• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.5
• /
• pp.466-472
• /
• 2013

In this paper, we propose a gait generation method for a quadruped robot using the waist joints which can minimize the body shake during the locomotion. In this proposed method, we first calculate the hip coordinate of tilted body using the geometrical model of a quadruped robot, and then move the CoG(Center of Gravity) of a quadruped robot using 2-DOF waist joints to minimizes the body shake. In addition, the gait of a quadruped robot is generated based on the wave gait method. Finally, we verify the effectiveness of the proposed method by comparing with that of the previous method through the computer simulations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.211-212
• /
• 2014

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.623-624
• /
• 2011

• Interaction and multiscale mechanics
• /
• v.4 no.4
• /
• pp.257-271
• /
• 2011

The analysis of interfacial stresses in structural component has been the subject of several investigations but it still requires more effort and studies. In this study a general three-dimensional interface element has been formulated for stress and displacement analyses in the interfacial area between two adjacent plate bending element and brick element. Interface element has 16 nodes with 5 degrees of freedom (DOF) in each node adjacent to plate bending element and 3 DOF in each node adjacent to brick element. The interface element has ability to transfer three translations from each side of interface element and two rotations in the side adjacent to the plate element. Stiffness matrix of this element was formulated and implemented in three-dimensional finite element code. Application of this element to the reinforced concrete (RC) beam strengthened with fiber reinforced polymer (FRP) including variation of deflection, slip between plate and concrete, normal and shear stresses distributions in FRP plates have been verified using experimental and numerical work of strengthened RC beams carried out by some researchers. The results show that this interface element is effective and can be used for structural component with these types of interface elements.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.309-316
• /
• 2018

In this study, we propose a 3D virtual reality based presentation training system to help implement the virtual presentation environment, such as the real world, to present it confidently in the real world. The proposed system provided a realistic and highly engaging presentation and interview environment by analyzing the speakers' voice and behavior in real time to be reflected in the audience of the virtual space. Using HMD and VR Controller that become 6DOF Tracking, the presenter can change the timing and interaction of the virtual space using Kinect, and the virtual space can be changed to various settings set by the user. The presenter will look at presentation files and scripts displayed in separate views within the virtual space to understand the content and master the presentation.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.319-325
• /
• 2017

In this study, we optimized the coffee extraction conditions for instant coffee production in two stage percolators, which is the most common coffee extractor for instant coffee production. A central composite design was used to build mathematical model equations for response surface methodology (RSM). In these equations, the yield and overall acceptability of the coffee extracts were expressed as second-order functions of three factors, the feed water temperature, draw-off factor (DOF), and extraction time (cycle time). Based on the result of RSM, the optimum conditions were obtained with the use of desirability function approach (DFA) which find the best compromise area among multiple options. The optimum extraction conditions to maximize the yield and overall acceptability over 40% of yield were found with $163^{\circ}C$ of feed water temperature, 4.3 of DOF and 27 minutes of extraction time (cycle time). These results provide a basic data for the coffee extraction conditions for the competitive instant coffee in the industry.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.7
• /
• pp.134-141
• /
• 2009

Recently, many researchers have tried to develop wearable robots for various fields such as medical and military purposes. We have been studying robotic exoskeletons to assist the motion of persons who have problems with their muscle function in daily activities and rehabilitation. The upper-limb motions (shoulder, elbow and wrist motion) are especially important for such persons to perform daily activities. Generally for shoulder motion 300F is needed to describe its motion(extension/flexion, abduction/adduction, internal/external rotation) but we have used a redundant actuator thus making a 4 DOF system. In this paper, we proposed the mechanism design of the exoskeleton which consists of 4-DOF for shoulder and 1-DOF for elbow robotic exoskeleton to assist upper-limb motion. Then we compared the new mechanism design and prototype mechanism design. Here we also analyze the proposed system kinematically to find out and to avoid the singular point. This research will ensure that the proposed wearable robot system make human's motion more powerfully and more easily.

• Wind and Structures
• /
• v.25 no.4
• /
• pp.343-360
• /
• 2017

The post-flutter state of streamlined steel box girder is studied in this paper. Firstly, the nonlinear aerodynamic self-excited forces of the bridge deck cross section were investigated by CFD dynamic mesh technique and then the nonlinear flutter derivatives were identified on this basis. Secondly, based on the 2-degree-of-freedom (DOF) coupling flutter theory, the torsional amplitude and the nonlinear flutter derivatives were introduced into the traditional direct flutter calculation method, and the original program was improved to the "post-flutter state analysis program" so that it can predict not only the critical flutter velocity but also the movement of the girder in the post-flutter state. Finally, wind tunnel tests were set to verify the method proposed in this paper. The results show that the effect of vertical amplitude on the nonlinear flutter derivatives is negligible, but the torsional amplitude is not; with the increase of wind speed, the post-flutter state of streamlined steel box girder includes four stages, namely, "little amplitude zone", "step amplitude zone", "linearly growing amplitude zone" and "divergence zone"; damping ratio has limited effect on the critical flutter velocity and the steady state response in the post-flutter state; after flutter occurs, the vibration form is a single frequency vibration coupled with torsional and vertical DOF.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.2
• /
• pp.172-181
• /
• 2012

One of the most critical issues in naval architecture these days is the operational safety. Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions is the first to ensure for both commercial and military vessels. Unlike the intact stability cases, the assessment of the damaged ship stability is very complicated physical phenomena. Therefore it is widely acknowledged that computational fluid dynamics (CFD) methods are one of most feasible approaches. In order to develop better CFD methods for damaged ship stability assessment, it is essential to perform well-designed model tests and to build a database for CFD validation. In the present study, free roll decay tests in calm water with both intact and damaged ships were performed and six degree-of-freedom (6DOF) motion responses of intact ship in regular waves were measured. Through the free roll decay tests, the effects of the flooding water on the roll decay motion of a ship were investigated. Through the model tests in regular waves, the database that provides 6DOF motion responses of intact ship was established.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.77-87
• /
• 2022

The Precision Aerial Delivery System is an instrument designed to improve the poor landing accuracy of aerial delivery system with conventional circular parachutes, and is equipped with an Airborne Guidance Unit to safely transport supplies to the desired destination. Currently, the landing accuracy of the PADS product is reported as CEP₅₀ 100m and also differs significantly, depending on the actual topography and weather environment. In this study, HILS was constructed based on the 6DOF nonlinear modeling of PADS to analyze the maneuver characteristics of Ram Air Parachute under wind environments. By using the new algorithm a precision soft landing algorithm including Energy Management and Final Approach is designed. HILS results show that it is possible to achieve a precise soft landing within CEP₅₀ 40m, and it can be exploited to develop an actual PADS drop test.