• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.147-155
• /
• 1996

The purpose of present paper is to estimate the static and fatigue bending strengths of CFRP(carbon fiber reinforced plastic) laminates having impact damage(FOD). The specimens which are formed with the different stacking composition, EPOXY and PEEK matirx and orthotropic and quasi-isotropic laminated plates, are prepared for this experiment. A steel ball is impacted on CFRP laminates, generating impact damages, and the three-point fatigue bending test is carried out by using the impacted laminates to investigate the influence of the stackin composition on the fatigue strength of CFRP laminates.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1078-1083
• /
• 2002

Ceramics are significantly used in many industrial applications due to their excellent mechanical and thermal properties such as high temperature strength, low density, high hardness, low thermal expansion, and good corrosion resistive properties, while their disadvantages are brittleness, poor formability and high manufacturing cost. To combine advantages of ceramics with those of metals, they are often used together as one composite component, which necessiates reliable joining methods between metal and ceramic. Direct brazing using an active filler metal has been found to be a reliable and simple technique, producing strong and reliable joints. In this study, the fracture characteristics of Si$_3$N$_4$ ceramic joined to ANSI 304L stainless steel with a Ti-Ag-Cu filler and a Cu (0.25-0.3 mm) interlayer are investigated as a function of strain rate and temperature. In order to evaluate a local strain a couple of strain gages are pasted at the ceramic and metal sides near joint interface. As a result the 4-point bending strength and the deflection of interlayer increased at room temperature with increasing strain rate. However bending strength decreased with temperature while deflection of interlayer was almost same. The fracture shapes were classified into three groups ; cracks grow into the metal-brazing filler line, the ceramic-brazing filler line or the ceramic inside.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.59-68
• /
• 1997

Recently, the cases of using bonded dissimiliar materials which have each of the different components tend to increase for the purpose of developing new materials and using the special objects in the field of industry. Among the cases the strength evaluation of the joining materials of vehicle engine and the structural materials with ceramic/metal bonded joints becomes more important. But the residual stress occurs, because the joining of ceramics and metals is performed in extremely high temperature. It becomes a dominant cause to reduce the strength of the ceramic/metal bonded joints. In this paper, strength evaluation method of ceramic/metal bonded joints considering stress singularity was investigated by boundary element method and 4-point bending test. An advanced method of quantitative strength evaluation for ceramin/metal bonded joints is to be suggested.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.921-924
• /
• 2004

This paper is to investigate a crack for plasma sprayed MCrAlY coated material by acoustic emission method in 4-point bending test. The CoNiCrAlY is coated on Inconel-718 by vacuum plasma spray process. Micro-hardness measurement was conducted by means of Micro Vickers-hardness indentor. The porosity of coating layer was measured using a SEM and Image Analyzer. AE monitoring system is composed of PICO type sensor, a wide band preamplifier(40dB), a PC and AE DSP(16/32 PAC) board. The AE count, Hit and energy of coating specimens is measured according to coating thickness.

• 한국광학회지
• /
• 제12권4호
• /
• pp.289-293
• /
• 2001

금속 모세관을 이용하여 일반적인 단일모드 광섬유를 결합함으로써 매크로 벤딩(macro bending)을 측정할 수 있는 광섬유 센서를 제작하였다. 매크로 벤딩에 의한 곡률 반지름이 감소함에 따라 각도 정렬 오차가 증가하여 투과되는 빛의 에너지가 감소하게 되므로 매크로 벤딩을 측정할 수 있었다. 측정 범위는 곡률 반지름 20mm에서 85mm의 영역이었다. 사용한 광섬유 격자의 중심 파장은 각각 1543.3 nm, 1549.5nm이고 최대 벤딩 손실을 -11.19dB였다. 이 센서와 광섬유 브래그 격자를 이용하여 다중점 측정이 가능함을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권4호
• /
• pp.318-326
• /
• 2013

소나무와 스프루스재를 사용하여 핑거공차를 0.15 mm로 고정하고 핑거피치 4.4 mm (Type S)와 6.8 mm(Type L)의 2종류 및 레조시놀 페놀 수지 접착제 및 수용성 비닐 우레탄 수지접착제로 2종류의 사용하여 종접합시키고 또한 2본의 종접합재를 이용하여 횡방향으로 핑거접합부를 양쪽으로 이동시키면서 접착하여 핑거접합부위의 배치거리를 접합재의 두께를 기준으로 하중점 중앙으로부터 양쪽 핑거접합부까지의 거리를 접합재 두께의 비율($R_t$) 0, 1.5, 2, 2.5, 3배의 5조건으로 제조하여 3점 중앙집중식 휨강도성능시험을 한 결과는 다음과 같다. 1) 휨탄성계수는 핑거접합부의 위치 이동과 관계없이 접착제의 종류, 핑거의 형상에 따른 영향은 나타나지 않았다. 2) 휨강도는 접착제의 종류, 핑거의 형상에 관계없이 하중점 중앙에서부터 멀어질수록 거의 직선적으로 증가하였으며 핑거접합부가 소재두께 비율의 3배에서는 소재와 같은 값을 나타내었다. 3) 시험편의 파괴는 하중점 중앙에서부터의 핑거접합부까지의 거리가 두께의 비율이 0, 1.5배에서 모두 핑거접합부에서 파괴되었으며 거리가 멀어질수록 접합부에서의 파괴가 적게 일어나다가 두께비율의 3배에서는 전혀 나타나지 않았다.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.121-128
• /
• 1998

In this study, when tension and bending stress act on plate simultaneously, stress intensity factor is analyzed at crack tip with using BEM(Boundary Element Method). In this analysis, stress intensity factors(S.I.F) are defined for variable ligament, aspect and stress ratio($\sigma$T/$\sigma$B). Consequently, predicted that crack grow to depth direction at low aspect and ligament ratio in tension stress and to surface direction in bending stress. Tension and bending stress act on plate same time, effect of tension stress in the first stage and effect of bending stress in the after stage was to observed. The outbreak of secondary crack in backside is under the control of stress amplitude and predict that the point of outbreak is mear backside.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2071-2081
• /
• 1995

In order to examine the effects of yield stress, tensile strength and thickness on the buckling behavior during bending of pipes, the nonlinear finite element analysis of the 3-point bending tests was carried out using the commercial software (ABAQUS) under the condition of L4(2$^{3}$) performed according to the designed condition. Form the analysis of simulation results, it was found that yield stress and thickness were the major factors on buckling load at pipe bending and tensile strength gave little influence because the plastic strain and plastic zone are small. For the punch displacement to the occurrence of buckling, thickness is a major factor and yield stress and tensile strength are the minor factors.

• Journal of Biosystems Engineering
• /
• 제18권1호
• /
• pp.15-20
• /
• 1993

Wearness has been a major failure criterion in Korean-made rotary blade. However, few studies have been conducted to improve it. In this study, the fundamental data obtained from the measurement of wearness and failure of rotary blade were analyzed to provide a guideline for the design of rotary blades. For the straight part(about 20-23 em from bolt hole) from the bolt hole to bending point of rotary blade, modifications were proposed for improvements, however, for the portion from bending point to tip was made no design recommendations because the failure behavior of that portion was difficult to analyze with the experimental data. The results are summarized as follows. 1. The current V-shape section has to be moved about 5 em toward the bending point of rotary blade. 2. The section modulus at the portion about 5-7 em distant from bolt hole has to be increased about 15-20 %. 3. The V-shape section has to be changed into U-shape to reduce the on account of recieving initial stress in blades. 4. The radius of curvature of the neck(the portion about 5-7 cm apart from bolt hole) has to be made larger to decrease the stress concentration.

• The Journal of Advanced Prosthodontics
• /
• 제9권6호
• /
• pp.439-446
• /
• 2017

PURPOSE. To evaluate the effects of different surface treatments on the bond strength of novel CAD/CAM restorative materials to resin cement by four point bending test. MATERIALS AND METHODS. The CAD/CAM materials under investigation were e.max CAD, Mark II, Lava Ultimate, and Enamic. A total of 400 bar specimens ($4{\times}1.2{\times}12mm$) (n=10) milled from the CAD/CAM blocks underwent various pretreatments (no pretreatment (C), hydrofluoric acid (A), hydrofluoric acid + universal adhesive (Scotchbond) (AS), sandblasting (Sb), and sandblasting + universal adhesive (SbS)). The bars were luted end-to-end on the prepared surfaces with a dual curing adhesive resin cement (Variolink N, Ivoclar Vivadent) on the custom-made stainless steel mold. Ten test specimens for each treatment and material combination were performed with four point bending test method. Data were analyzed using ANOVA and Tukey's test. RESULTS. The surface treatment and type of CAD/CAM restorative material showed a significant effect on the four point bending strength (FPBS) (P<.001). For LDC, AS surface treatment showed the highest FPBS results ($100.31{\pm}10.7MPa$) and the lowest values were obtained in RNC ($23.63{\pm}9.0MPa$) for control group. SEM analyses showed that the surface topography of CAD/CAM restorative materials was modified after treatments. CONCLUSION. The surface treatment of sandblasting or HF acid etching in combination with a universal adhesive containing MDP can be suggested for the adhesive cementation of the novel CAD/CAM restorative materials.