• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.89-89
• /
• 2010

The atomic structure of Sb/Si(5 5 12)-$2{\times}1$ surface, deposited at room temperature (RT) and post-annealed, has been identified by scanning tunneling microscopy and the corresponding interface has been studied by synchrotron core-level photoemission spectroscopy. With 0.3-nm Sb deposition at RT and postannealing at $600^{\circ}C$, the surface has been facetted to (225)-$2{\times}1$ and (112)-$1{\times}1$, and its Si 2p has shown that all the Si 2p surface components have disappeared, while the single Sb-Si interfacial component has appeared. Such results indicate that all of surface Si atoms are replaced by Sb atoms and the charge is transferred from Si to passivating Sb-atoms at the top layer. With subsequent postannealing up to $700^{\circ}C$, the surface has been facetted to (113)-$2{\times}2$ and (335)-$4{\times}2$, still having Sb-Si interfacial component and partially re-exposed Si surface components. From the present study, the role of surfactant atom, Sb, as well as the thermal-stabilization of Sb-passivated high-index Si surface will be exposed. Especially, the key role of the Sb/Si(113)-$2{\times}2$, composed of Rebonded-Dimer-Rebonded atom 1D structures, for stabilization will be discussed.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.104-111
• /
• 2013

Poymer blends of two degradable aliphatic polyesters, relatively expensive material polylactic acid (PLA) and relatively inexpensive material poly(butylene adipate-co-terephthalate) (PBAT), were used in this study. Three different kinds of modifiers were used with various amounts. Diisocyanate type methylenediphenyl 4,4'-diisocyanate (MDI) and hexamethylene diisocyanate (HDI) were used as modifiers and epoxy type coupling agents also used. The melt flow index (MFI) and dynamic viscoelasticity of various compositions of PLA/PBAT blends were studied. The mechanical property and morphology with respect to the fracture surface of PLA/PBAT blends were also investigated using tensile test and field emission scanning electronic microscopy, respectively. These tests were also used to verify the compatibility of PLA/PBAT and the effect of mechanical properties due to the use of modifiers. Tensile properties of PLA/PBAT blends modified with HDI were improved remarkably.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.249-249
• /
• 2015

Silver films have been of considerable interest for years due to their better performance relative to other metal films for engineering applications. A series of multi-layer silver coatings with different thickness (i.e. 0.3 um to 1.5 um) were prepared on Aluminium substrate containing copper undercoat by direct current (DC) magnetron sputtering method. For the comparative purpose, similar thickness silver coatings were prepared by electrolytic deposition method. Microstructural, morphological, and mechanical characteristics of the silver coatings were evaluated by means of scanning electron microscope (SEM), X-ray diffraction (XRD), Surface roughness test, microhardness test and nano-scratch test. From the results, it has been elucidated that the silver films prepared by DC magnetron sputtering method has superior properties in comparison to the wet coating method. On the other hand, DC magnetron sputtering method is relatively easier, faster, eco-friendly and more productive than the electrolytic deposition method that uses several kinds of hazardous chemicals for bath formulation. Therefore, a New Work Item Proposal (NWIP) for the test methods standardization of DC magnetron sputtered silver coatings has recently been proposed via KATS, Korea and a NP ballot is being progressed within a technical committee "ISO/TC107-metallic and other inorganic coating".

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.18-30
• /
• 2010

As the automobile industry is developing, the number of deaths and injuries has increased. To reduce the damages from automobile accidents, the government of each country proposes experimental conditions for reproducing the accident and establishes the vehicle safety regulations. Automotive manufacturers are trying to make safer vehicles by satisfying the requirements. The Hybrid III crash test dummy is a standard Anthropomorphic Test Device (ATD) used for measuring the occupant's injuries in a frontal impact test. Since a real crash test using a vehicle is fairly expensive, a computer simulation using the Finite Element Method (F.E.M.) is widely used. Therefore, a detailed and robust F.E. dummy model is needed to acquire more accurate occupant injury data and behavior during the crash test. To achieve this goal, a detailed F.E. model of the Hybrid III 5th percentile female dummy is constructed by using the reverse engineering technique in this research. A modeling process is proposed to construct the F.E. model. The proposed modeling process starts from disassembling the physical dummy. Computer Aided Design (CAD) geometry data is constructed by three-dimensional (3-D) scanning of the disassembled physical dummy model. Based on the geometry data, finite elements of each part are generated. After mesh generation, each part is assembled with other parts using the joints and rigid connection elements. The developed F.E. model of dummy is simulated based on the FMVSS 572 validation regulations. The results of simulation are compared with the results of physical tests.

• Corrosion Science and Technology
• /
• v.14 no.5
• /
• pp.239-246
• /
• 2015

Stainless steel is generally known to have characteristics of excellent corrosion resistance and durability, but in a marine environment it can suffer from localized corrosion due to the breakdown of passivity film due to chloride ion in seawater. Furthermore, the damage behaviors are sped up under a cavitation environment because of complex damage from electrochemical corrosion and cavitation-erosion. In this study the characteristics of electrochemical corrosion and cavitation erosion behavior were evaluated on 16.7Cr-10Ni-2Mo stainless steel under a cavitation environment in natural seawater. The electrochemical experiments have been conducted at both static conditions and dynamic conditions inducing cavitation with different current density parameters. The surface morphology and damage behaviors were compared after the experiment. After the cavitation test with time variables morphological examinations on damaged specimens were analyzed by using a scanning electron microscope and a 3D microscope. the galvanostatic experiment gave a cleaner surface morphology presented with less damage depth at high current density regions. It is due to the effect of water cavitation peening under the cavitation condition. In the cavitation experiment, with amplitude of $30{\mu}m$ and seawater temperature of $25^{\circ}C$, weight loss and cavitation-erosion damage depth were dramatically increased after 5 hours inducing cavitation.

• International Journal of Oral Biology
• /
• v.32 no.4
• /
• pp.143-151
• /
• 2007

This study was conducted to investigate the preventing effects of OPB (Rehmannia glutinosa Libosch and Eleutherococcus senticosus Max extracts) and combined OPB/Calcium therapy on bone loss in ovariectomized rats. Sixty Sprague Dawley rats of 12-week-old were divided into eight groups: OVX (ovariectomized), OPBL (OPB 50 mg/kg), OPBM (OPB100 mg/kg), OPBH (OPB 200 mg/kg), OPBL/CAL(OPBL+CAL), OPBM/CAL (OPBM+CAL), OPBH/CAL (OPBH+CAL) and CAL (Calcium citrate 88.33 mg/kg+1$\alpha$, 25-dihydroxy-vitamin $D_3$ 33.33 IU/kg). Bone mineral density (BMD), bone mineral content (BMC), bone strength indices and cortical thickness were analyzed by peripheral quantitative computerized tomography (pQCT). pQCT scanning showed that OVX induced a significant decrease in trabecular bone mineral density and bone mineral content in the proximal tibia $(-36.4\pm2.4%,\;-21.8\pm12.7%)$. These decreases were significantly prevented by the administration of OPBM and OPBM/CAL. Cortical BMD and BMC of tibia were slightly enhanced by OPB and OPB/CAL. However there was no significant difference between OVX and OPB, OPB/CAL treated group. Bone strength indices and cortical thickness were not significantly different. Our results suggest that OPB and combined OPB/Calcium therapy are effective in preventing the development of bone loss induced by ovariectomy in rats.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.468-474
• /
• 1995

The disposable glucose bio-sensor using composite of CTA and PCL membrane was developed for measurement of glucose. The most effective membrane was composed of CTA/PCL(80/20, w/w) and glutaraldehyde one-step immobilization method ($10{\mu}m$ thickness) for glucose sensor gave the best result among various methods, considering oxygen permeability and electronic sensitivity. A scanning electron micrograph of the cross-section of a typical asymmetric CTA/PCL composite membrane showed that the membrane fused with a dense layer covered with a GOD-glutaraldehyde. Glucose oxidase immoblilized on the membrane showed the linearity between difference of absolute amperometric values and glucose concentrations within 7mM when the GOD immobilized electrode was used. About 35% of activity was remained after 8 days when the tyrosinase was immobilized on CTA/PCL (80/20) membrane.

• Journal of the Korean Geophysical Society
• /
• v.6 no.4
• /
• pp.277-294
• /
• 2003

Structures show the phenomena of deformation and lowering of function with time-lapse by artificial environments and changes of geotechnical conditions or accumulation of initial deformation elements. This study aims the structural assessment of cultural property, Chum-Sung-Dae, located in Kyeongjucity, Korea. It was built about 1,300 years ago, and has undergone deformation and ground-subsidence with time-lapse. Non-destructive evaluation techniques were applied to the Chum-Sung-Dae, to protect it from survey. Because of this reason, 3D precise laser scanning surveying system was applied to measure the exact size of Chum-Sung-Dae, displacement and declining angles. Geophysical exploration also was applied to study the subsurface distribution of geotechnical parameters or physical properties. Natural frequencies were measured from real and model of Chum-Sung-Dae to study the dynamic characteristics of vibration and/or earthquake load and stiffness of structures.

• Membrane and Water Treatment
• /
• v.2 no.4
• /
• pp.251-266
• /
• 2011

This work deals with the use of High Resolution Scanning Electron Microscopy (HRSEM) to verify ultrafiltration membrane selectivity at the end of the production line as well as membrane ageing. The first part of this work is focused on new membranes. It is shown that it is better to use sputtering metallization than vacuum deposition, as this latter technique entails thermal damage to the skin layer. Moreover, the impact of the metallization layer on the determination of the membrane pore size is studied and it is observed that no impact of the metallization step can be clearly defined for a metallization layer ranging from 3 to 12 nm. For example, an average pore size of 16.9 nm and a recovery rate of 6.5 % are observed for a 150 kDa cellulose acetate membrane. These results are in agreement with those given by the manufacturer: pore size ranging from 10 to 15 nm and recovery rate ranging from 5 to 10 %. The second part of this work focuses on the study of membrane ageing. A PVDF hollow fibre membrane is studied. It is shown that a 65 % decrease in the permeate flux can be linked to a decrease in the number of pores at the surface of the membrane and a decrease in the recovery rate. In conclusion, a mapping of the pores is performed for several new hollow fibre membranes used to produce drinking water, made of different materials, with different geometries and molecular weight cut-off. These results provide reference data that will help better understand the phenomena of membrane fouling and membrane ageing.

• Journal of Technologic Dentistry
• /
• v.38 no.4
• /
• pp.365-380
• /
• 2016

Purpose: The purpose of this study was to ascertain the need to reform curriculums for digital experts in a way that include the practical and educational aspects of dental labs by determining why educational reforms are needed to comply with changes in dental technology business that are brought by the applications of digital scanning and what changes are being actually brought by the use of CAD/CAM. Methods: This study analyzed the need of education and practice in relation to CAD/CAM by using the independent sample t-test and One-way ANOVA. in accordance with the participants demographic characteristics and job-related variables and factors related to CAD/CAM, and provided only some of the analysis results that were found statistically significant. Concerning the need of education and practice in relation to CAD/CAM, the study also used the independent sample t-test to measure difference in the perception of that need within each of the three groups, or those of job performance, job efficiency and knowledge gain at the signficance level of ${\alpha}=.05$. Results: Dental technologists surveyed here were perceiving that the use of CAD/CAM would bring changes in their job performance, job efficiency and knowledge gain. They were expecting that the biggest changes would be made in work climate and product quality as sub-areas of job performance. However, they said that in terms of job efficiency, the use of CAD/CAM would change job contribution, job satisfaction and job efficiency, but not lead to staffing. These results suggest that more special programs for CAD/CAM education are needed to bring up CAD/CAM experts who are more specialized. Conclusion: Among 13 skills related to CAD/CAM, what is most needed to be educated to dental technologists was "molding the occlusal surface" (M=4.19), followed by "designing the 3-D work" (M=4.17), "final shape modification" (M=4.16), "molding the border" (M=4.15) and "checking the fit of prothesis" (M=4.14) in order.