DOI QR코드

DOI QR Code

Development of a Passive Knee Mechanism for Lower Extremity Exoskeleton Robot

근력 지원용 외골격 로봇을 위한 수동형 무릎 관절 메커니즘 개발

  • Received : 2017.03.02
  • Accepted : 2017.05.04
  • Published : 2017.05.31

Abstract

In this paper, four-bar linkage mechanism for the knee joint is developed which is used in prosthetics. But unlike the prosthetics, the feature of this mechanism is that the instantaneous center of rotation of the four-bar linkages can be moved behind the ground reaction force vector so that it can be passively supported without any external power. In addition, this mechanism is developed similar to the structure of the human knee joint for eliminating the sense of heterogeneity of the wearer. In order to design the mechanism with these two objectives, optimization design process is done using the PIAnO tool and detailed design is carried out through optimized variable values. The developed mechanism is attached to the robot which can assist the hip and ankle joints. In order to verify the operation of the developed knee mechanism, an insole type sensor was attached to the shoes to compare data values before and after wearing the robot. Result data showed that wearer wearing the exoskeleton robot with the knee mechanism was the same value regardless of whether the heavy tool is loaded or not.

Keywords

References

  1. H.-D. Lee, and C.-S. Han, "Technical Trend of the Lower Limb Exoskeleton System for the Performance Enhancement", Journal of Institute of Control, Robotics and Systems, vol. 20, no. 3, pp. 364-371, March, 2014. https://doi.org/10.5302/J.ICROS.2014.14.9023
  2. W.-S. Kim, H.-D. Lee, D.-H. Lim, J.-S. Han and C.-S. Han, "Mechanical Design of the Hanyang Exoskeleton Assistive Robot (HEXAR)", International Conference on Control, Automation and Systems, Seoul, South Korea, pp. 479-484, 2014.
  3. W. Van Dijk, H. Van Der Kooij and Edsko Hekman, "A Passive Exoskeleton with Artificial Tendons: Design and Experimental Evaluation", IEEE International Conference on Rehabilitation Robotics, Zurich, Switzerland, July, 2011.
  4. Andrew Valienete, "Design of a Quasi-Passive Parallel Leg Exoskeleton to Augment Load Carrying for Walking", Master's Thesis, 2005.
  5. Aaron J. Young and Daniel P. Ferris, "State-of-the-art and Future Directions for Lower Limb Robotic Exoskeletons", IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 25, no. 2, pp. 171- 182, 2016. https://doi.org/10.1109/TNSRE.2016.2521160
  6. Harrison P. Crowell, Angela C. Boynton, and Michael Mungiole, 2002, 11, "Exoskeleton Power and Torque Requirements Based on Human Biomechanics," [Online]. Available: https://permanent.access.gpo.gov/gpo2634/ARLTR-2764.pdf
  7. C. Kirtley, Clinical gait analysis: theory and practice, Elsevier Health Sciences, 2006, pp. 170-173.
  8. RE. Stewart and A. Staros, "Selection and Application of Knee Mechanisms," Prosthetic and Sensory Aids Service, Medical Research in the Veterans' Administration, United States, 1972, pp. 90-158.
  9. Juan Jose Munoz-Cesar and Luis Hector Hernandes- Gomez, "Optimization of the Design of a Four Bar Mechanism for a Lower Limb Prosthesis Using the Taboo Search Algorithm", Advances in Bio-Mechanical Systems and Materials, August, vol. 40, pp.107-125, 2013.
  10. P.S. Walker, H. Kurosawa, J.S. Rovick, and R.A. Zimmerman, "External Knee Joint Design Based on Normal Motion", Journal of Rehabilitation Research and Development, vol. 22, pp. 9-22, 1985. https://doi.org/10.1682/JRRD.1985.01.0009
  11. C.W. Radcliffe, "Four-bar Linkage Prosthetic Knee Mechanisms: Kinematics, Alignment and Prescription Criteria", Prosthetics and Orthotics International, pp. 159-173, 1994.
  12. Progress Integration, Automation and Optimization - PIAnO User's Manual, FRAMAX Inc., 2009.
  13. K.-J. Hong, M.-S. Kim, and D.-H. Choi, "Efficient Approximation Method for Constructing Quadratic Response Surface Model", Journal of Mechanical Science and Technology, vol. 15, pp. 876-888, July, 2001.

Cited by

  1. Knee Exoskeletons Design Approaches to Boost Strength Capability: A Review vol.11, pp.21, 2017, https://doi.org/10.3390/app11219990