• Title/Summary/Keyword: 4-cut

Search Result 3,415, Processing Time 0.028 seconds

A Study of cut off effect of ultraviolet in sunglasses lens coated with nickel-ferrite thin film NxFe3-xO4 (니켈페라이트 박막 NxFe3-xO4를 이용한 선글라스 렌즈의 자외선 차단효과에 대한 연구)

  • Ha, T.W.;Lee, Y.H.;Choi, K.S.;Cha, J.W.
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.8 no.2
    • /
    • pp.25-29
    • /
    • 2003
  • Nickel-ferrite $Ni_xFe_{3-x}O_4$ thin films with several composition for Ni on glass substrate was prepared by ferrite plating method in order to make sunglass which cut off ultraviolet and shield electromagnetic field. It has single phase of polycrystalline spinel structure and has gloss as mirror and has high hardness which is no scratch while scraping by using nail. The transmittance of nickel-ferrite thin film is lowered to zero below 400 nm manifestly. And it shows that the nickel-ferrite thin film in nickel composition rate x = 0.09 was most cut oil ultraviolet when compared with goods of other company in the cut off effect of ultraviolet. Therefore, sunglasses coated with $Ni_xFe_{3-x}O_4$ thin film can be used in removing ultraviolet and electromagnetic field.

  • PDF

The change of validity of blood zinc protoporphyrin test by different cut-off level in lead workers (연취급 근로자들의 혈중 ZPP 농도 선별기준에 따른 정확도의 변화)

  • Kim, Yong-Bae;Ahn, Hyun-Cheol;HwangBo, Young;Lee, Gap-Soo;Lee, Sung-Soo;Ahn, Kyu-Dong;Lee, Byung-Kook
    • Journal of Preventive Medicine and Public Health
    • /
    • v.30 no.4 s.59
    • /
    • pp.741-751
    • /
    • 1997
  • Measurement of blood lead (PbB) and blood zinc protoporphyrin (ZPP) are most common biological indices to identify the individual at risk for excess or the health sequences by lead exposure. Because PbB is known most important and reliable index of lead exposure, PbB is often regarded as a gold standard to detect lead exposure. But in Korea PbB is a secondary test item of detailed health check-up with positive finding of screening test in most occasion. Our lead standard requires all lead workers to take annual heath-check twice a year for investigation of their health effect due to lead exposure. Blood ZPP is one of most important index to detect high lead absorption in lead workers as a screening test. Measurement of blood ZPP is known ,well to correlate with PbB in steady state of exposure in most lead workers and is often used as a primary screening test to detect high lead absorption of lead workers with the advantage of simplicity, easiness, portability and low cost. The current cut-off criteria of blood ZPP for further detailed health check-up is $100{\mu}g/d\ell$ which is supposed to match the level of $40{\mu}g/d\ell$ of PbB according to our standard. Authors tried to investigate the validity of current criteria of cut-off level $(100{\mu}g/d\ell)$ of blood ZPP and possible another better cut-off level of it to detect the lead workers whose PbB level over $40{\mu}g/d\ell$. The subjects in our study were 212 male workers in three small scale storage battery industries. Blood ZPP, PbB and hemoglobin (Hb) were selected as the indices of lead exposure. The results were as follows. 1. The mean of blood ZPP, PbB and Hb in lead workers were $79.5{\pm}46.7{\mu}g/d\ell,\;38.7{\pm}15.1{\mu}g/d\ell,\;and\;14.8{\pm}1.2g/d\ell$, respectively. There were significant differences in blood ZPP, PbB and Hb by industry (P<0.01). 2. The percents of lead workers whose blood ZPP were above $100{\mu}g/d\ell$ in the group of work duration below 1, 1-4, 5-9 and above 10 years were 8.6%, 17.2%, 47.6%, and 50.0%, respectively. The percents of lead workers whose PbB were above $40{\mu}g/d\ell$ in those were 31.4%, 40.4%, 71.4%, and 86.4%, respectively. 3. The percents of lead workers whose PbB were below $40{\mu}g/d\ell$, $40-59{\mu}g/d\ell$ and above $60{\mu}g/d\ell$ were 54.7%, 34.9% and 10.4%, respectively. Those of lead workers whose blood ZPP were below $100{\mu}g/d\ell$, $100-149{\mu}g/d\ell$ and above $150{\mu}g/d\ell$ were 79.2%, 13.7% and 7.1%, respectively. 4. Simple linear regression of PbB on blood ZPP was statistically significant (P<0.01) and as PbB was $40{\mu}g/d\ell$, blood ZPP was $82.1{\mu}g/d\ell$. 5. While the highest sensitivity and specificity of blood ZPP test to detect lead workers with PbB eve. $40{\mu}g/d\ell$ were observed in the cut-off level of $50{\mu}g/d\ell$ and $100{\mu}g/d\ell$ of blood ZPP, respectively, the highest validity (sensitivity+specificity) of blood ZPP to detect lead workers with PbB over $40{\mu}g/d\ell$ was observed in the cut-off level of around $70{\mu}g/d\ell$ of blood ZPP. But even with optimal cut-off level of around $70{\mu}g/d\ell$ of blood ZPP, still 25.0% of false negative and 20.7% false positive lead workers were found. As the result of this study, it was suggested that reconsideration of current blood ZPP cut-off of our lead standard from $100{\mu}g/d\ell$ to somewhat lower level such as around $70{\mu}g/d\ell$ and the inclusion of PbB measurement as a primary screening test for lead workers was highly recommended for the effective prevention of lead workers.

  • PDF

Iron Status of Pregnant Women and Evaluation of Cut-off Levels of Hb, Hct, TIBC, sTfR, sTfR:ferritin Ratio for Assessment of Iron Deficiency (임신여성의 철영양상태와 철결핍상태 판정을 위한 Hb, Hct, TIBC, sTfR 및 sTfR:ferritin 비의 임계수준 평가s)

  • 이종임;임현숙
    • Korean Journal of Human Ecology
    • /
    • v.4 no.1
    • /
    • pp.36-45
    • /
    • 2001
  • This study was performed to determine the changes of maternal iron status during pregnancy cross sectionally, and to evaluate the appropriateness of the cut-off points of hemoglobin (Hb). hematocrit (Hct), serum transferrin receptor (sTfR) and sTfR : ferritin ratio for assessing iron deficiency status based on serum ferritin level (< 12${\mu}g$/L). Serum Hb concentrations in the first trimester were significantly higher (p < 0.05) than those in the second and third trimester. Serum levels of iron and ferritin in the third trimester were significantly lower (p < 0.05) than those in the first and second trimester. On the other hand, sTfR:ferritin ratios in the third trimester were significantly higher (p < 0.05) than those in the first and second trimester. sTfR concentrations did not change significantly during pregnancy. The appropriate cut-off points of Hb were 11.5g/dL for whole period of pregnancy. 12.0g/dL for 1st trimester. and 11.5g/dL for both 2nd and 3rd trimester. The good cut-off points of Hct were 34% for whole period of pregnancy. 36% for 1st trimester. and 34% for both 2nd and 3rd trimester The suitable cut-off points of TIBC were 400${\mu}g$/dL for whole period of pregnancy. 360${\mu}g$/dL for 1st trimester, and 400${\mu}g$/dL for both 2nd and 3rd trimester. Any cut-off point of sTfR could not be selected because of its low sensitivity and specificity. The proper cut-off point of sTfR : ferritin ratio was 600 or 650 for all the periods determined except the first trimester. In conclusion, there were no reliable cut-off levels of sTfR and those of sTfR : ferritin ratio showed low specificity. The cut-off values of Hb and Hct for assessing iron deficiency were slightly higher than the values used to evaluate anemia. Thus, if appropriate cut-off levels were applied, Hb. Hct, or TIBC might be useful indices for evaluating iron deficiency as well as anemia.

  • PDF

An Emotion Classification Based on Fuzzy Inference and Color Psychology

  • Son, Chang-Sik;Chung, Hwan-Mook
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • v.4 no.1
    • /
    • pp.18-22
    • /
    • 2004
  • It is difficult to understand a person's emotion, since it is subjective and vague. Therefore, we are proposing a method by which will effectively classify human emotions into two types (that is, single emotion and composition emotion). To verify validity of te proposed method, we conducted two experiments based on general inference and $\alpha$-cut, and compared the experimental results. In the first experiment emotions were classified according to fuzzy inference. On the other hand in the second experiment emotions were classified according to $\alpha$-cut. Our experimental results showed that the classification of emotion based on a- cut was more definite that that based on fuzzy inference.

Analysis of Radio Frequency characteristics for Double Gate MOSFET (Double Gate MOSFET의 RF특성분석)

  • 김근호;고석웅;정학기
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2003.05a
    • /
    • pp.690-692
    • /
    • 2003
  • In this paper, we have investigated characteristics of radio frequency for double gate MOSFET with 50nm main gate in according to variation of side gate length. We could know the increasement of cut-off frequency as the side gate length is lower. As a result, we could know the most optimum performance characteristics when side gate length was 70nm. In this time, the DG MOSFET of side gate with 70nm has very high cut-off frequency like 41.4GHz.

  • PDF

Characteristics of Surface Roughness According to Wire Vibration Wire-cut Electric Discharge Machining of Aluminum Alloy 6061(II) (알루미늄 합금 6061에서 와이어 진동부가에 의한 와이어 컷 방전가공에 따른 표면 거칠기 특성(II))

  • Ryu, Cheong-Won;Choi, Seong-Dae
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.14 no.4
    • /
    • pp.100-107
    • /
    • 2015
  • Recently, high-efficiency machining in the production of high-value products with a complex shape has constantly been required with the need for hybrid machining. In this study, in addition to the wire-cut E.D.M. and vibration used to present the possibility of a hybrid process by carrying out the aluminum alloy experiment, the hybrid process determines the nature of the surface. The selected experimental parameters are horizontality, waveform, amplitude, peak current, and frequency. The experimental results give guidelines for selecting reasonable machining parameters. The surface roughness was improved by about 20% with increases in the amplitude of the vibration.

Analysis of Cutting Parameters for $Si_3 N_4$-hBN Machinable Ceramics Using Tungsten Carbide Tool (초경공구를 사용한 $Si_3 N_4$-hBN 머시너블 세라믹 가공에서 절삭 파라미터 분석과 결정)

  • 장성민;조명우;조원승;박동삼
    • Transactions of the Korean Society of Machine Tool Engineers
    • /
    • v.12 no.6
    • /
    • pp.36-43
    • /
    • 2003
  • In machining of ceramic materials, they are very difficult-to cut materials because of there high strength and hardness. Machining of ceramics are characterized by cracking and brittle fracture. Generally, ceramics are machined using conventional method such as finding and polishing. However these processes are generally costly and have low MRR(material removal rate). This paper focuses on determining the optimal levels of process parameters for products with CNC machining center. For this purpose, the optimization of cutting parameters is performed based on experimental design method. A design and analysis of experiments is conducted to study the effects of these parameters on the surface roughness by using the S/N ratio, analysis of ANOVA and F-test. Cutting parameters, namely, cutting speed, feed and depth of cut are optimized with consideration of the surface roughness.

Effects of the Suckers on Chemical Components of Leaves during Stalk-Cut Curing in Burley Tobacco (버어리종 대말림 건조 중 곁순처리에 따른 엽중 화학성분 변화)

  • 최상진;석영선
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.24 no.1
    • /
    • pp.32-37
    • /
    • 2002
  • This study was carried out to investigate the effects of suckers on chemical components with vertical and horizontal hanging method during stalk-cut curing in burley tobacco. The elongation and dry weights of suckers were increased until 14 days in vertical hanging method, and until 7days in horizontal hanging method after the beginning of curing. The contents of nicotine, protein-N and $NH_4$-N were decreased at treatment of more suckers during the curing. However, there was no significant difference by the hanging method. Solanone, damascenone, megastigmatrienone and 4-methyl phenol were increased gradually during curing. Those were increased with treatment of fewer suckers compared to treatment of more suckers. There was no significant difference by the hanging method.

Development of An Onion Peeler (I) - Root cutting equiment - (양파 박피기 개발(I))

  • 민영봉;김성태;정태상;최선웅;김정호
    • Journal of Biosystems Engineering
    • /
    • v.27 no.4
    • /
    • pp.301-310
    • /
    • 2002
  • With a purpose to manufacture an onion peeler, the root cutting equipment of the onion could be attached to a prototype onion peeler was developed. Before the experiment, the distribution of the dimensions of the Korean native onion were measured. And some types of the blades to cut and remove the root of the onion were designed and such characteristics as feasible revolution, conveying speed, and power requirement were investigated. From the result of the test, the selected one among the various cutters was the wing type blade with the round blade to cut out the root and with the vertical blade to cut a circular line. The optimum operating conditions of the wing type blade were revealed the revolution with no load was at 630 rpm, and the conveying speed was 0.08 m/s. Under these conditions, the maximum torque was 5.25 kg·m and the power requirement was 33 W, respectively.

Effects of cutting condition on surface roughness in the spiral up milling of aluminum alloy (알루미늄 합금의 스파이럴 상향가공 시 절삭조건이 표면거칠기에 미치는 영향)

  • Chun, Se-Ho
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.13 no.4
    • /
    • pp.83-90
    • /
    • 2014
  • The spiral up milling of an aluminum alloy was performed in this study. In accordance with the cutting condition, the surface roughness behavior and significance of the research with regard to specific factors were analyzed. The cutting speed, feed, and depth of the cut were found to be statistically significant. A higher cutting speed improved the surface roughness. On the other hand, as the feed and depth of the cut increase, the surface roughness decreases. An interaction effect between the feed and depth of the cut was detected. According to the surface roughness in relation to the cutting conditions, the model showed non-linear behavior.