• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.317-324
• /
• 2009

In this paper, a 4-way Handshake protocol in the IEEE 802.11i is analyzed in terms of both security and reliability. It is shown that the 4-way Handshake protocol breaks down under some conditions due to a MIC (message integrity code) failure, and a solution to fix it is proposed. It is also proposed that a new 2-way Handshake protocol which is more secure and efficient than the 4-way Handshake protocol.

• Journal of Korea Multimedia Society
• /
• v.12 no.9
• /
• pp.1323-1332
• /
• 2009

In this paper, we analyze security weakness of 4-Way Handshake in IEEE 802.11i and propose fast and secure 2-Way Handshake mechanism. Compute PTK(Pairwise Transient Key) using sequence number instead of random numbers in order to protect Replay attack and DoS attack. Also, proposed 2-Way Handshake mechanism can mutual authenticate between mobile station and access point and derive PTK using modified Re-association Request and Re-association Response frames. And, compare with others which are fast and secure Handoff mechanisms.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.1
• /
• pp.25-32
• /
• 2014

In this paper, we proposed a partial-way set associative cache memory with an effective memory access time and low energy consumption. In the proposed set-associative cache memory, it is allowed to access only a 2-ways among 4-way at a time. Choosing ways to be accessed is made dynamically via the least significant two bits of the tag. The chosen 2 ways are sequentially accessed by the way selection bits that indicate the most recently referred way. Therefore, each entry in the way has an additional bit, that is, the way selection bit. In addition, instead of the 4-way LRU or FIFO algorithm, we can utilize a simple 2-way replacement policy. Simulation results show that the energy*delay product can be reduced by about 78%, 14%, 39%, and 15% compared with a 4-way set associative cache, a sequential-way cache, a way-tracking cache, and a way cache respectively.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.651-652
• /
• 2006

In this paper, 4-way data path 128 point pipelined FFT processor with 4-way structure is proposed. The proposed FFT processor has 4-way structure in order to meet data requirement of MB-OFDM system at 132MHz operating frequency. The FFT processor is based on R4MDC and extended to suit 4-way data path. The FFT processor is designed by Verilog HDL and the gate count is about 88k.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.646-659
• /
• 2022

Purpose: In this study, we developed a 4-way sway prevention brace that efficiently reduces the installation area and has excellent stability and seismic performance compared to the conventionl sway prevention brace used in existing firefighting facilities. The performance and reliability of the developed 4-way way prevention brace were analyzed by the tensile, compression tests and seismic tests. Method: As the static test, 4-way sway prevention braces were installed on the horizontal and vertical pipes to perform the tensile and compression tests based on the KFI certification standard and the maximum movement was measured at the rated load. As a dynamic test, 4-way sway prevention braces were installed in the pipes filled with water, and the test response spectrum to the input excitation wave were measured through the acceleration sensors. After the seismic tests, separation, failure, and local deformation of the pipes, and 4-way sway prevention braces were not observed. Result: The results of the tensile and compression tests indicated that the maximum movement of the pipe during tension and compression was 50% to 70% or less compared to the certification values, indicating that the performances of the 4-way sway prevention braces were very excellent. The results of the the seismic tests indicated that the test response spectrum of the 4-way sway prevention braces is within the required response spectrum. Conclusion: In this study, it was found that the 4-way sway prevention braces satisfied the KFI certification standard and were superior compared to the existing sway prevention brace in terms of the stability, cost, and installation area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.506-511
• /
• 2002

In this paper, waveguide-based power combiner using conventional slotline-to-microstrip transition was proposed at Ka-band. The proposed 2-way and 4-way power combiner consist of waveguide-to-slotline transition, two or four slotline-to-microstrip transitions, and impedance matching networks. Their structures were simulated and optimized by 3-D FEM simulation. The 2-way power combiner showed a very low back-to-back insertion loss of 1.0 dB and return loss better than 15 dB from 25.7 GHz to 29.8 GHz except the resonant frequency. The 2-way power combining approach was extended to 4-way power combining using slotline tee junction. The 4-way power combiner showed the similar performance to that of 2-way power combiner with 2 GHz smaller bandwidth.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.1
• /
• pp.101-109
• /
• 1999

The purpose of this study is to analyse types and forms of branch-road in traditional korean villages. To do this, this study has selected and measured 87 branch-road cases of five traditional villages. An analysis of the case study has revealed the following results : 1. Branch-roads have four formations : 3 way, 4 way, multi-way and others. 2. Branch-roads comprise 64 percent of 3 way, 18 percent of 4 way, 8 percent of multi-way and 9 percent of others, respectively. 3. Topographic conditions have mostly affected the formation of branch-roads. 3 way of branch - roads are easily found in flat village. 4 way are multi-way of branch-road are found in semi-hilly and hilly village 4. 3 way of branch-roads have three types: T-type, Y-type, and y-type. 5. T-types are easily found in flat village, but Y-type and y-type are found in semi-hilly and hilly village. 6. Each angle of T-type is 171,99,90, respectively. It has turned out 8 degree is slightly deviated form the square. 7. Y-type of branch-road has an asymmetric form, comprising 145, 128, 87 degree of the angle, compared to 150, 150, 60 degree of symmetric one. 8. Average angles of y-type that are mostly found in hilly village are 175, 113, 72. Angle differences from each spot are 62 and 41 degree. It is assumed that 39 degree is a slope of least effort to walk. 9. 4 way of branch-roads have not only "＋" type but various types of K, Y and Y, Y and y, T and y and a foot of bird. 10. It is assumed that multi-way of branch-roads, mostly found on the middle and bottom of the hilly slope, has naturally formed to connect up and down, left and right.and right.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.69-76
• /
• 2010

From the present paper we researched about the design of 4-Way Wilkinson divider with waveguide to stripline transition which used to split the LO signal with equi-amplitude and equi-phase in the X-Band Monopulse radar RF front-end. The monopulse radar front end operating in the X-Band is composed of 3 waveguide reception mixers which down convert sum, azimuth and elevation signal to IF and one SSB waveguide mixers which generate X-Band test signal. It is required the 4-way divider with low loss, equi amplitude and equiphase splitting the LO signal to provide the LO signal to each mixer consisting RF frontend. In this paper we designed and fabricated the 4-Way Wilkinson divider with waveguide transition to divide the LO signal into equi-amplitude and equi-phase. The fabricated Wilkinson divider have the insertion loss 6.8dB, VSWR 1.06~1.28, and phase balance maximum 4.5degree for each output ports.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.403-404
• /
• 2008

In this paper, a new 4-way search window is developed for H.264 Motion Estimation(ME) to improve the memory bandwidth. The proposed 4-way(up, down, left, right) search window could improve the reuse of overlapped window data to reduce the redundancy access factor by 1.4, though the 1/3-way search window requires $7.7{\sim}11$ times of data retrieval redundantly. In experiments, the new implementation of 4-way search window on Altera Stratix-III could deal with CIF ($352{\times}288$) video of 3 reference frame, $48{\times}48$ search area and $16{\times}16$ macroblock by 30fps real time at 55.2MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.904-912
• /
• 2007

In this paper, a broadband 4-way power divider which can be used from 20 MHz to 500 MHz in the V/UHF band is designed using transmission-line transformer and ferrite toroid. A 4:1 impedance transformer is realized and this 4:1 transformer is connected with bridge-type 2-way dividers to form a 4-way rower divider, Insertion loss of about 6.8dB, isolation of less than -20dB, and return loss of less than -15dB in most band of interest are measured.