• Journal of Preventive Medicine and Public Health
• /
• v.38 no.4
• /
• pp.386-390
• /
• 2005

Influenza A viruses periodicall y cause worldwide epidemics, or pandemics, with high rates of illness and death. A pandemic can occur at any time, with the potential to cause serious illness, death and social and economic disruption throughout the world. Historic evidence suggests that pandemics occurred three to four times per century. In the last century there were three influenza pandemics. The circumstances still exist for a new influenza virus with pandemic potential to emerge an d spread. The unpredictability of the timing of the next pandemic is underlined by the occurrence of several large outbreaks of highly pathogenic avian influenza since the early 1980s. In 1999, the World Health Organization published the Influenza pandemic plan. The role of WHO and guidelines for national and regional planning. And in 2005, WHO revised the global influenza preparedness plan for new national measures before and during pandemics. This document outlines briefly the Korean Centers for Disease Control's plan for responding to an influenza pandemic. According to the new pandemic phases of WHO, we set up the 4 national levels of preparedness and made guidelines for preventing and control the epidemics in each phase. And also we described the future plans to antiviral stockpiles and pandemic vaccine development.

• International Journal of Contents
• /
• v.13 no.4
• /
• pp.47-62
• /
• 2017

This paper analyzes how much the gap existed between the public group and expert group using future issues and future core technologies that are announced in government institutions based on ontology. We calculated gap with two groups' point of view, one is expert groups' ideas that are based on future hopeful technologies documents, and another is public people ideas that are based on documents of contest that is hosted by 'Ministry of Science, ICT and Future Planning (MSIP)', and 'Institute for Information & communications Technology Promotion (IITP)'. For calculating these, we suggested SDGM model. In the case of ETRI Meta-trend ICT Field, there is a little gap between expert group and public group, and another case that is XT (ETRI determined future technologies excluding ICT field) Field, the gap is increasing annually. Moreover, in the case of all ETRI Meta trend, the gap is bigger than ICT and XT field. We analyzed, also, KEIT's future issues for generalizing this model. The gap existed between two groups. Utilizing SDGM model of this paper, people can interpret easily how much the gap exists between future technologies and issues that are announced in institutions.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.4
• /
• pp.89-97
• /
• 2018

This is a comparative study on the policy of Korea and Japan for improving upland farming mechanization. Purpose of the study is to set a policy direction of improving efficiency of farm management by using agricultural machinery. Research topic is the agricultural mechanization policy at the national level. The research attempts to classify mechanization policies into framework plan, R&D, rent and lease program, upland farm promotion policies. Major features of the comparative analysis are followed. First, there is a similarity between policies of Korea and Japan in terms of the aim of framework plan and other policies settings. However, Japanese policies focus more on the joint management of farming than Korean policies. Japanese policies take an entire system covering from farm to market into account. Second, Japanese policies have much attention to the agricultural organizations such as corporate, cooperatives that are eligible for using agricultural machinery. This is different from Korean policy. Thus, upland farming mechanization policy needs to set priority, and to have systemic approach. Also, upland farming mechanization policy has to be facilitated in accordance with producer organizations and their marketing strategies.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.390-395
• /
• 2004

The iSTMS is a web-based integrated information system supporting Pre-Service and In-Service Inspection(PSI/ISI) processes for the nuclear power plants of KHNP(Korea Hydro & Nuclear Power Co. Ltd.). The system provides a full spectrum coverage of the inspection processes from the planning stage to the final report of examination in accordance with applicable codes, standards, and regulatory requirements. The major functions of the system includes the inspection planning, examination, reporting, project control and status reporting, resource management as well as objects search and navigation. The system also provides two dimensional or three dimensional visualization interface to identify the location and geometry of components and weld areas subject to examination in collaboration with database applications. The iSIMS is implemented with commercial software packages such as database management system, 2-D and 3-D visualization tool, etc., which provide open, updated and verified foundations. This paper describes the key functions and the technologies for the implementation of the iSIMS.

• Radiation Oncology Journal
• /
• v.36 no.3
• /
• pp.241-247
• /
• 2018

Purpose: A hybrid-dynamic conformal arc therapy (HDCAT) technique consisting of a single half-rotated dynamic conformal arc beam and static field-in-field beams in two directions was designed and evaluated in terms of dosimetric benefits for radiotherapy of lung cancer. Materials and Methods: This planning study was performed in 20 lung cancer cases treated with the VERO system (BrainLAB AG, Feldkirchen, Germany). Dosimetric parameters of HDCAT plans were compared with those of three-dimensional conformal radiotherapy (3D-CRT) plans in terms of target volume coverage, dose conformity, and sparing of organs at risk. Results: HDCAT showed better dose conformity compared with 3D-CRT (conformity index: 0.74 ± 0.06 vs. 0.62 ± 0.06, p < 0.001). HDCAT significantly reduced the lung volume receiving more than 20 Gy (V₂₀: 21.4% ± 8.2% vs. 24.5% ± 8.8%, p < 0.001; V₃₀: 14.2% ± 6.1% vs. 15.1% ± 6.4%, p = 0.02; V₄₀: 8.8% ± 3.9% vs. 10.3% ± 4.5%, p < 0.001; and V₅₀: 5.7% ± 2.7% vs. 7.1% ± 3.2%, p < 0.001), V₄₀ and V₅₀ of the heart (V₄₀: 5.2 ± 3.9 Gy vs. 7.6 ± 5.5 Gy, p < 0.001; V₅₀: 1.8 ± 1.6 Gy vs. 3.1 ± 2.8 Gy, p = 0.001), and the maximum spinal cord dose (34.8 ± 9.4 Gy vs. 42.5 ± 7.8 Gy, p < 0.001) compared with 3D-CRT. Conclusions: HDCAT could achieve highly conformal target coverage and reduce the doses to critical organs such as the lung, heart, and spinal cord compared to 3D-CRT for the treatment of lung cancer patients.

• The korean journal of orthodontics
• /
• v.46 no.6
• /
• pp.356-363
• /
• 2016

Objective: The additional arch length required for leveling (AALL) the curve of Spee (COS) can be estimated by subtracting the two-dimensional (2D) arch circumference, which is the projection of the three-dimensional (3D) arch circumference onto the occlusal plane, from the 3D arch circumference, which represents the arch length after leveling the COS. The purpose of this study was to determine whether the cusp tips or proximal maximum convexities are more appropriate reference points for estimating the AALL. Methods: Sixteen model setups of the mandibular arch with COS depths ranging from 0 mm to 4.7 mm were constructed using digital simulation. Arch circumferences in 2D and 3D were measured from the cusp tips and proximal maximum convexities and used to calculate the AALL. The values obtained using the two reference points were compared with the paired t -test. Results: Although the 3D arch circumference should be constant regardless of the COS depth, it decreased by 3.8 mm in cusp tip measurements and by 0.4 mm in proximal maximum convexity measurements as the COS deepened to 4.7 mm. AALL values calculated using the cusp tips as reference points were significantly smaller than those calculated using the proximal maximum convexities (p = 0.002). Conclusions: The AALL is underestimated when the cusp tips are used as measurement reference points; the AALL can be measured more accurately using the proximal maximum convexities.

• Progress in Medical Physics
• /
• v.34 no.1
• /
• pp.10-13
• /
• 2023

Patients with breast cancer can be positioned with their head turned to the contra lateral side or with their head straight during the radiation therapy treatment set-up. In our hospital, patients with locally advanced breast cancer who were receiving radiation therapy have experienced swallowing difficulty after 2 weeks of irradiation. In this pilot study, the impact of head position on reducing dysphagia occurrence was dosimetrically evaluated. Patients were divided into two groups viz., HT (head turned to the contra lateral side of the breast) and HS (head straight) with 10 members in each. Treatment planning was performed, and the dosimetric parameters such as Dmin, Dmax, Dmean, V₅, V₁₀, V₂₀, V₃₀, V₄₀, and V₅₀ of both groups were extracted from the dose volume histogram (DVH) of esophagus. The target coverage in the supraclavicular fossa (SCF) region was analyzed using D₉₅ and D₉₈; moreover, the dose heterogeneity was assessed with D₂ from the DVHs. The average values of the dose volume parameters were 27.6%, 58.6%, 35.4%, 19%, 13.8%, 14.1%, 11.8%, 8.4%, and 8.1% higher in the HT group compared with those in the HS group. Furthermore, for the SCF, the mean values of D₉₈, D₉₅, and D₂ were 42.4, 47.5, and 54 Gy, respectively, in the HS group and 38.9, 45.35, and 55.5 Gy, respectively, in the HT group. This pilot study attempts to give a solution for the poor quality of life of patients after breast radiotherapy due to dysphagia. The findings confirm that the head position could play a significant role in alleviating esophageal toxicity without compromising tumor control.

• Progress in Medical Physics
• /
• v.7 no.1
• /
• pp.3-7
• /
• 1996

The accuracy in target localization of CT, MR, and digital angiography were investigated for stereotactic radiosurgery. The images using CT and MR were obtained out of geometrical phantom which was designed to produce exact coordinates of several points within a 0.lmm error range. The slice interval was 3mm and FOV was 35cm for CT and 28cm for MR. These images were transferred to treatment planning computer using TCP/IP in forms of GE format. Measured 3-D coordinates of these images from planning computer were compared to known values by geometrical phantom. Anterior-posterior and lateral films were taken by digital angiography for measurement of spatial accuracy. Target localization errors were 1.2${\pm}$0.5mm with CT images, 1.7${\pm}$0.4mm with MR-coronal images, and 2.1${\pm}$0.7mm with MR-sagittal images. But, in case of MR-axial images, the target localization error was 4.7${\pm}$0.9mm. Finally, the target localization error of digital angiography was 0.9${\pm}$0.4mm. The accuracy of diagnostic machines such as CT, MR, and angiography depended on their resolutions and distortions. The target localization error mainly depended on the resolution due to slice interval with CT and the image distortion as well as the resolution with MR However, in case of digital angiography, the target localization error was closely related to the distortion of fiducial markers. The results of our study should be considered when PTV (Planning Target Volume) was determined.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.4
• /
• pp.253-265
• /
• 2016

We propose an obstacle classification method using multi-decision factors and decision sections based on Single 2D LiDAR. The existing obstacle classification method based on single 2D LiDAR has two specific advantages: accuracy and decreased calculation time. However, it was difficult to classify obstacle type, and therefore accurate path planning was not possible. To overcome this problem, a method of classifying obstacle type based on width data was proposed. However, width data was not sufficient to enable accurate obstacle classification. The proposed algorithm of this paper involves the comparison between decision factor and decision section to classify obstacle type. Decision factor and decision section was determined using width, standard deviation of distance, average normalized intensity, and standard deviation of normalized intensity data. Experiments using a real autonomous vehicle in a real environment showed that calculation time decreased in comparison with 2D LiDAR-based method, thus demonstrating the possibility of obstacle type classification using single 2D LiDAR.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.20 no.1
• /
• pp.39-52
• /
• 1992

In order to make plan for landscape construction by ecological methods in Yukong R & D Complex site, environmental factors and structure of plant community were investigated and analyzed around Yukong R & D Complex site of Daeduk. The result of this study were as follows: 1. In the result by the classification of TWINSPAN and ordination (DCA) techniques for analysing of plant community structure, thirty plant community structure, thirty plots were divided into four groups according to soil moisture and succession trends were seem to be from the development of subsidiary vegetation through Pinus densiflora, Quercus spp., Robinia psudoacasia community to Q. acutissima community. So this result was proposed to validity of vegetation introduction for planning of ecological landscape construction in studied site. 2. On the analysis of environmental factors by ordination techeniques, the plant community were divided by soil moisture. Soilcondition will be fertilized by introduction of broad-leaved tree and the development of succession trends from the present state of plant community to Q. acutissima community. 3. The problems of horiticultural places happened to studied site, so horiticultural places for ecological landscape construction was proposed planting techniques that were considered to soil suitability, economical efficiency, native species and wildlife. 4. If we attempt to ecological landscape designs on natural systems and use natural processes to achieve desired end-points, we are more likely to produce self-sustaining solutions.