• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2005

This paper presents the experimental results measured by photoelastic 4-step phase shifting method for the isochromatic fringe distribution in a TV glass panel. In the conventional photoelastic method, the isochromatic fringe orders are measured manually point by point. The 4-step phase shifting method uses four images obtained from a circular polariscope by rotating the analyzer to $0^{\circ},\;45^{\circ},\;90^{\circ}$, and $135^{\circ}$. In order to use the 4-step phase shifting method, the elements of a polariscope should be aligned to isoclinic direction at a point and/or along a line where isochromatic fringe distribution is measured. Experimental results obtained from the 4-step phase shifting method are compared with those measured by the Senarmont compensation method. Both results are well agreed. Then, isochromatic fringe distributions in the TV glass panel that is heat-treated before and after are compared. Maximum and minimum isochromatic fringe orders in the TV glass panel with before- and after-heat treatment are changed approximately two times.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.1
• /
• pp.38-44
• /
• 2004

An experimental study for a crane hook was performed to investigate the stress distribution along a certain line where the maximum and minimum stresses to be developed. On this line, the isoclinic fringe and/or principal stress direction is constant. The crane hook was modeled into a 2-dimensional plate made of urethane rubber called 'Photoflex' The Photoflex is very sensitive to a load and has low photoelastic fringe constant. The Tardy compensation method with the fringe sharpening process and the 4-step phase shifting method, was used for the photoelastic technique. Experimental results by photoelasticity were compared with the calculated stresses from the simple curved beam theory and tile finite element analysis. Ail the results were close to each other.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.226-230
• /
• 2001

Electronic Speckle Pattern Interferometry (ESPI) has been recently developed and widely used because it has advantage to be able to measure surface deformations of engineering components and materials in industrial areas with non-contact. The spekle patterns to be formed with interference phenomena of scattering phenomena measure the out-of-plane deformations, together with the use of digital image equipment to process the informations included in the speckle patterns and the display consequent interferogram on a computer monitor. In this study, the experimental results of a canti-levered plate using ESPI were compared with those obtained from the simple beam theory. The ESPI results of the canti-levered plate analyzed by 4-step phase shifting method are close to the theoretical expectation. Also, out-0of-plane displacements of a spot welded canti-levered plate were measured by ESPI with 4-step phase shifting technique. The phase map of the spot welded canti-levered plate is quite different from that of the canti-levered plate without spot welding.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.178-178
• /
• 2004

본 연구에서는 폴리카보나이트의 재료로 만들어진 인장시편과 원형시편을 다목적 광탄성 측정기를 사용하여 프린지 차수를 측정한 후 프린지 상수를 도출하였다. 특히, 새로 개발된 다목적 광탄성기를 이용하여 지랫대 형식으로 프린지 차수를 측정하였고, 시편에 직접 응력을 가하는 방식의 직접(DIRECT) 실험법으로 프린지 차수를 측정하였다. 위와 같은 방식은 나타난 결과를 가지고 프린지 상수를 서로 비교할 수 있다는 장점이 있어 다목적 광탄성기에 대한 신뢰도를 얻을 수 있다 아울러 광탄성 4단계 위상 이동법에서는 주응력 방향, 즉 등경선이 일정한 선상에서는 연속적인 응력분포를 얻을 수 있다.(중략)

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.189-196
• /
• 2001

Photoelasticity is one of the most widely used methods for whole field stress analysis. In photoelasticity, the difference and the directions of the principal stresses we given isochromatic and isoclinic fringe patterns. Conventionally, principal stress directions are measured manually by relating the polarizer and analyzer of a plane polariscope at the same time. This is known to be the Tardy compensation method. This measurement can be very tedious and time consuming in whole field analysis. It is not possible to separate isoclincs from photoelastic fringes by conventional photoelastic technique. In this study, photoelastic theory is represented by Jones matrices and 4-steps and 8-steps phase shifting methods are described A feasibility study using computer simulation is done to separate isoclincs and isochomatics from photoelastic fringes of a circular disk under diametrical compression. Fringe patterns of the disk are generated using stress optic law. The magnitudes of isoclincs and isochromatics obtained from 8-step phase shifting method are compared with those of theories. From computer simulation, it is verified to separate isoclincs and isochomatics from photoelastic fringes.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.66-72
• /
• 2002

Electronic Speckle Pattern Interferometry (ESPI) has been recently developed and widely used because it has advantage to be able to measure surface deformations of engineering components and materials in industrial areas with non-contact. The speckle patterns to be formed with interference and scattering phenomena can measure not only out-of-plane but also in-plane deformations, together with the use of digital image equipment to process the informations included in the speckle patterns and to display consequent interferogram on a computer monitor. In this study, the experimental results of a canti-levered plate using ESPI were compared with those obtained from the simple beam theory. The ESPI results of the canti-levered plate analyzed by 4-step phase shifting method are close to the theoretical expectation. Also, out-of-plane displacements of a spot welded cacti-levered plate were measured by ESPI with 4-step phase shifting technique. The phase map of the spot welded cacti-levered plate is quite different from that of the canti-levered plate without spot welding.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.264-264
• /
• 1994

본 연구는 보리 씨앗에 존재하는 리보솜 불활성화 단백질(RIP) 의 삼차원 구조를 X-선 결정학 방법을 이용하여 밝히고, 그 결과로 분자 차원에서 기능을 이해하는 것을 목적으로 하고있다. 리보솜불활성화 단백질은 N-glucosidase 반응을 통하여 단백질 합성을 저해하기 때문에 세포를 죽일 수 있다. 따라서 암세포만을 특정적으로 인식하는 다른 물질과 결합시키면 암세포만을 특정적으로 죽일 수 있는 면역독소로 이용될 수 있다. 또, 최근에는 항바이러스의 작용을 함이 밝혀져 많은 연구가 진행되고 있다. 단백질 삼차원 구조 규명을 위해서는 여러가지 단계가 있는데 지난 번 과제까지 성공적으로 리보솜 불활성화 단백질의 대량 분리와 X-선 결정학의 필수 요건 좋은 결정을 길렀고, 이번에는 구조 해석을 위해 꼭 해결해야하는 위상문제를 극복하기 위하여 여러가지 실험을 진행하였다. 우선, 비슷한 구조인 피마자씨에서 분리한 Ricin의 A-체인과 미국자리공 잎에서 분리한 Pokeweed antiviral protein의 삼차원 분자좌표를 이용하여 분자치환법으로 위상문제 해결을 시도하였다. Ricin 의 A-체인을 이용하였을 때 분자의 위치가 정확히 찾아지지 않았고, 다른 모델인 Pokeweed antiviral protein을 이용하여 X-PLOR 프로그램내의 PC refinement법으로 분자치환을 시도하였다. Euler각도로 (187.37, 22.5, 311.94) 의 회전해 (Rotation solution) 를 가지고 있었고, 이러한 해에 맞추어서 분자를 돌려둔 후, 이동해 (Transaltion solution) 을 구해서 그 위치 (Orientation) 로 분자를 이동하였다. 이 때 R값은 53.9 % (8.0 - 3.5$\AA$) 이였고, 부분좌표 (Fractional coorcdinate) 에서는 0.102, 0.000, 0.261 이고, 직교좌표 (Orthogonal coorclinate) 에서는 4.616, 0.000, 13.167 의 결과를 얻었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1387-1394
• /
• 2014

In a photoelastic experiment, it is necessary to know the material stress fringe constant of the photoelastic specimen to determine the stresses from the measured isochromatic fringe orders. The material stress fringe constant can be obtained using a simple tension specimen and/or a circular disk under diametric compression. In these methods, there is generally a need to apply numerous loads to the specimen in response to the relationship of the fringe order. Then, the least squares method is used to obtain the material constant. In this paper, the fringe orders that appear on a four-point bending specimen are used to determine the fringe constant. This method requires four photoelastic fringes obtained from a circular polariscope by rotating the analyzer to 0, ${\pi}/4$, ${\pi}/2$, and $3{\pi}/4$ radians. Using the four-point bending specimen to determine the material stress fringe constant has an advantage because measurements can be made at different locations by applying a constant load. The stress fringe constant measured with this method is within the range suggested by the manufacturer of the photoelastic material.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.179-179
• /
• 2004

최근 산업계 기술 동향은 첨단화, 고정도화 그리고 초소형화하고 있으며, 초정밀 가공 기술(nano technology)의 발전에 따른 고정밀의 계측기술이 요구되고 있는 실정이며, 기계구조 재료가 다양한 조건 하에서 사용되어지고 있다. 이에 따라 새로운 정밀계측기술 또한 급속히 발전하고 있으며, 특히 비접촉 정밀 계측 분야에서는 레이저(laser)를 이용한 광계측 방법이 선호되고 있다. 레이저를 이용한 비접촉 계측방법은 기계구조물의 미소하중, 미소균열검출, 미소변형계측, 정밀계측 등의 분야에 장점을 가지고 있어 관심이 높아지고 있다.(중략)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.71-79
• /
• 1992

In general, the accelerogram of earthquake ground motion or the accelerogram obtained from dynamic tests contain various errors. In these errors of the accelerograms, there are instrumental errors(magnitude and phase distortion) due to the response characteristics of accelerometer and the digitizing error concentrated in low and high frequency components and random errors. Then, these errors may be detrimental to the results of data processing and dynamic analysis. An efficient method which can correct the errors of the accelerogram is proposed in this study. The correction of errors can be accomplished through four steps as followes ; 1) using an interpolation method a data form appropriate to the error correction is prepared, 2) low and high frequency errors of the accelerogram are removed by band-pass filter between prescribed frequency limits, 3) instrumental errors are corrected using dynamic equilibrium equation of the accelerometer, 4) velocity and displacement are obtained by integrating corrected accelerogram. Presently, infinite impulse response(IIR) filter and finite impulse response (FIR) filter are generally used as band-pass filter. In the proposed error correction procedure, the deficiencies of FIR filter and IIR filter are reduced and, using the properties of the differentiation and the integration of Fourier transform, the accuracy of instrument correction and integration is improved.