• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.755-756
• /
• 2010

• 로봇학회논문지
• /
• 제11권4호
• /
• pp.193-204
• /
• 2016

This paper presents an anthropomorphic finger prosthesis for amputees whose proximal phalanx is mutilated. The finger prosthesis to be proposed is able to make the amputees to perform the natural motion such as flexion/extension as well as self-adaptive grasping motion as if normal human finger does. The mechanism of finger prosthesis with three degrees-of-freedom (DOFs) consists of two five-bar and one four-bar linkages. Two passive components composed of torsional spring and mechanical stopper and only one active joint are employed in order to realize an underactuation. Each passive component is installed into the five-bar linkage. In order to activate the finger prosthesis, it is required for the user to flex and extend the remaining proximal phalanx on the metacarpophalangeal (MCP) joint, not an electric motor. Thus the finger prosthesis conducts not only the natural motion according to his/her intention but also the grasping motion through the deformation of springs by the object for human finger-like behavior. In order to reveal the operation principle of the proposed mechanism, kinematic analysis is performed for the linkage design. Finally both simulations and experiments are conducted in order to reveal the design feasibility of the proposed finger mechanism.

• 한국정밀공학회지
• /
• 제28권7호
• /
• pp.851-858
• /
• 2011

Nanopositioning technologies play an important role in the progress of electronics, optics, bio-engineering and various nano-scale technologies. As a result, various practical nanopositioning methods have been successfully introduced. Flexure mechanism is a valuable method in nanopositioning because of smooth and friction-free motion and the infinitesimal movement near to sub-nm. In this study a modularized nanopositioner based on parallelogram four-bar linkage structure with right-circular flexure hinge was developed. The positioning performance of a single axis nanopositioner and a XY nanopositioner which was extended from single axis one were demonstrated using control experiments. Consequently, it was shown that the developed single axis nanopositioner possessed high performance and could be extended to various multi-axis nanopositioners.

• 한국지능시스템학회논문지
• /
• 제21권2호
• /
• pp.159-164
• /
• 2011

본 연구에서는 4절 링크 이론(four-bar linkage mechanism)과 얀센 메커니즘(Jansen mechanism)을 기반으로 다관절 보행 로봇(multi-legged walking robot)인 게(crab) 로봇을 제작하고, 게 로봇의 움직임에 대하여 기구학적인 해석을 제시한다. 제작된 게 로봇은 영상 획득을 위하여 카메라를 장착하였고, 장애물 회피를 위하여 3조의 초음파 센서를 가지고 있다. 또한 RF통신으로 외부에 영상 정보를 전달하며, Blue-tooth 통신 모듈을 장착하여 외부로부터 부여된 임무를 수행할 수 있다. 게 로봇의 설계와 제작을 하기 위해서 필요로 하는, 로봇 다리의 움직임을 알기 위해서는 관절 변수와 다리 끝단의 위치 및 자세와의 관계를 얻어야 한다. 따라서, 제안된 기구학적 해석은 로봇의 설계와 제작에 있어서 많은 도움을 주며 중요한 과정이다.

• 로봇학회논문지
• /
• 제12권2호
• /
• pp.107-115
• /
• 2017

In this paper, four-bar linkage mechanism for the knee joint is developed which is used in prosthetics. But unlike the prosthetics, the feature of this mechanism is that the instantaneous center of rotation of the four-bar linkages can be moved behind the ground reaction force vector so that it can be passively supported without any external power. In addition, this mechanism is developed similar to the structure of the human knee joint for eliminating the sense of heterogeneity of the wearer. In order to design the mechanism with these two objectives, optimization design process is done using the PIAnO tool and detailed design is carried out through optimized variable values. The developed mechanism is attached to the robot which can assist the hip and ankle joints. In order to verify the operation of the developed knee mechanism, an insole type sensor was attached to the shoes to compare data values before and after wearing the robot. Result data showed that wearer wearing the exoskeleton robot with the knee mechanism was the same value regardless of whether the heavy tool is loaded or not.

• 한국산업융합학회 논문집
• /
• 제16권4호
• /
• pp.141-145
• /
• 2013

This paper is the development of industrial robotic hand system and the design methods of industrial robot hand that can mimic human fingers motion. In order to overcome problems incurred during the reduction of the mobility, this study focuses on analyzing human hand structure and finger movements from an anatomical point of view. As a result, distinctive features that improve the discovered stability in constraints for range of motion in the fingers is reflected in this design concept. A 4-bar Linkage is used in robot finger structure. Lastly, there were experiments to inspect the developed robot hands performance. The developed robot hand has many potential applications and can be in many different fields.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2005년도 하계 학술대회 논문집
• /
• pp.21-25
• /
• 2005

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.271-272
• /
• 2013

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.833-839
• /
• 2010

In this paper, a novel 1 DOF hand rehabilitation robot is proposed in consideration of ADL training for stroke patients. To perform several ADL trainings, the proposed robot can move the thumb part and the part of 4 fingers simultaneously and realize the full ROM (Range of Motion) in grasp. Based on these characteristics, the proposed robot realizes several types of grasp such as cylindrical grasp, lateral grasp, and pinch grasp by using a passive revolute joint that can change the thumb movement direction. The movement of the thumb is driven by a cable mechanism and the part of 4 fingers is moved by a four-bar linkage mechanism.

• 제어로봇시스템학회논문지
• /
• 제22권4호
• /
• pp.307-314
• /
• 2016

Recently, demands on the tapping machine are increased due to the case of a cell phone is changed to metal such as aluminum. The automatic tool changer (ATC) is one of the most important devices for the tapping machine related to the speed and energy consumption of the machine. To reduce the consumed energy and vibration, the dynamic modeling is essential for the ATC. In this paper, inverse dynamic modeling of a novel ATC mechanism is introduced. The proposed ATC mechanism is composed of a double four-bar mechanism with a circular tablet to generate continuous rotation of the tablet. The dynamic modeling is performed based on the Lagrange equation with a modeling for the contact between the four-bar and the tablet. Simulation results for various working conditions are proposed and analyzed for the prototype design. The dynamic modeling can be applied to determine the proper actuator and to reduce the vibration and consumed energy for the ATC machine.