varistors. ZnO varistors were fabricated with typical ceramic production methods with different thickness and the structural and electrical characteristics of ZnO varistors were investigated. All varistors exhibited high density, which was in the range of $5.41{\sim}5.49g/cm^3$. In the electrical properties, the reference voltage increased in the range of $4.410{\sim}5.250kV$ with increasing their thickness and the residual voltage exhibited the same trends as the reference voltage. In the long duration current impulse withstand test, E-2 and F-1 samples failed at the two and four shots of impulse current, respectively, but E-1 and F-2 samples survived 18 shots during the test. Before and after this test, the variation ratio of residual voltage of E-1 and F-2 samples were -0.34 % and 0.05 %, respectively, which were in the acceptance range of 5 %. According to the results of tests, it is thought that if the fabrication process such as insulating coating, sintering condition, and soldering method is improved, these ZnO varistors would be possible to apply to the station class arresters in the near future.

• 한국인터넷방송통신학회논문지
• /
• 제14권4호
• /
• pp.243-250
• /
• 2014

본 논문은 이차 발전비용 함수를 적용하는 경제급전의 최적화 문제에 대한 균형-교환 최적화 알고리즘을 제안하였다. 제안된 알고리즘은 초기치 $P_i{\leftarrow}P_i^{max}$, (${\Sigma}P_i^{max}$ > $P_d$)에 대해 ${\Sigma}P_i=P_d$일 때까지 $_{max}\{F(P_i)-F(P_i-{\alpha})\}$, ${\alpha}=_{min}(P_i-P_i^{min})$인 발전기 i의 출력량을 $P_i{\leftarrow}P_i-{\alpha}$로 균형과정을 수행하고, 교환과정은 $_{max}\{F(P_i)-F(P_i-{\beta})\}$ > $_{min}\{F(P_i+{{\beta})-F(P_j)\}$, $i{\neq}j$, ${\beta}$ = 1.0, 0.1, 0.1, 0.01, 0.001에 대해 $P_i{\leftarrow}P_i-{\beta}$, $P_j{\leftarrow}P_j+{\beta}$로 수행하였다. 제안된 방법을 15, 20과 38-발전기 사례에 적용한 결과 간단하면서도 항상 동일한 결과로 가장 좋은 결과를 나타내었다. 또한, 73-발전기를 통합하여 경제급전을 수행한 결과 독립적으로 운영하는 경우에 비해 발전비용을 현저히 절약할 수 있음을 보였다.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2336-2347
• /
• 2018

The azeotrope of methyl acetate methanol and water was isolated using extractive distillation with water as entrainer. The pressure-swing extractive distillation (PSED) process and vapor side-stream distillation column (VSDC) with the rectifier process were designed to separate the methyl acetate, methanol and water mixture. It was revealed that the VSDC with the rectifier process had a reduction in energy consumption than the PSED process. Four control schemes of the two process were investigated: Double temperature control scheme (CS1), $Q_R/F$ feedforward control of reboiler duty scheme for PESD (CS2), $Q_R/F$ feedback control scheme for VSDC (CS3), the feedback control scheme of sensitive plate temperature of side-drawing distillation column to dominate the compressor shaft speed (CS4). Feed flow and composition disturbance were used to evaluate the dynamic performance. As a result, CS4 is a preferable choice for separation of methyl acetate-methanol-water mixture. A control scheme combining the operating parameters of dynamic equipment with the control indicators of static equipment was proposed in this paper. It means using the sensitive plate temperature of side-drawing column to control the compressor shaft speed. This is a new control scheme for extractive distillation.

• 대한화학회지
• /
• 제37권8호
• /
• pp.765-772
• /
• 1993

Flux인 $K_2MoO_4$와 섬유원료물질인 $K_2CO_3,\;TiO_2$를 혼합하고 1150$^{\circ}C$에서 용융시킨 다음 950$^{\circ}C$까지 서냉하여(서냉속도=5$^{\circ}C$/h) 층상구조를 갖는 사티탄산칼륨($K_2Ti_4O_9$)과 육티탄산칼륨($K_2Ti_6O_{13}$) 섬유를 합성하였다. Flux(F)와 출발원료물질(R)의 혼합비에 따른 최적 섬유성장 조건을 조사하기 위하여 F:R을 변화시키면서 반응시킨 결과 섬유의 결정상 및 성장속도가 F:R의 비에 크게 의존함을 알 수 있었으며 본 실험조건에서는 사티탄산칼륨과 육티탄산칼륨 모두 F:R=7:3 일 때 섬유의 성장이 가장 양호하였다. F:R = 7:3이고, 출발조성이 $K_2O{\cdot}4TiO_2$인 경우 생성물은 $K_2Ti_4O_9$과 약간의 $K_2Ti_6O_{13}$의 혼합상이 얻어졌으며 평균 섬유 길이는 ${\thickapprox}$ 4 mm 정도의 비교적 장섬유를 얻을 수 있었다. $K_2O{\cdot}6TiO_2$ 조성인 경우도 $K_2Ti_4O_9$의 혼합상이 형성되었고 섬유의 평균길이는 ${\thickapprox}$ 2 mm 정도임을 관찰할 수 있었다.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.175-183
• /
• 2008

흡착제 Li-X 제올라이트(UOP)에서 $CO_2$, CO, $CH_4$, $H_2$에 대한 단일성분 및 혼합성분의 흡착평형 실험을 정적부피법에 의해 수행하였다. 실험 데이터는 압력범위 0~20 bar와 온도범위 293.15 K, 303.15 K, 313.15 K에서 실시하였다. 각각 등온식의 파라미터들은 단일성분 실험을 통해 결정했고, 결정한 파라미터로 혼합성분의 흡착 평형을 예측하였으며 실험값과 비교하였다. Li-X 제올라이트에서의 $H_2/CO_2$, $H_2/CO$, $H_2/CH_4$ 혼합성분의 흡착평형 실험 결과는 extended langmuir-freundlich(L-F) 등온식, dual-site langmuir(DSL) 등온식을 이용해 예측하였으며 실험값과 비교하였다. L-F 등온식은 다른 모델들에 비해 $CH_4$와 $H_2$에서 좋은 예측 결과를 보여주었다. 또한 DSL 등온 식은 $CO_2$와 CO에서 좋은 예측 결과를 보여주었다.