• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.3-8
• /
• 1991

내경이 2mm, 외경이 20 mm인 BeO 세마믹관을 이용하여 단일 발진선을 갖는 연속발진 BeO 도파관 CO2 레이저를 제작하였다. 이때 레이저의 총길이는 약 420mm이며, 공진기 길이는 365mm 이다. 가스압력비가 He : N2 : CO2 = 5 : 2 : 3 이고, 가스 입력부의 총압력이 91 torr 근처에서 이 레이저의 단일 발진선인 10P(14) line의 출력이 800 mW 이상이였으며, 횡모드는 대단히 안정된 EH11 (TEM00 에 대응) 단일모드였다. 또한 위의 조건에서 이 레이저의 tunability는 367 MHz 였다.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.241-245
• /
• 2009

High speed train system generates much EMI (electromagnetic interference) by arc between the pantograph and the trolley line during the running time. EMI from the tilted EMU train system which is similar to HEMU-400X system for 400 km/h speed and with the distributed engines was measured following EN50121-2, 'Railway applications. - Electromagnetic compatibility (Emission of the whole railway system to the outside world)'. Measured EMI values exceed the limiting values of EN50121-2 in high frequency band ($30\;MHz{\sim}1,000\;MHz$), but exceeding frequencies were identified that they are used for mobile communications. Measured EMI values did not exceed the limiting values in other low frequency band between 9 kHz and 30 MHz.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.73-79
• /
• 2015

Enhanced bandwidths of the GPS microstrip patch antennas applied by a Wilkinson power divider and a quadrature hybrid were compared. The square patch was designed, and fed by the two port probes for the circuit application. The Wilkinson power divider and quadrature hybrid circuit were designed, and applied to the patch antenna. The designed patch and two circuits were implemented on the FR4 board, and combined together. The measurement of the bandwidth within a voltage standing wave ratio (VSWR) of 2: 1 were 36.5% (1,200~1,775 MHz) in the case of the Wilkinson power divider and 29.84% (1,230~1,700 MHz) in the case of the quadrature hybrid. Axial ratios (AR) in 3dB were 17.14% bandwidth (1,360~1,630 MHz) and 15.87% bandwidth (1,400~1,650 MHz), respectively. The application of the Wilkinson power divider is wider than that of the quadrature hybrid. The peak gains in the anechoic chamber at the GPS center frequency were measured as 2.84 dBi and 2.75 dBi, respectively.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.6
• /
• pp.59-66
• /
• 2018

In this paper, we experimented how long distance voice communication is possible After implemented PTT(Push to talk) Bi-directional radio using open source project Codec 2, which is a low speed voice codec for digital amateur radio and 900MHz FSK transceiver. In case of a general digital radio, the AMBE+2 codec, which is regarded as an industry standard in terms of performance, is expensive and has the monopoly of technology. Using the 400MHz band in terms of frequency, narrow bandwidth of DMR(12.5kHz) and DPMR(6.25kHz) is used, so the data rate is low. In the 900MHz bandwidth can be extended, which is advantageous in terms of data transmission. As a result of the voice quality and distance field test, we could find that the communication takes place within about 500m. In this paper, only voice communication is reviewed. if a review of data transmission such as a simple image is added, this solution can be used in various fields as a low cost IOT radio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.116-120
• /
• 2004

In this paper, we proposed a method to shift the resonant frequency by applying the electric field to microstrip patch antenna using piezoelectric substrates. We fabricated microstrip patch antenna using Y-cut LiNbO3, Quartz and FR-4 substrates. We designed and simulated the microstrip antennas by Ensemble V 7.0 of the simulation too1. We observed the resonant frequency by DC applied electric field in a microstrip patch antenna. When the electric field was 300 V/mm, the resonant frequency agile of Y-cut LiNbO3 microstrip patch antennas were 29 MHz. When the electric field was 400 V/mm, the frequency agile of X-cut, Y-cut and Z-cut quartz microstrip patch antennas were 55.2 MHz, 34.2 MHz and 28.0 MHz, respectively. However, when the electric field was 400 V/mm, the resonant frequency of FR-4 microstrip patch antenna does not changed. It was shown that the resonant frequency agile of Y-cut and Z-cut quartz microstrip patch antennas are due to piezoelectric phenomenon not to be permittivity.

• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.16-18
• /
• 2005

본 논문은 변압기 내부에서 부분방전에 의한 전자파 시뮬레이션을 위하여 200MHz, 400MHz, 800MHz에 대해서 전자파의 세기 분포를 계산하였다. 하나의 주파수에서는 거리와 세기의 관계가 없는 것으로 보였지만 3개의 주파수를 종합하면 거리와 세기가 관계있는 것으로 평가되었다. 이와 같은 부분방전측정에 알맞은 폴디드 다이폴 센서를 설계하였고 모델 변압기에서 모의 펄스를 사용하여 측정을 하였다.

• Proceedings of the KIEE Conference
• /
• 2005.11c
• /
• pp.96-98
• /
• 2005

본 논문은 변압기 내부에서 부분방전에 의한 전자파 시뮬레이션을 위하여 200MHz, 400MHz, 800MHz에 대해서 전자파의 세기 분포를 계산 하였다. 하나의 주파수에서는 거리와 세기의 관계가 없는 것으로 보였지만 3개의 주파수를 종합하면 거리와 세기가 관계있는 것으로 평가되었다. 이와 같은 부분방전측정에 알맞은 폴디드 다이폴 센서를 설계하였고 모델 변압기에서 모의 펄스를 사용하여 측정을 하였다.

• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.8-12
• /
• 2004

In this paper, a triple-band printed dipole antenna using parasitic elements is proposed for the multiple wireless services. The proposed antenna is designed and experimentally analyzed at the bands of PCS, IMT-2000, and ISM services. To achieve triple frequency operation, the proposed antenna contains two parasitic elements, which act as additional resonators by coupling from the driving dipole antenna. From the measured results, the resonant frequencies of this antenna are 1.79 ㎓, 2.03 ㎓, and 2.41 ㎓ and the measured impedance bandwidths are 90 MHz(1760∼1850 MHz), 210 MHz(1,930∼2,130 MHz), and 30 MHz(2,400∼2,430 MHz) for VSWR<2. The measured antenna gains are 2.14 ㏈i, 0.9 ㏈i, and 0.5 ㏈i, respectively. Antenna parameters for trifle-band operation are investigated and several antenna characteristics are discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.486-489
• /
• 2010

This paper describes a layered LDPC decoder which supports block length of 1,944 bits and code rate 1/2 for IEEE 802.11n WLAN standard. To reduce the hardware complexity, the min-sum algorithm and layered architecture is adopted. A novel memory reduction technique suitable for min-sum algorithm reduces memory size by 75% compared with conventional method. The designed processor has 200,400 gates and 19,400 bits memory, and it is verified by FPGA implementation. The estimated throughput is about 200 Mbps at 120 MHz clock by using Xilinx Virtex-4 FPGA device.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1189-1196
• /
• 2015

In this paper, a microstrip-fed multiband monopole antenna for GPS(Global positioning system)/WiMAX(:Worldwide interoperability for microwave access)/WLAN(Wireless Local Area Networks) for applications was designed, fabricated and measured. The proposed antenna is based on a microstrip-fed structure, and composed of two rectangular double rings and L strips pair and then designed in order to get triple band characteristics. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS). The proposed antenna is made of $27.0{\times}54.0{\times}1.0mm3$ and is fabricated on the permittivity 4.4 FR-4 substrate. The experiment results shown that the proposed antenna obtained the -10 dB impedance bandwidth 300 MHz (1.325~1.625 GHz), 400 MHz (2.275~2.675 GHz), and 600 MHz (3.15~3.75 GHz) covering the GPS/WiMAX/WLAN bands. Also, the proposed antenna measured gain and radiation patterns characteristics for required operating bands.