• Ecology and Resilient Infrastructure
• /
• v.9 no.2
• /
• pp.93-99
• /
• 2022

It was confirmed that the fish diversity decreased with increasing index of weir's density (IWD) in the four river systems. The IWD showed difference with watershed, it was high in the Nakdong River (NDR). Both two river systems of Gum River (GUR) and Yeongsan River (YSR) were similar, whereas relatively lower density observed in the Han River (HNR) system. A result of 2-Dimensional Kolmogorov-Smirnov (2-DKS) as a nonparametic test showed different threshold values affecting fish diversity with the river systems. The p-values based on D_max, were significantly different at 0.05 level (except for YSR). The threshold values affecting fish diversity were also different with watershed. The values were 1.6/km of the HNR, 1.3/km of the NDR, and 2.3/km of the GUR, respectively. The fish diversity was decreased when IWD is over threshold values. The IWD of total 404 rivers (about 33%) among 1,217 surveyed in this study showed above threshold value. These rivers should be considered first for evaluating river continuity. The IWD and threshold value suggested in this study would be useful for selecting a stream priority for river connectivity study.

• Progress in Medical Physics
• /
• v.23 no.2
• /
• pp.81-90
• /
• 2012

The effect of setup uncertainties on CTV dose and the correlation between setup uncertainties and setup margin were evaluated by Monte Carlo based numerical simulation. Patient specific information of IMRT treatment plan for rectal cancer designed on the VARIAN Eclipse planning system was utilized for the Monte Carlo simulation program including the planned dose distribution and tumor volume information of a rectal cancer patient. The simulation program was developed for the purpose of the study on Linux environment using open source packages, GNU C++ and ROOT data analysis framework. All misalignments of patient setup were assumed to follow the central limit theorem. Thus systematic and random errors were generated according to the gaussian statistics with a given standard deviation as simulation input parameter. After the setup error simulations, the change of dose in CTV volume was analyzed with the simulation result. In order to verify the conventional margin recipe, the correlation between setup error and setup margin was compared with the margin formula developed on three dimensional conformal radiation therapy. The simulation was performed total 2,000 times for each simulation input of systematic and random errors independently. The size of standard deviation for generating patient setup errors was changed from 1 mm to 10 mm with 1 mm step. In case for the systematic error the minimum dose on CTV $D_{min}^{stat{\cdot}}$ was decreased from 100.4 to 72.50% and the mean dose $\bar{D}_{syst{\cdot}}$ was decreased from 100.45% to 97.88%. However the standard deviation of dose distribution in CTV volume was increased from 0.02% to 3.33%. The effect of random error gave the same result of a reduction of mean and minimum dose to CTV volume. It was found that the minimum dose on CTV volume $D_{min}^{rand{\cdot}}$ was reduced from 100.45% to 94.80% and the mean dose to CTV $\bar{D}_{rand{\cdot}}$ was decreased from 100.46% to 97.87%. Like systematic error, the standard deviation of CTV dose ${\Delta}D_{rand}$ was increased from 0.01% to 0.63%. After calculating a size of margin for each systematic and random error the "population ratio" was introduced and applied to verify margin recipe. It was found that the conventional margin formula satisfy margin object on IMRT treatment for rectal cancer. It is considered that the developed Monte-carlo based simulation program might be useful to study for patient setup error and dose coverage in CTV volume due to variations of margin size and setup error.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.985-992
• /
• 2016

Objective of the study is to evaluate volumetric and dosimetric alterations taking place during radiotherapy for locally advanced head and neck cancer (LAHNC) and to assess benefit of replanning in them. Materials and Methods: Thirty patients with LAHNC fulfilling the inclusion and exclusion criteria were enrolled in a prospective study. Planning scans were acquired both pre-treatment and after 20 fractions (mid-course) of radiotherapy. Single plan (OPLAN) based on initial CT scan was generated and executed for entire treatment course. Beam configuration of OPLAN was applied to anatomy of interim scan and a hybrid plan (HPLAN30) was generated. Adaptive replanning (RPLAN30) for remaining fractions was done and dose distribution with and without replanning compared for remaining fractions. Results: Substantial shrinkage of target volume (TV) and parotids after 4 weeks of radiotherapy was reported (p<0.05). No significant difference between planned and delivered doses was seen for remaining fractions. Hybrid plans showed increase in delivered dose to spinal cord and parotids for remaining fractions. Interim replanning improved homogeneity of treatment plan and significantly reduced doses to cord (Dmax, D2% and D1%) and ipsilateral parotid (D33%, D50% and D66%) (p<0.05). Conclusions: Use of one or two mid-treatment CT scans and replanning provides greater normal tissue sparing along with improved TV coverage.

• Journal of Hydrogen and New Energy
• /
• v.20 no.1
• /
• pp.22-30
• /
• 2009

Energy environment has been changing rapidly such as the fluctuation of oil prices and the effect on UNFCCC. Oil price change affects Korea's economy heavily due to her poor natural resources and large dependence of consumed energy resources. Korea takes the 4th place of importing the crude oil and 9th place in $CO_2$ emissions with the 1st place of $CO_2$ emissions increasing rate. Considering the current statue of Korea including oil price change and UNFCCC, Korea will be expected to be the Annex I nation due to Korean energy environments and the quantity of $CO_2$ emission. Energy technology development is a crucial key to cope with Korea's national energy security and environments. In this study, we establish the framework, which allocates the relative weights of assessment criteria and sub-criteria, for assessing and selecting R&D programs of energy technologies strategically. We integrated fuzzy theory and analytic hierarchy process (AHP) approach since the fuzzy AHP approach reflects the vagueness of human thoughts and perception effectively as making pairwise comparisons of criteria and alternatives. The fundamental data of this research results will support R&D planning phase for policy-makers and the production of well focused R&D outcomes.

• Journal of Technology Innovation
• /
• v.2 no.1
• /
• pp.170-190
• /
• 1994

The importantce of a development of competitiveness in domestic construction industry is growing as some of domestic construction markets is scheduled to open to foreign competing firms with higher level of construction technology and management. A national level of competitiveness in domestic construction industry and firms are partially, but significantly, affected by a technology level and a characteristics of production pattern. The purpose of the study is mainly to analyze and identify a technology level, production pattern and a development stage of R&D activities of domestic construction industry and firms. Based on these findings the study draws on a concluding remarks and derives technology policy implications. Results of analysis in the study impliy that (1) competitiveness of domestic construction firms(industry) in terms of technology level is relatively weak as compare to that of advanced foreign competing firms, (2) degrees of substitution of capital for labor are seemed to be relatively high, (3) R&D (investment) activities of domestic construction firms are generally spread out in forms of import, adjustment and betterment, and (4) only a small number of big domestic construction firms are seemed to afford to R&D investment for research facilities and equipments, but not enough for higher level of R&D man-power. The study suggests that technology policy for construction industry should be based on a fundamental policy directions. For example the increase in size and heightened quality level of R&D man-power should be placed in a top priority in policy agenda. Sound and specific policy items should be developed for planning and design, and maintenace and inspection technology in order to lead domestic industry to compete with foreign firms with full strength.

• Journal of Ocean Engineering and Technology
• /
• v.38 no.4
• /
• pp.187-198
• /
• 2024

Autonomous underwater vehicles (AUVs) have a limited bandwidth for real-time communication, limiting rapid responses to unexpected obstacles. This study addressed how AUVs can navigate to a target without a pre-existing obstacle map by generating one in real-time and avoiding obstacles. This paper proposes using forward-looking sonar with an occupancy grid map (OGM) for real-time obstacle mapping and a potential field algorithm for avoiding obstacles. The OGM segments the map into grids, updating the obstacle probability of each cell for precise, quick mapping. The potential field algorithm attracts the AUV towards the target and uses repulsive forces from obstacles for path planning, enhancing computational efficiency in a dynamic environment. Experiments were conducted in coastal waters with obstacles to verify the real-time obstacle mapping and avoidance algorithm. Despite the high noise in sonar data, the experimental results confirmed effective obstacle mapping and avoidance. The OGM-based potential field algorithm was computationally efficient, suitable for single-board computers, and demonstrated proper parameter adjustments through two distinct scenarios. The experiments also identified some of challenges, such as dynamic changes in detection rates, propulsion bubbles, and changes in repulsive forces caused by sudden obstacles. An enhanced algorithm to address these issues is currently under development.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.119-120
• /
• 2002

The aim is to urge the need of elaborate commissioning of 3D RTP system from the firsthand experience. A 3D RTP system requires so much data such as beam data and patient data. Most data of radiation beam are directly transferred from a 3D dose scanning system, and some other data are input by editing. In the process inputting parameters and/or data, no error should occur. For RTP system using algorithm-bas ed-on beam-modeling, careless beam-data processing could also cause the treatment error. Beam data of 3 different qualities of photon from two linear accelerators, patient data and calculated results were commissioned. For PDD, the doses by Clarkson, convolution, superposition and fast superposition methods at 10 cm for 10${\times}$10 cm field, 100 cm SSD were compared with the measured. An error in the SCD for one quality was input by the service engineer. Whole SCD defined by a physicist is SAD plus d$\sub$max/, the value was just SAD. That resulted in increase of MU by 100${\times}$((1_d$\sub$max//SAD)$^2$-1)%. For 10${\times}$10 cm open field, 1 m SSD and at 10 cm depth in uniform medium of relative electron density (RED) 1, PDDs for 4 algorithms of dose calculation, Clarkson, convolution, superposition and fast-superposition, were compared with the measured. The calculated PDD were similar to the measured. For 10${\times}$10 cm open field, 1 m SSD and at 10 cm depth with 5 cm thick inhomogeneity of RED 0.2 under 2 cm thick RED 1 medium, PDDs for 4 algorithms were compared. PDDs ranged from 72.2% to 77.0% for 4 MV X-ray and from 90.9% to 95.6% for 6 MV X-ray. PDDs were of maximum for convolution and of minimum for superposition. For 15${\times}$15 cm symmetric wedged field, wedge factor was not constant for calculation mode, even though same geometry. The reason is that their wedge factor is considering beam hardness and ray path. Their definition requires their users to change the concept of wedge factor. RTP user should elaborately review beam data and calculation algorithm in commissioning.

• Informatization Policy
• /
• v.26 no.3
• /
• pp.69-89
• /
• 2019

In order to implement smart cities that will become living spaces in the fourth industrial revolution era, detailed privacy information such as residents' living information, buildings and facilities information must be collected and processed in real time. While city functions and convenience for individuals are being facilitated, threats to personal information exposure and leakage are also likely to increase at the same time. Therefore, the design concept for personal information protection should be considered and accordingly reflected from the stages of smart city design, technology development and operation planning of intelligent information (AI) facilities. The results of the analysis show that for activation of smart cities and operation of data-driven cities, the concept of Privacy by Design (PbD) has already been introduced in the institutional, industrial and technological aspects, particularly in the cases of European countries and the US. In order to strengthen the local and global competitiveness of smart cities and the country, Korea also needs to actively deploy PbD as a strategy to secure a data-driven economy, which is the core strategy for smart cities. Therefore, the study suggests policy implications focused on approaches to legislative improvement and technology development support, which reflect the basic properties of PbD as defined in the study.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.4
• /
• pp.157-165
• /
• 2015

The purpose of this study is on identifying charactreistics and management direction of complementary pond of Dalmaji village in Gangjin. Accordingly, this village was indicated as Experience and Resort village by Korean government. This study describes the construction background and characteristics and identifies species diversity and characteristics through field survey. For this, literature and field survey was performed. In field survey, vegetational survey was performed in Aug. of 2015. D(Dominant degree) and S(Sociability degree) was measured by Brown-Blanquet's method. The answer was searched from Myungsanron(明山論), a textbook of Fengsui(風水) in Joseon dynasty. Of these causes, it was considered that the representative one is a protection of fire and infectious disease because the Wolgak mountain is a fire mountain(火山) as a stone mountain in Fengsui. The results demonstrate decline of aquatic ecosystem because of neglect management. The total number of species was 24. Of the species, Zelkova serrata is a natural vegetation of this complementary forest. This is nominated as Lagerstroemia indica and Camellia japonica community. Species composition demonstrate the characteristics of Korean southern region as mixed forest of evergreen trees and deciduous ones which are indigenous plants. It was considered Juniperus chinensis KaizukaVariega in central round island was planted in Japanese colonial period and it have to be removed. It was considered that name of moon pond and moon island etc. projects the mind of village ancestors which are going to reach an ideal condition of moon. And management of quantity and depth of pond water was critical for restoration of disappearing lotus from related literature. Periodic management was needed for ecological structure and function improvement because of ecological disturbance by the invasive plants like Humulus japonicus.

• Journal of Fashion Business
• /
• v.19 no.4
• /
• pp.183-199
• /
• 2015

This study aimed to systematize the apparel vendor work processes and provide useful information to future employees of clothing export units by analyzing the processes of vendors' manufacturing tasks. A survey of 20 apparel vendors servicing mainly U.S. buyers was conducted on employees of overseas business departments working for more than five years. buyers. Based on the results, vendors mainly manufactured cut-and-sew knit products. Regarding the production method, OEM was used more frequently than ODM. Fourteen (70%) companies used the ODM method. This suggests that vendors are expanding their production method from OEM to ODM. In order to summarize the work of each business based on the clothing production process research results, buyers were in charge of planning products and the vendors were in charge of sampling. Production of materials and the approval of material tests were out sourced. Overseas factories of vendors were in charge of bulk (mass) production and garment finishing, as well as packaging and shipping the completed products. Even though the vendors' head offices do not directly produce clothes, they play a pivotal role in ensuring planning and management progress in clothing production. As buyers prefer direct contracts for cost reduction, the vendor additionally performs the role of an agent. Also, with the increase in ODM production ratio, the work area of the vendor is expanding. If Korean clothing exporters improve their global competitiveness by investing in the R&D of materials and design to enhance the ODM method, the development of Korea's clothing and export industry will benefit significantly.