• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.71-79
• /
• 2002

A new rapid prototyping process, Variable Lamination Manufacturing using a 4-axis-controlled hotwire cutter and expandable polystyrene foam sheet as a laminating material of the part (VLM-S), has been developed to reduce building time and to improve the surface finish of parts. The objective of this study is to reconstruct the surface of the original 3D CAD model in order to generate mid-slice data using the advancing front technique. The generation of 3D layers by a 4 axis-controlled hot-wire cutter requires a completely different procedure to generate toolpath data unlike the conventional RP CAD systems. The cutting path data for VLM-S are created by VLM-Slicer, which is a special CAD/CAM software with automatic generation of 3D toolpath. For the conventional sheet type system like LOM, the STL file would be sliced into 2D data only. However, because of using the thick layers and a sloping edge with the firstorder approximation between the top and bottom layers, VLM-Slicer requires surface reconstruction, mid-slice, and the toolpath data generation as well as 2D slicing. Surface reconstruction demands the connection between the two neighboring cross-sectional contours using the triangular facets. VLM-S employs thick layers with finite thickness, so that surface reconstruction is necessary to obtain a sloping angle of a side surface and the point data at a half of the sheet thickness. In the process of the toolpath data generation the surface reconstruction algorithm is expected to minimize the error between the ruled surface and the original parts..

• Archives of Plastic Surgery
• /
• v.39 no.4
• /
• pp.309-316
• /
• 2012

Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.1 s.23
• /
• pp.65-72
• /
• 2005

The 3D objects far representing artificial element in building project can be easily organized in 4D system. However, the civil engineering projects need a composing technology of irregular triangulate network because the projects generally include earthwork of large scale that consists of cutting, filling, and excavating work. It Is very difficult to represent earthwork status as 3D object type because the earthwork in highway or railway projects is being progressed on the natural geographical features. That is, a composing technology of irregular triangulate networks necessary function to simulate natural site condition as 3D object in 4D system. This study suggests a new composing technology of irregular triangulate network that 3D objects can be automatically generated by attribute in each layer.

• Land and Housing Review
• /
• v.11 no.3
• /
• pp.93-101
• /
• 2020

Recently, as a BIM-based construction simulation system, 4D CAD tools using virtual reality (VR) objects are being applied in construction project. In such a system, since the expression of the object is based on VR image, it has a sense of separation from the real environment, thus limiting the use of field engineers. For this reason, there are increasing cases of applying augmented reality (AR) technology to reduce the sense of separation from the field and express realistic VR objects. This study attempts to develop a methodology and BIM module for the pre-construction verification system using AR technology to increase the practical utility of VR-based BIM objects. To this end, authors develop an AR-based drawing verification function and drawing object-based 4D model augmentation function that can increase the practical utility of 2D drawings, and verify the applicability of the system by performing case analysis. Since VR object-based image has a problem of low realism to field engineers, the linking technology between AR object and 4D model is expected to contribute to the expansion of the use of 4D CADsystem in the construction project.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.82-98
• /
• 2021

In recent years, as the number of ground subsidence has increased nationwide, the latest and usefulness of underground information for underground space development and underground safety management has become more important than ever. However, the 3D Underground Geospatial Map project, which started in 2015, has a problem with the manual-based long-term update system. This research paper overcomes these limitations and automatically updates the 3D CAD/GIS-based integrated management of underground structures that can be managed automatically from a full-cycle perspective of underground structure data management such as processing, transformation, updating, management, and visualization of 2D/3D underground structure data. If this technology is applied, it is possible to integrate processing and update management of the existing complex 3D construction logic of underground structures in one system, and it is expected that it can be used for underground space development and underground safety management as a foundation technology for automatic update of underground structures data.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1161-1165
• /
• 2009

Safety of workers and productivity in construction site are affected according to the conflict status of work spaces which are performed at a time. The interference among the work spaces in construction site should be minimized because it becomes a blocking factor that causes construction delay and low productivity. Those factors can be managed by reasonable H&S (Health & Safety) practice. This research suggests the requirements of H&S practice and rules to establish the strategy of H&S management based on the literature reviews related to H&S rule. The suggested H&S rule can be visualized for searching space conflict point if the rule is linked with visual simulation tool. Accordingly the research results can be used for improving and visualizing construction productivity by work space control in 4D/nD CAD system.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.550-553
• /
• 2005

To acquire radar target signature, various kinds of target are necessary. Measurement is one of the data acquiring method, but much time and high cost is required to get the target data from the real targets. Even if we can afford that, the targets we can access are very limited. To obtain target signatures avoiding these problems, we build the target CAD (Computer Aided Design) model for the calculation of target signatures. To speed up RCS calculation, we applied adaptive super-sampling and tested quite complex tank CAD model which is 1.4 hundred of thousands facet. We use calculated RCS data for ID range profile and 2D ISAR (Inverse Synthetic Aperture Radar) image formation. We adopted IFFT (Inverse Fast Fourier Transform) algorithm combined with polar formatting algorithm for the ISAR imaging. We could confirm the possibility of the construction of database from the images of CAD models for target classification applications.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.1135-1138
• /
• 2011

안드로이드 시장이 급성장함에 따라 안드로이드 기반 어플리케이션에 대한 수요가 많아지고 있다. 그로 인해 3D 그래픽적 기능을 요구하는 어플리케이션에 대한 요구도 늘어났다. 그러나 안드로이드 단말기에서는 3D 처리능력이 데스크 탑과 비교하여 성능과 서비스에 한계가 있다. 그렇기 때문에 VNC(Virtual Network Computing)를 사용하여 고성능의 그래픽을 요구하는 프로그램을 실행할 수 있게 된다. VNC 란 클라이언트에서 데스크 탑으로 접속하여 원격으로 제어하고 그 결과를 그래픽으로 확인하는 프로그램이다. 그러나 기존의 Android VNC 는 해상도가 낮고, 이미지 전송 속도가 느리기 때문에 3D 렌더링 이미지 처리가 불가능했다. 또한 Android VNC 는 인터페이스가 불편하여 입력 오류가 많아 사용이 불편했다는 단점 등이 지적되어 왔다. 본 논문에서는 이를 개선하기 위한 Android Turbo VNC 를 제안한다. Android Turbo VNC는 libjpeg-turbo 코덱을 적용하여 3D 이미지 부분에서 기존의 Android VNC 에 비하여 약 80~120%의 이미지 개선과 이미지 압축률을 4 배정도 높여 CAD 와 같은 고성능의 그래픽을 요구하는 프로그램의 사용을 가능하게 한다. 그리고 Android Turbo VNC 에서는 기존 Android VNC 의 불편한 UI 를 개선하였다. 클라우드 서버에서는 CAD, Document, Game, Video, General 총 5 가지의 프로그램을 서비스하여 그에 맞는 테마 별 UI 를 제공한다. libjpeg-turbo 코덱의 적용을 통해 Android-Turbo VNC 는 수십 장의 설계 도면을 굳이 들고 다니지 않더라도 하나의 테블릿 PC 안에서 보는 것이 가능하게 된다. 테마별 UI 중 CAD 테마는 3D CAD 를 사용하는 산업현장에서 적극적으로 활용될 것으로 기대된다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.53-53
• /
• 2023

Abeliophyllum distichum, one of the Korean endemic plant, is a significant pharmaceutical plant resource. A. distichum with phenylethanoid glycoside can use to regulate the development of cancer, DNA damage with radicals, and the generation of inflammatory mediators. In this study, we investigated whether the biomass, content of phenylethanoid glycoside, and growth rate of callus derived from A. distichum (cultivar Okhwang1, CAD) change in the absence or presence of plant hormones (2,4-Dichlorophenoxyacetic acid; 2, 4-D and 1-Naphthaleneacetic acid; NAA). The results showed that the best biomass, the growth rate of callus, and the contents of phenylethanoid glycoside were cultivated on Murashige and Skoog (MS) growth medium fortified with 1 ppm 2,4-D + 2 ppm NAA after 4 weeks. In a further study, CAD was cultivated on MS growth medium fortified with an elicitor (Methyl Jasmonate, MeJA). The results showed that CAD turned to brown color and fragile form with the elicitor. HPLC-PDA analysis revealed that the contents of phenylethanoid glycoside in the elicitor-treated group were higher than in the elicitor-non-treated group. These results are consistent with the findings of Arano-Varela H et al.,'s study which is that acteoside production can increase after the treatment of MeJA. Therefore, this study can be used to develop an effective and sustainable production of useful substances as an alternative to plant cultivation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.55-61
• /
• 2016

BIM is a rising core technology for increasing the productivity of the AEC industry, but such a paradigm shift is placing excessive demand on the practice of small medium size enterprises. BIM has many useful functions that are difficult to imagine in 2D CAD but BIM programs and the system buildup cost are too expensive. Therefore, small medium size enterprises hesitate to apply BIM in their fields. In this study, a customized 4D and 5D system was implemented using the building information generated from basic BIM tools, such as Revit, MS Project, Navisworks, and Excel VBA's customizing process to review the schedule and verify the quantities according to the schedule. Those programs are so basic in BIM circumstances, that small medium size enterprises can be equipped without burden. As a result, essential building information for 4D and 5D system implementation was investigated and its customizing process was established.