• 제목/요약/키워드: 4-way

검색결과 11,473건 처리시간 0.039초

IEEE 802.11i 4-way 핸드쉐이크 프로토콜의 안전성과 신뢰성 (Security and Reliability of the 4-way Handshake Protocol in IEEE 802.11i)

  • 박창섭;우병덕
    • 정보처리학회논문지C
    • /
    • 제16C권3호
    • /
    • pp.317-324
    • /
    • 2009
  • 본 논문은 IEEE 802.11i의 4-way 핸드쉐이크 프로토콜을 안전성과 신뢰성의 측면에서 분석한다. 분석을 통해 MIC 오류와 같은 특정한 상황에서 4-way 핸드쉐이크가 정상적으로 수행되지 못하는 것을 보여주고 문제 해결을 위한 수정방안을 제안한다. 또한 4-way 핸드쉐이크 프로토콜보다 안전하고 효율적인 2-way 핸드쉐이크 프로토콜을 제안한다.

순번을 이용한 고속의 안전한 무선 랜 2-Way 핸드쉐이크 기법 (Fast and Secure 2-Way Handshake Mechanism using Sequence Number in Wireless LAN)

  • 임정미
    • 한국멀티미디어학회논문지
    • /
    • 제12권9호
    • /
    • pp.1323-1332
    • /
    • 2009
  • 본 논문은 IEEE 802.11i의 4-Way 핸드쉐이크의 취약점을 분석하고, 고속의 안전한 2-Way 핸드쉐이크 방식을 제안한다. PTK 생성에서 난수 대신에 순번(Sequence Number)을 사용하여, 재생공격, DoS 공격을 방지한다. 또한 Re-association Request 프레임과 Re-association Response 프레임을 변형하여 MS(Mobile Station)과 AP(Access Point) 사이의 상호 인증과, PTK(Pairwise Transient Key)의 도출을 가능하게 하여, 전송되는 메시지의 개수를 감소시켜, 4-Way 핸드쉐이크보다 고속의 핸드오프 방식을 제안한다. 그리고 고속의 안전한 핸드오프를 제안하는 기존의 기법들과 비교 분석한다.

  • PDF

저전력 집합연관 캐시를 위한 효과적인 알고리즘 (Effective Algorithm for the Low-Power Set-Associative Cache Memory)

  • 정보성;이정훈
    • 대한임베디드공학회논문지
    • /
    • 제9권1호
    • /
    • pp.25-32
    • /
    • 2014
  • In this paper, we proposed a partial-way set associative cache memory with an effective memory access time and low energy consumption. In the proposed set-associative cache memory, it is allowed to access only a 2-ways among 4-way at a time. Choosing ways to be accessed is made dynamically via the least significant two bits of the tag. The chosen 2 ways are sequentially accessed by the way selection bits that indicate the most recently referred way. Therefore, each entry in the way has an additional bit, that is, the way selection bit. In addition, instead of the 4-way LRU or FIFO algorithm, we can utilize a simple 2-way replacement policy. Simulation results show that the energy*delay product can be reduced by about 78%, 14%, 39%, and 15% compared with a 4-way set associative cache, a sequential-way cache, a way-tracking cache, and a way cache respectively.

4-way 구조를 갖는 128 point 파이프라인 FFT 프로세서의 설계 (Design of 128 point pipelined FFT processor with 4-way structure)

  • 이상민;조언선;이성주;김재석
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.651-652
    • /
    • 2006
  • In this paper, 4-way data path 128 point pipelined FFT processor with 4-way structure is proposed. The proposed FFT processor has 4-way structure in order to meet data requirement of MB-OFDM system at 132MHz operating frequency. The FFT processor is based on R4MDC and extended to suit 4-way data path. The FFT processor is designed by Verilog HDL and the gate count is about 88k.

  • PDF

4방향흔들림방지버팀대의 구조 안정성 및 내진 성능 연구 (Study of Structural Stability and Seismic Performances of 4-Way Sway Prevention Brace)

  • 오수언;이항준;좌성훈
    • 한국재난정보학회 논문집
    • /
    • 제18권3호
    • /
    • pp.646-659
    • /
    • 2022
  • 연구목적: 본 연구에서는 기존 소방 시설에 사용되고 있는 흔들림방지버팀대에 비하여 설치 면적을 효율적으로 감소시키고, 안정성과 내진 성능이 우수한 4방향 흔들림방지버팀대를 개발하였다. 개발된 4방향 흔들림방지버팀대의 성능 및 신뢰성을 인장 및 압축 시험과 내진 시험을 통하여 검증하였다. 연구방법: KFI 인증 기준에 따라 정적시험으로서 수평 및 수직 배관에 4방향 흔들림방지버팀태을 설치하여 인장 및 압축 시험을 수행하였으며, 정격 하중에 최대 움직임을 측정하였다. 또한 동적시험으로서 물이 채워진 배관에 4방향 흔들림방지버팀태를 설치하고 가속도센서를 통하여 입력 가진파에 대한 시험응답스펙트럼을 측정하였다. 또한 내진 시험 후 배관 및 흔들림방지버팀대의 이탈, 파손 및 국부변형을 관찰하였다. 연구결과: 인장 및 압축 실험을 수행한 결과, 인장 및 압축 시에 배관의 최대 움직임은 규정 기준 대비 50%~70% 이하로서 4방향 흔들림방지버팀태의 성능이 매우 우수함을 알 수 있었다. 4방향 흔들림방지버팀태의 내진 시험결과, 시험응답스펙트럼이 요구응답스펙트럼을 포괄하고 있음을 알 수 있었다. 시험 종료 후에 배관 및 흔들림방지버팀대의 이탈이나 파손 및 국부변형 등은 발생하지 않았으며, 시설물의 구조적 안정성이 유지됨을 확인할 수 있었다. 결론: 본 연구에서는 정적 실험 및 동적 실험을 통하여, 개발된 4방향 흔들림방지버팀대가 KFI 인중 기준을 만족하고 있음을 알 수 있었고, 기존 흔들림방지버팀대에 비하여 효율성과 경제성 및 안정성과 내진 성능이 우수함을 확인할 수 있었다.

슬롯라인-마이크로스트립 변환을 이용한 도파관 형태의 Ka-band 전력 분배/결합기 (A Novel Waveguide-based Ka-band Power Divider/Combiner Using Slotline-to-Microstrip Transitions)

  • 정진호;천창율;권영우
    • 한국통신학회논문지
    • /
    • 제27권5C호
    • /
    • pp.506-511
    • /
    • 2002
  • 본 논문에서는 널리 알려진 슬롯 라인-마이크로스트립 변환을 이용하여 Ka-band에서 동작하는 도파관 형태의 전력 결합기를 제안하였다. 입력이 구형 도파관이고 출력이 마이크로스트립인 전력 분배기는 구형 도파관-슬롯라인 변환, 슬롯라인-마이크로스트립 변환, 그리고, 임피던스 정합회로 등으로 구성되어 있다. 2-way 전력 결합기는 두개의 슬롯라인-마이크로스트립 변환을, 4-way는 2-way 전력 결합기 2개와 sloltline tee junction을 이용하여 개발되었다. 3차원 유한 요소법을 이용하여 제안된 구조를 수치 해석하여 최적의 특성이 나오도록 설계하였고, 손실이 작은 수정 기판을 사용하여 제작하였다. Back-to-back으로 연결된 전력 결합기를 측정한 결과, 공진 주파수를 제외하면, 2-way 전력 분배기는 25.7∼29.8 GHz에서 삽입손실은 1.0 dB 이하, 반사손실은 15 dB 이상이었고, 4-way의 경우는 26∼28.2GHz에서 삽입손실이 1.0 dB 이하, 반사손실이 15 dB 이상의 우수한 특성을 얻을 수 있었다.

한국전통마을에 있어서 갈림길의 유형과 형태에 관한 연구 (A Study of Types and Forms of Branch-road in Traditional Korean Villages)

    • 한국조경학회지
    • /
    • 제27권1호
    • /
    • pp.101-109
    • /
    • 1999
  • The purpose of this study is to analyse types and forms of branch-road in traditional korean villages. To do this, this study has selected and measured 87 branch-road cases of five traditional villages. An analysis of the case study has revealed the following results : 1. Branch-roads have four formations : 3 way, 4 way, multi-way and others. 2. Branch-roads comprise 64 percent of 3 way, 18 percent of 4 way, 8 percent of multi-way and 9 percent of others, respectively. 3. Topographic conditions have mostly affected the formation of branch-roads. 3 way of branch - roads are easily found in flat village. 4 way are multi-way of branch-road are found in semi-hilly and hilly village 4. 3 way of branch-roads have three types: T-type, Y-type, and y-type. 5. T-types are easily found in flat village, but Y-type and y-type are found in semi-hilly and hilly village. 6. Each angle of T-type is 171,99,90, respectively. It has turned out 8 degree is slightly deviated form the square. 7. Y-type of branch-road has an asymmetric form, comprising 145, 128, 87 degree of the angle, compared to 150, 150, 60 degree of symmetric one. 8. Average angles of y-type that are mostly found in hilly village are 175, 113, 72. Angle differences from each spot are 62 and 41 degree. It is assumed that 39 degree is a slope of least effort to walk. 9. 4 way of branch-roads have not only "+" type but various types of K, Y and Y, Y and y, T and y and a foot of bird. 10. It is assumed that multi-way of branch-roads, mostly found on the middle and bottom of the hilly slope, has naturally formed to connect up and down, left and right.and right.

  • PDF

도파관 천이 구조를 갖는 모노펄스 레이더용 4-Way 윌킨슨 분배기 설계 (Design of 4-Way Wilkinson Divider with Waveguide to Stripline Transition Used in The Monopulse Radar Front-end)

  • 고영목;나극환
    • 대한전자공학회논문지TC
    • /
    • 제47권11호
    • /
    • pp.69-76
    • /
    • 2010
  • 본 논문에서는 X-Band 모노펄스 레이더 RF 프론트 엔드에서 국부발진 신호를 동일 진폭, 동일 위상으로 분배하는 도파관 천이 구조를 갖는 4-Way 윌킨슨 분배기 설계에 대해 연구하였다. X-Band에서 동작하는 모노펄스 레이더 프론트 엔드는 합, 방위각 및 고각 신호를 하강변환 하는 3개의 도파관 수신믹서와 체계 연동시 X-Band 시험신호를 발생하는 SSB 도파관 믹서로 구성된다. 프론트 엔드를 구성하는 각 믹서에 국부발진(LO : Local oscillator) 신호를 입력하기 위해서는 저 손실 특성을 가지면서 동일 전력 레벨과 동 위상으로 LO 전력을 분배하는 4-Way 분배기가 요구된다. 본 논문에서는 저 손실, 동위상으로 LO 신호를 분배하기 위해 도파관 천이 구조를 갖는 4-Way 윌킨슨 분배기를 설계/제작 하였다. 제작된 윌킨슨 전력 분배기는 X-Band에서 삽입손실이 평균 6.8dB, VSWR은 1.06~1.28였으며, 이때 각 단자 출력 위상차는 최대 4.5도 이내를 유지하였다.

H.264의 움직임추정에서 2차원 데이터재사용으로 메모리대역폭을 개선하기 위한 4방향 검색윈도우 (A new 4-way search window for improve memory bandwidth by 2-D data reuse for ME in H.264)

  • 이경호;이승권;공진흥
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.403-404
    • /
    • 2008
  • In this paper, a new 4-way search window is developed for H.264 Motion Estimation(ME) to improve the memory bandwidth. The proposed 4-way(up, down, left, right) search window could improve the reuse of overlapped window data to reduce the redundancy access factor by 1.4, though the 1/3-way search window requires $7.7{\sim}11$ times of data retrieval redundantly. In experiments, the new implementation of 4-way search window on Altera Stratix-III could deal with CIF ($352{\times}288$) video of 3 reference frame, $48{\times}48$ search area and $16{\times}16$ macroblock by 30fps real time at 55.2MHz.

  • PDF

V/UHF-대역 광대역 4분기 전력 분배기 설계 (Design of a V/UHF-Band Broadband 4-Way Power Divider)

  • 박여일;고진현;하재권;박영주;박동철
    • 한국전자파학회논문지
    • /
    • 제18권8호
    • /
    • pp.904-912
    • /
    • 2007
  • 본 논문에서는 V/UHF 대역인 $20{\sim}500 MHz$에서 동작하는 광대역 4분기 전력 분배기를 전송선 변환기와 페라이트 토로이드를 이용하여 설계하였다. 4:1 임피던스 변환기를 구현하였고, 이 4:1 변환기는 4분기 전력 분배기를 구현하기 위해 브리지 구조를 이용한 2분기 전력 분배기와 연결되었다. 구현된 4분기 전력 분배기는 요구대역 내에서 약 6.8dB의 삽입 손실, -20dB 이하의 격리도, -15dB 이하의 반사 손실 특성을 갖는 것으로 측정되었다.