• Journal of Plant Biology
• /
• v.37 no.4
• /
• pp.441-444
• /
• 1994

From immature seed of Phaseolus vulgaris L., a novel phytosteryl glucoside was isolated. Strong ion peaks at m/z 613 $[M+Na}^{+},\;696\;[M+Matrix]^{+}$ in positive F AB- MS and at m/z 589 $[M-1]^{-}$ in negative F AB- MS indicated the molecular weight of the compound is 590. Four hundred MHz $^IH-NMR$ analysis revealed that the compound canys a 24-hydroxy-24-vinyl-cholesterol (saringosterol) as an aglycone and a ${\beta}-D-glucopyranose$. Four hundred MHz $^IH-NMR$ analysis of the acetate derivate of the compound revealed that hydroxyls at C-1' in glucose moeity and at C-3 in aglycone have been condensed. Therefore, the phytosteryl glucoside was characterized to be $3-0-{\beta}-D-glucopyranosyl-24-hydroxy-24-vinyl-cholesterol$ (saringosteryl glucoside). This is the first demonstration for the presence of saringosterol in higher plants. Also this is the first identification of saringosteryl glucoside in natural materials.erials.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.961-968
• /
• 2020

This paper describes a design of high performance modular multiplier that is essentially used for elliptic curve cryptography. Our modular multiplier supports modular multiplications for five field sizes over GF(p), including 192, 224, 256, 384 and 521 bits as defined in NIST FIPS 186-2, and it calculates modular multiplication in two steps with integer multiplication and reduction. The Karatsuba-Ofman multiplication algorithm was used for fast integer multiplication, and the Lazy reduction algorithm was adopted for reduction operation. In addition, the Nikhilam division algorithm was used for the division operation included in the Lazy reduction. The division operation is performed only once for a given modulo value, and it was designed to skip division operation when continuous modular multiplications with the same modulo value are calculated. It was estimated that our modular multiplier can perform 6.4 million modular multiplications per second when operating at a clock frequency of 32 MHz. It occupied 456,400 gate equivalents (GEs), and the estimated clock frequency was 67 MHz when synthesized with a 180-nm CMOS cell library.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.389-395
• /
• 2012

In this paper, we analyzed the frequency spectrum of the electromagnetic waves radiated by an electric discharge as a basic study to develop an on-line diagnostic technique for power equipment installed inside closed-switchboards. In order to simulate local and series arc discharges caused by an electric field concentration and poor connections, three types of electrode systems were fabricated, consisting of needle and plane electrodes and an arc generator meeting the specifications of UL 1699. The experiment was carried out in an electromagnetic anechoic chamber, and the measurement system consisted of a PD free transformer, a loop antenna with a frequency bandwidth of 150 kHz-30 MHz, an ultra log periodic antenna with a frequency bandwidth of 30 MHz-2 GHz, and an EMI test receiver with a frequency bandwidth of 3 Hz-3 GHz. According to the experimental results, the frequency spectra of the electrical discharges were widely distributed across a range of 150 kHz-400 MHz, depending on the defects, while commonly found between 150 kHz and 10 MHz. Therefore, considering the ambient noise and antenna characteristics, the best frequency bandwidth for a measurement system to monitor abnormal conditions by detecting electromagnetic waves in closedswitchboards is 150 kHz-10 MHz.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.17-23
• /
• 2023

In semiconductor manufacturing processes, a cleaning process is important that can remove sub-micron particles. Conventional wet cleaning methods using chemical have limits in removing nano-particles. Thus, physical forces of a mechanical vibration up to 1 MHz frequency, was tried to aid in detaching them from the substrates. In this article, we developed a 1 MHz quartz megasonic for a bare wafer cleaning using finite element analysis. At first, a 1 MHz megasonic prototype was manufactured. Using the results, a main product which can improve a particle removal performance, was analyzed and designed. The maximum impedance frequency was 992 kHz, which agreed well with the experimental value of 986 kHz (0.6% error). Acoustic pressure distributions were measured, and the result showed that maximum / average was 400.0~432.4%, and standard deviation / average was 46.4~47.3%. Finally, submicron particles were deposited and cleaned for the assessment of the system performance. As a result, the particle removal efficiency (PRE) was proved to be 92% with 11 W power. Reflecting these results, the developed product might be used in the semiconductor cleaning process.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.343-346
• /
• 2005

유비쿼터스 시대의 도래로 인해 많은 IT업체는 유비쿼터스 핵심기술을 기반으로 발전하고 있다. 이러한 유비쿼터스 핵심기술의 상당부분은 무선통신기술 RF를 이용한 것이며 이를 활용하여 RFID 시스템 및 Ubiquitous Sensor Network 등을 구축할 수 있다. 본 논문에서는 이에 적합한 400/800MHz ISM/SRD 밴드대역을 사용하는 무선 트렌시버 단일 칩인 CC1020을 이용하여 하드웨어를 구성 하였다. CC1020칩을 사용하면 저전력, 고감도, 적은 주변회로 구성 등 많은 이점이 있으며 주파수원 고정과 필터링 및 전원공급상태 그리고 PC와의 interface등의 하드웨어를 쉽게 구현할 수 있다. 따라서 이러한 각 주변회로 구성에 대해 설명하고 실제 구현을 통해 DATA의 송수신실험을 통해 하드웨어의 특성을 확인 하였다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.6
• /
• pp.23-31
• /
• 1995

As a study on electromagnetic radiation emission from the neon signs, this paper has investigated the characteristics of frequency bands and spectra intensities under the operations of the sign's OFF, ON/OFF and continuous ON states. Also we have studied the above characteristics when a distance between the sign and the antenna is varied. All data were obtained in the range of 0.1∼1,000[MHz] by using spectrum analyzer along with the loop, biconical and log periodic antenna. As the result, we found that the radiated electromagnetic waves of the sign at continuous ON states were measured only in the range of 30∼400[MHz] but those of the sign at ON/OFF states were appeared widely in the range of 2∼1,000[MHz].

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.544-547
• /
• 1999

This paper proposes a high-speed texture mapping algorithm and apply it for the realtime face animation. The mapping process devide into pixel correspondences, Z-buffering, and pixel value interpolation. Pixel correspondences and Z-buffering are calculated exactly through the algorithm. However, pixel values interpolation is approximated without additional calculations. The algorithm dramatically reduces the operations needed for texture mapping. Only three additions are needed in calculation of a pixel value. We simulate the 256$\times$240 pixel facial image with about 100 pixel face width. Simulation results shows that frame generation speed are about 60, 44, 21 frames/second in pentium PC 550MHz, 400MHz, 200MHz, respectively,

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.247-251
• /
• 2001

본 논문에서는 MESFET을 이용하여 2670MHz에서 8010MHz로 주파수를 체배하는 Frequency Tripler를 설계 및 제작하였다. A급에 동작점을 두어 3차 하모닉 성분을 발생시켰고, λ$_{g}$/4 개방형 스터브와 대역통과 필터를 이용하여 기본주파수와 2차 하모닉성분을 억제하였다. 측정결과 0dBm의 입력신호에 대해 출력주파수인 8.16GHz에서 변환이득은 -0.33dB, -55dBc의 기본 주파수 억압, -33dBc의 2차 하모닉 성분의 억압을 얻었다. 2.5GHz～2.84GHz의 입력주파수에서 400MHz의 사용대역을 얻었다.

• Information and Communications Magazine
• /
• v.25 no.2
• /
• pp.41-46
• /
• 2008

무선 캡슐형 내시경 시스템 설계를 위하여 인체내부에서 표면까지의 전송손실을 $0.001{\sim}2$ GHz대역에 대하여 분석하였다. 실제 인체구조 모델에 안테나를 적용하여 계산결과를 얻은 기존 연구와 달리 인체내 매질의 평균적 특성을 갖는 균일 매질로 가정하여 안테나의 Q와 효율을 계산하였다. 계산 결과 40MHz의 HPBW(Half-Power Bandwidth), 5mm반경 크기의 송신안테나, 15un거리에 대하여 $400{\sim}600$MHz 사이에서 -58dB가량의 최적 손실이 예상되었다. 분석된 손실 결과를 바탕으로 450MHz에서 무선 캡슐형 내시경 시스템이 설계 및 제작되었고 실제 유사매질용액에서 실험결과 15cm/10cm거리에서 -62/-5ldB의 손실을 보였으며 동물실험에서는 돼지 체내외간 10cm가량의 거리에 대해 약 -56dB의 손실이 측정되었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.24-31
• /
• 2008

Power converters are becoming an essential block in modem mobile multimedia application. This paper presents a high performance DC-DC buck converter for mobile applications. Controller of DC-DC buck converter is designed by current-mode control method. An current-mode DC-DC converter is implemented in a standard $0.18{\mu}m$ CMOS process, and the overall die size was $1.2mm^2$. The peak efficiency was 86 % with a switching frequency of $1\sim1.5MHz$ and a maximum load current of 400mA.