• Title/Summary/Keyword: 3X scope

Search Result 49, Processing Time 0.029 seconds

Development of Scope with Abbe-König Prism (아베-코닉 프리즘을 이용한 스코프 개발)

  • Lee, Dong-Hee;Park, Seung-Hwan
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.18 no.4
    • /
    • pp.509-517
    • /
    • 2013
  • Purpose: The purpose of this study is developing the 2.6 ${\times}$ optical scope with a Abbe-K$\ddot{o}$nig prism. Methods: First, considering the size of the effective aperture and the focal length of the objective lens, we designed an Abbe-K$\ddot{o}$nig prism. Next, we calculated the optical and geometric distances of Abbe-K$\ddot{o}$nig prism designed in this way. After allocating the focal length of the objective lens and the eyepiece lens so as to satisfy the magnification and optical effective distance of the entire system by using this calculation result, we completed the entire system by optimizing this optical system. Results: We were able to complete the optical scope of about 2.6 ${\times}$ magnification by designing an objective lens with a focal length of 63.13 mm which was composed of two pieces, an eyepiece with a focal length of 24.3 mm which was composed of four pieces, and an Abbe-K$\ddot{o}$nig prism with a face length 11.5 mm. Conclusions: We designed and fabricated an optical scope with 2.6 ${\times}$ magnification employing an Abbe-K$\ddot{o}$nig prism. Then, this system became the compacted optical system with a barrel diameter of 31 mm, characterized by an effective aperture of 12.0 mm and an effective optical barrel length of 103 mm and a resolution of 200 cycles/rad at 50% MTF criterion within the half viewing field angle of $6.42^{\circ}$.

New 3D failure analysis of water-filled karst cave beneath deep tunnel

  • Zhang, R.;Yang, X.L.
    • Geomechanics and Engineering
    • /
    • v.18 no.1
    • /
    • pp.1-9
    • /
    • 2019
  • In this study, both 2D and 3D failure shapes of rock mass above the water-filled cavity are put forward when the surrounding rock mass cannot bear the pressure caused by the water-filled cavity. Based on the analytical expressions derived by kinematic approach, the profiles of active and passive failure patterns are plotted. The sensitivity analysis is conducted to explore the influences of different rock parameters on the failure profiles. During the excavation of the deep tunnels above the karst cavity, the water table always changes because of progressive failure of cavity roof. Therefore, it is meaningful to discuss the effects of varying water level on the failure patterns of horizontal rock layers. The changing laws of the scope of the failure pattern obtained in this work show good consistency with the fact, which could be used to provide a guide in engineering.

XRR용 두께 표준물질 제작을 위한 박막성장 및 특성평가

  • Yu, Byeong-Yun;Bin, Seok-Min;Kim, Chang-Su;O, Byeong-Seong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.141-141
    • /
    • 2012
  • X-선 반사율 측정법(XRR)은 비파괴적인 측정방법과 수 nm의 두께를 정밀하게 측정할 수 있는 장점으로 인하여 반도체 산업현장에서 많은 관심과 연구가 이루어지고 있다. 이러한 XRR은 두께 분석 측정의 정밀도를 향상시키고 부정확한 결과를 방지하기 위하여 측정기기를 검증하고 보정할 수 있는 두께 표준물질을 필요로 하고 있다. 본 연구에서는 XRR용 두께 표준물질을 이온빔 스퍼터링 증착방법을 이용하여 제작하였다. 두께 표준물질 제작에 있어 공기 중 노출에 의해 산화가 되지 않는 산화물 박막과 산화물 기판을 선택하였다. 후보물질은 glass, sapphire, quartz, SiO2기판과 HfO2, Ta2O5, Cr2O3 산화물 타켓을 이용하여 박막을 제작하였다. 제작된 후 보물질은 교정된 XRR을 통하여 박막의 두께, 계면 및 표면 거칠기, 밀도등 박막의 구조특성분석을 하였다. Glass, quartz의 경우 기판 표면 거칠기가 좋지 않아 제작된 샘플의 X-선 반사율 곡선이 급격히 떨어지면서 측정되는 각도의 영역이 작아졌다. Sapphire로 제작한 시편은 측정된 데이터와 simulation의 curve fitting이 양호하지 않았다. 이 중 SiO2기판을 사용하고 HfO2박막을 증착한 샘플이 다른 후보물질보다 XRR curve fitting 결과가 가장 양호하여 두께 표준물질로 응용하기에 적절하였다. 그리고 AFM (Atomic Force MicroScope)을 이용하여 기판의 거칠기 및 증착한 박막표면 거칠기 측정을 하였고, TEM (Transmission Electron Microscope)으로 두께 측정을 하여 XRR로 얻은 데이터와 비교하였다. 이러한 결과를 토대로 XRR용 두께 표준물질 제작할 수 있었고, 추후 불확도 평가 및 비교실험을 통하여 제작된 XRR용 두께 표준물질을 이용할 수 있을 것으로 기대된다.

  • PDF

A Study on the NDT System U sing Piezoelectric Transducers (압전트랜스듀서를 이용한 비파괴검사장치에 관한 연구)

  • Hwang, Hyun-Suk;Song, Joon-Tae
    • Proceedings of the KIEE Conference
    • /
    • 1996.07c
    • /
    • pp.1594-1596
    • /
    • 1996
  • The NDT(nondestructive test) using pulse echo method with piezoelectric transducers and the system for NDT including image processing were studoed. The system consisted of pulse generator and receiver, two step motors for X-Y scanner, PC-Scope for data aquisition and PC-Lab for trigger and motor driving. We tested and estimated at one point under the following conditions : 1) just water, 2) Aluminum without any crack and 3) Aluminum with hole. The estimated NDT result of whole area (point : $35{\times}20$) is compared with real samples.

  • PDF

A Study on Activities of Diagnostic X-ray Examination(I) (X선진단(X線診斷) 부문(部門)에 있어서 업무량(業務量)에 관(關)한 조사연구(調査硏究)(I))

  • Kyong, Kwang-Hyon;Huh, Joon
    • Journal of radiological science and technology
    • /
    • v.1 no.1
    • /
    • pp.37-43
    • /
    • 1978
  • This Study was conducted, during the period of 8-16th, August in 1977 and 27th, January through 2, Feburury in 1978, to measure laking off and on time for patient's clothes at the radiologic department in general hospitals. The study dealt with three general hospitals which were classified into groups by ownerships; two university hospitals, one private hospitals. The scope of the study was limited to measurement's of taking off and on time except taking a radiograph. The results were summarized as follows: [1] In Summer, the average taking off ana on tine for male was 3 minutes and 7 seconds and 3 minutes and 43 seconds for female. The latter was longer than that for the former. [2] In Winter, the mean taking off and on time for male was 3 minutes 42 seconds, 4 minutes 17 seconds for female. [3] In this respect, the average taking off and on time for female was longer than that for male and that for winter was expended that for summer. [4] In Summer, regardless of age group and sex, the average taking off and on time for taking a radiograph was 3 minutes 25 seconds, and 3 minuteds 59 seconds in Winter. [5] Regardless of season, sen, and age, the mean time expended to take off and on for taking a radiograph was 3 minutes 43 seconds.

  • PDF

Effect of Dietary Fatty Acid and Vitamin E Supplementation in Antioxidant Systmes of the Second Generation Rat Brain Sections (식이지방산 조성 및 비타민 E의 보충이 제 2 세대 흰 쥐 뇌조직의 항산화 체계에 미치는 영향)

  • 황혜진;엄영숙;정은정;김수연;이양자
    • Journal of Nutrition and Health
    • /
    • v.34 no.1
    • /
    • pp.14-22
    • /
    • 2001
  • In this study, we examined the effects of dietary fatty acids and vitamin E supplementation on antioxidant systems in the rat brain regions. The Sprague Dawley rats were fed the experimental diets 3-4 wks prior to the conception. Experimental diet consisted of 10% fat(wt/wt) which were safflower oil(SO, poor in $\omega$3 fatty acids), mixed oil(MO, P/M/S ratio=1.03:1.45:1,$\omega$6/$\omega$3 ratio=6.3) and mixed oil supplemented with vitamin E(ME:MO+500mg vitamin E/kg diet). At 3 and 9 weeks of age of the newborn rats, frontal cortex(FC), corpus striatum(CS), hippocampus(H) cerebellum(CB) were dissected out from the whole brain. Activities of glutathione peroxidase(GSH-P(sub)x, superoxide dismutase(SOD) concentrations of malondialdehyde(MDA) were mesaured. Dietary fatty acids were not effective in antioxidative system for rat brain. However, when vitamin E was supplemented to the diet(ME), the activities of GSH-P(suh)x tended to increase in comparison to MO group. Therefore, the activites of GSH-P(suh)x of FC and H at the age of 3 weeks showed significant differences(p<0.05). The activities of Total-SOD tended to decrease in ME group compared to MO group. There were significant differences(p<0.05) in FC and CS at the age of 3 weeks. The activities of Mn-SOD tended to increase and Cu, Zn-SOD tended to decrease when vitamin E was supplemented. The activity levels of antioxidative enzymes at the age of 3 weeks and 9 weeks were similar. This suggested that the activity level of antioxidative enzymes reached to the adult level at the age of 3 weeks which is the end point of lactation period. The concentrations of MDA were not altered by experimental diets. When the activities of antioxidant enzymes were compared, the activities of antioxidant enzymes were the lowest in H and FC. In conclusion, the antioxidative system were not altered by dietary fatty acid at the age of 3 weeks and 9 weeks, but the supplementation of vitamin E altered the antioxidative systems. Therefore, these findings should be considered comprehensively in scope of the balance of various antioxidative systems and their interactions(Korean J Nutrition 34(1):14-22, 2001)

  • PDF

Propose a Static Web Standard Check Model

  • Hee-Yeon Won;Jae-Woong Kim;Young-Suk Chung
    • Journal of the Korea Society of Computer and Information
    • /
    • v.29 no.4
    • /
    • pp.83-89
    • /
    • 2024
  • After the end of the service of Internet Explorer, the use of ActiveX ended, and the Non-ActiveX policy spread. HTML5 is used as a standard protocol for web pages established based on the Non-ActiveX policy. HTML5, developed in the W3C(World Wide Web Consortium), provides a better web application experience through API, with various elements and properties added to the browser without plug-in. However, new security vulnerabilities have been discovered from newly added technologies, and these vulnerabilities have widened the scope of attacks. There is a lack of research to find possible security vulnerabilities in HTML5-applied websites. This paper proposes a model for detecting tags and attributes with web vulnerabilities by detecting and analyzing security vulnerabilities in web pages of public institutions where plug-ins have been removed within the last five years. If the proposed model is applied to the web page, it can analyze the compliance and vulnerabilities of the web page to date even after the plug-in is removed, providing reliable web services. And it is expected to help prevent financial and physical problems caused by hacking damage.

Construction of Management System of Road Position Information Using GPS Surveying Data

  • Kim, Jin-Soo;Roh, Tae-Ho;Lee, Jong-Chool
    • Korean Journal of Geomatics
    • /
    • v.3 no.1
    • /
    • pp.15-22
    • /
    • 2003
  • This study aims to construct a management system of road position information as part of the build-up to a maintenance and management system of highways. First, information on the positions of the roads were obtained by a real-time kinematic satellite surveying, and then the degree of accuracy was analyzed in comparison with the data of the existing design drawings. The linear coordinates of road center line obtained by using RTK GPS showed about 7.6-13.2cm errors in X and Y directions in the case of the national road No.2 section, and about 8.4-9.2cm errors in the case of local road No.1045 section. These errors were within the tolerance scope regulated by the TS survey, and could be practically used. In the case of vertical alignment, there were about 6.2cm errors in the Z direction in local road No.1045 section. Aerial photographs are normally used in producing numerical maps, and it can be practically used because the tolerance scope of the elevation control point is l0cm when the scale of aerial photographs is 1/1000. The management system of road position information, utilizing Object-Oriented Programming(OOP), was built having the data acquired in this way as the attribute data. The system developed in this way can enable us to spot the positions of road facilities, the target of management with ease, to easily update the data in case of changes in the positions of roads and road facilities, and to manage the positions of roads and road facilities more effectively.

  • PDF

A Study on the Development of the Basic Brassiere Pattern and a Grading Method for the 1924 Generation (1924세대용 브래지어 원형개발 및 그레이딩에 관한 연구)

  • Oh, Song-Yun;Choi, Sei-Sun
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.31 no.4 s.163
    • /
    • pp.633-645
    • /
    • 2007
  • The purpose of this study is to develop brassiere patterns which are both fitting and functional for women aged 19 to 24(the 1924 generation). We suggested a 'size chart for body measurements' for constructing basic brassiere patterns with six sizes of '70, 75', 'AA, A, B cups', which are used most frequently by the 1924 generation consumers. The scope of research was in reference to the statistical analysis results of the Size Korea(2004) body measurements and the results of the data from the preceding research. The 'drafting method for constructing basic brassiere patterns for the 1924 generation consumers' was completed by selecting a total of 18 subjects, 3 for each six sizes in the scope of research, and three wearing tests were carried out with the subjects. We compiled one brassiere pattern in six sizes obtained with the drafting method of constructing a basic brassiere pattern on another by block pattern in order to observe the phase of change in dimensions and shapes of paper pattern. The result was converted into the variations of a x-axis and a y-axis, and we suggested 'Size Grading Rule' and 'Cup Grading Rule' for the basic brassiere patterns. As the results of the wearing evaluation of the basic brassieres and measuring the variation in body dimensions by wearing brassieres, the dimensions and shapes of the basic brassieres suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

RETRACTED: Design of LEO Constellations with Inter-Satellite Connects Based on the Performance Evaluation of the Three Constellations SpaceX, OneWeb and Telesat

  • Peng Zong;Saeid Kohani
    • Korean Journal of Remote Sensing
    • /
    • v.40 no.3
    • /
    • pp.317-317
    • /
    • 2024
  • Notice: This article has been retracted as a result of the review (on May 14, 2024) by the Research Ethics Committee of the Korean Society of Remote Sensing, which confirmed research misconduct (plagiarism). The Korean Journal of Remote Sensing (KJRS) Editorial Office received a report alleging plagiarism in a paper published in KJRS authored by Zong and Kohani (2021). Following a thorough investigation by our Research Ethics Committee, we found significant similarities between the original paper (Lee and Mortari, 2017) and the paper (Zong and Kohani, 2021) published in KJRS. The scope of the plagiarism included a number of identical figures, tables, and equations, as well as textual content. As a result, the Research Ethics Committee of the Korean Society of Remote Sensing has decided to retract the paper (Zong and Kohani. 2021) for deliberately using the ideas, research content, and results of others without proper approval or citation. To preserve academic integrity, we take responsibility for enforcing ethical policies and proceeding with the follow-up actions: 1. Disclosure and preservation of the facts and reasons for the retraction of the plagiarized paper, 2. Prohibition of submissions for the next three years for the authors of the plagiarized paper, 3. Notification to the authors’ affiliated institution of the retraction of the plagiarized paper. We deeply regret to report for retraction of the article and apologize to the readers of KJRS and to the authors of the original work for any inconvenience caused.