• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.307-312
• /
• 2016

The present study reported of the use of special shaped blade to reduce the difference in pressure across the Wells turbine for wave energy conversion. The blade profile was composed of NACA0020 airfoils and trailing edge was notched like chevron. Experiments were performed investigating the influence of trailing edge shape on the turbine performance. Four notch depths were used to investigate the effect of depth of cut on the turbine performance. As results, by placing a notch-cut at the trailing edge of the blade, it was possible to reduce the pressure difference across the turbine without lowering the efficiency. In addition, the pressure difference substantially reduced at a constant rate with the increase of the cut ratio.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2005년도 한국컴퓨터종합학술대회 논문집 Vol.32 No.1 (A)
• /
• pp.469-471
• /
• 2005

802.11 기반의 DCF 모드 상에서 하나의 패킷 전송을 위해서는 RTS-CTS-DATA-ACK 의 4가지 단계의 프레임 전송 과정이 이루어져야한다. 다중 홉 상태에서의 패킷 전송 또한 위 4단계를 거쳐서 종단 간에 패킷 전송이 이루어진다. 다중 홉 상태의 패킷 전송 단계에서는 전송 도중 패킷간의 충돌이 발생 할 수 있다. 이와 같은 충돌을 최소화 시키고 종단 간 패킷전송의 성능을 향상시키기 위한 연구가 진행되고 있다. 본 논문에서는 이러한 연구 중에 하나인 DCMA(Data-driven Cut-through Medium Access) 프로토콜[1]의 기능을 파악하고 이에 대한 보완 방법을 제안하여 이를 발전시킨 BCTMA (Bi-directional Cut-Through Medium Access) 프로토콜을 제안 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권3호
• /
• pp.290-296
• /
• 2005

The contour method is based on the elastic superposition principle, and relies on deformations that occur when a residually stressed part is cut along a plane. During the cut, the part is constrained at a location along the cut so that deformations are restrained as much as possible. The displacement is applied to an elastic FE model of the half. When plasticity is involved in the relaxation process, the superposition principle is no longer valid, and stress error in the resulting measurement of residual stress would be caused. Residual stress states in a laser peened Ti-6Al-4V strip were taken for the FE simulation.

• 한국육종학회지
• /
• 제41권4호
• /
• pp.539-542
• /
• 2009

A new gerbera variety "Pink Swan" was released by the National Horticultural Research Institute (NHRI) in 2007. A cross was made between "Royal" with orange and single and 'Himalaya' with white and semi-double in 2004. After investigation of the characteristics for 4 years (from 2004 to 2007), it was selected specially for the use of cut-flower. "Pink Swan" is a vigorous medium-sized cultivar with pink (RHS R48D), yellow green center and semi-double. The average flower diameter is 10.6 cm. And inner ray floret and disc diameter is 5.99cm and 1.83cm, respectively. It produces a large yield with continuous supply of flowers and has adequate peduncle height. We believe that "Pink Swan" has a great potential for expanding cultivated area of domestic gerbera cultivar and increasing farmers-income.

• 한국육종학회지
• /
• 제40권4호
• /
• pp.499-502
• /
• 2008

A new gerbera variety 'Yellow Wing' was released by the National Horticultural Research Institute (NHRI) in 2007. A cross was made between 'Gold Finger' with yellow and single and 'Yellow Springs' with yellow and spider in 2004. After investigation of the characteristics for 4 years (from 2004 to 2007), it was selected specially for the use of cut-flower. 'Yellow Wing' is a vigorous cultivar with yellow (RHS YO14B), green center and spider type. The flower diameter is 10.6cm. And inner ray floret and disc diameter is 2.83cm and 2.03cm, respectively. It produces a large yield with continuous supply of flowers and has adequate peduncle height and brilliant color. We believe that 'Yellow Wing' has a great potential for expanding cultivated area of domestic gerbera cultivar and increasing farmers-income.

• 호남수학학술지
• /
• 제40권4호
• /
• pp.785-794
• /
• 2018

In [8] they introduced a new finite element method for accurate numerical solutions of Poisson equations with corner singularities. They consider the Poisson equations with homogeneous Dirichlet boundary condition with one corner singularity at the origin, and compute the finite element solution using standard FEM and use the extraction formula to compute the stress intensity factor, then pose a PDE with a regular solution by imposing the nonhomogeneous boundary condition using the computed stress intensity factor, which converges with optimal speed. From the solution they could get an accurate solution just by adding the singular part. This approach uses the polar coordinate and the cut-off function to control the singularity and the boundary condition. In this paper we consider Poisson equations with multiple singular points, which involves different cut-off functions which might overlaps together and shows the way of cording in FreeFEM++ to control the singular functions and cut-off functions with numerical experiments.

• 전기학회논문지
• /
• 제68권4호
• /
• pp.593-597
• /
• 2019

We proposed a current Interruption type DC superconducting circuit breaker(I-DC SCB), a protection device that combines the current limiting technology of a superconductor with the cut-off technology of circuit breaker. Unlike existing protective devices, the current I-DC SCB is a device that combines two protection functions, notably improving failure probability and operational reliability. It is also applicable to all DC systems, such as HV, MV, and LVDC, due to the ease in capacity increase. The 100 kV I-DC SCB was designed after taking into account the actual power system conditions, followed by an analysis of the transient characteristics and the breaking range of the limiter. The results of the analysis showed that the I-DC SCB had a fault current limit of about 75% at the rated voltage, and completed the cut-off operation within about 20 ms.

• Geomechanics and Engineering
• /
• 제38권4호
• /
• pp.421-437
• /
• 2024

The soil nailing method entails the utilisation of nails to reinforce and stabilise a zone of soil mass. This is widely used for various applications due to its effective performance under various loading conditions. The seismic response of 6m high vertical soil-nailed cut in various site classes under dynamic excitations has been investigated in this study considering various lengths and inclinations of nails. The influence of frequency content of dynamic excitation on the response of structure has been assessed through finite element analysis using time history data of three different earthquakes. The seismic stability of the nailed cut in retaining soil in various sites under El Centro, Kobe and Trinidad earthquake ground motion is evaluated based on maximum acceleration response, maximum horizontal deformation, earth pressure distribution on the wall and maximum axial force mobilised in nails. The optimum nail inclination is identified as 15° and a minimum nail length ratio of 0.7 is essential for a stable vertical cut under dynamic excitations.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.225-231
• /
• 2003

In order to improve efficiency of a system with three-dimensional flow characteristics, this paper presents a new method that overcomes three-dimensional effects by using two-dimensional CFD and response surface method. The method was applied to shape optimization of cut-off in a multi-blade fan/scroll system. As the entrance conditions of two-dimensional CFD, the experimental values at the positions out of the inactive zone were used. In order to examine the validity of the two-dimensional CFD the distributions of velocity and pressure obtained by two-dimensional CFD were compared with those of three-dimensional CFD and experimental results. It was found that the distributions of velocity and pressure show qualitatively similarity. The results of two-dimensional CFD were used for constructing the objective function with design variables using response surface method. The optimal angle and radius of cut-off were determined as $72.4^{\circ}$ and 0.092 times the outer diameter of impeller, respectively. It is quantified the previous report that the optimal angle and radius of cut-off are approximately $72^{\circ}$ and 0.08 times the outer diameter of impeller, respectively.

• Journal of Microbiology and Biotechnology
• /
• 제28권4호
• /
• pp.503-509
• /
• 2018

Endive is widely consumed in a fresh-cut form owing to its rich nutritional content. However, fresh-cut vegetables are susceptible to contamination by pathogenic bacteria. This study investigated the antibacterial activities of the combined treatment of cinnamon leaf oil emulsion containing cetylpyridinium chloride or benzalkonium chloride (CLC and CLB, respectively) as a cationic surfactant and ultrasound (US) against Listeria monocytogenes and Escherichia coli O157:H7 on endive. The combined treatment of CLC or CLB with US reduced the population of L. monocytogenes by 1.58 and 1.47 log colony forming units (CFU)/g, respectively, and that of E. coli O157:H7 by 1.60 and 1.46 log CFU/g, respectively, as compared with water washing treatment. The reduction levels of both pathogens were higher than those observed with 0.2 mg/ml sodium hypochlorite. In addition, the combined treatment showed no effect on the quality of the fresh-cut endive (FCE). In particular, the degree of browning in FCE was less for the treatment group than for the control and water washing treatment groups. Thus, cationic surfactant-based cinnamon leaf oil emulsions combined with US may be an effective washing treatment for the microbial safety of FCE.