• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.545-548
• /
• 2002

$(Ba_{0.6-x}Sr_{0.4}Ca_x)TiO_3$(BSCT) (x=0.10, 0.15, 0.20) powders were prepared by the sol-gel method and BSCT thick films were fabricated by the screen-printing method. The structural properties as a faction of the composition ratio were studied. As a result of the differential thermal analysis (DTA), exothermic perk was observed at around $860^{\circ}C$ dne to the formation of the polycrystalline perovskite phase. The BSCT thick films sintered at $1350^{\circ}C$ for 2h showed the average grain size of $2{\sim}7{\mu}m$. The average thickness of BSCT thick films, obtained by 3 times of screen-printing, was approximately $85{\mu}m$.

• Journal of information and communication convergence engineering
• /
• v.13 no.3
• /
• pp.189-196
• /
• 2015

In this paper, we present a rotating auto-zeroing offset cancellation technique, which can improve the performance of touch screen sensing circuits. Our target touch screen detection method employs multiple continuous sine waves to achieve a high speed for large touch screens. While conventional auto-zeroing schemes cannot handle such continuous signals properly, the proposed scheme does not suffer from switching noise and provides effective offset cancellation for continuous signals. Experimental results show that the proposed technique improves the signal-to-noise ratio by 14 dB compared to a conventional offset cancellation scheme. For the realistic simulation results, we used Cadence SPECTRE with an accurate TSP model and noise source. We also applied an asymmetric device size (10% MOS size mismatch) to the OP Amp design in order to measure the effectiveness of offset cancellation. We implemented the proposed circuit as part of a touch screen controller system-on-chip by using a Magnachip/SK Hynix 0.18-µm complementary metal-oxide semiconductor (CMOS) process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.419-425
• /
• 2000

Multiple layer of wire screen is widely used in many compact devices to filter particulates and to heat or cool fluids. However, data of flow resistance and heat transfer through such layers are rare to find and thus they are experimentally investigated in this study. Compressed air is made to flow through it to find the Ergun constants over a wide range of the Reynolds number. Also, unsteady heating of the wire screen is performed to find the equivalent heat transfer coefficient between the screen and the air by fitting the unsteady air temperature. The obtained coefficients are expressed in terms of the Reynolds number and the Prandtl number.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.375-379
• /
• 2016

A current subtraction technique with parallel operation system is proposed to remove excessive current in touch screen application. The proposed current subtraction remove the current which go into the input node of charge amplifier. The value of subtraction current is same with current when touch screen is not touched. As a result, charge amplifier output is only proportional to variation of mutual capacitor, which make dynamic rage is increased. Also, Transmitter (Tx) driving signal and subtraction driving signal are out of phase each other. Thus, noise generated in Tx is cancelled. The proposed IC is implemented in a mixed-mode 0.18-um CMOS process. Overall system is designed for touch screen panel (TSP) with 16 driving lines and 8 sensing lines. 5-V supply voltages are used in the proposed circuits. For multiple Tx driving signal, Walsh codes are used and signal frequency is 300 khz. By using proposed technique, dynamic rage is improved 36 dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1990.10a
• /
• pp.26-30
• /
• 1990

Bi$\_$0.7/Pb$\_$0.3/Sr$_1$Ca$_1$Cu$\_$1.8/Ox thick films were screen printed on magnesia(MgO), silver and yttrium stabilized zirconia (YSZ) substrates and were sintered in a boat with cover to prevent the evaporation. The high-Tc phase increase and the low-Tc phase and Ca$_2$PbO$_4$ decrease with an increase in sintering temperature from 835$^{\circ}C$ to 860$^{\circ}C$. YSZ substrate interact strongly with the oxide resulting in poor superconductor, while the Ag and MgO substrates were satisfactory to make screen printed superconductors. The Bi$\_$0.7/Pb$\_$0.3/Sr$_1$Ca$_1$Cu$\_$1.8/Ox thick films screen printed both on Ag and MgO substrates show high Tc phase of ~85% and Tc of 96K.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.157-167
• /
• 2023

As a new trend in the development of urban public spaces, the use of right-angle LED screens perfectly combines building facades with naked-eye 3D visual effects, providing designers with a brand-new creative platform. How to create a realistic naked-eye 3D effect on a right-angle LED screen and bring an immersive visual experience to the audience has become a question worth exploring. So far, production companies have yet to announce the relevant design ideas and complete production methods. In order to explore the production principle and production process of the naked-eye 3D effect of the right-angle LED screen, we summarize the basic production principle of the naked-eye 3D impact of the right-angle LED screen through case analysis. Based on understanding the production principle, the actual case production test was carried out, and a complete production process of the naked eye 3D visual effect of the right-angle led screen was tried to be provided by off-line rendering. For the problem of how to deal with image deformation, we provide two production methods: post-production software correction and UV mapping. Among them, the UV mapping method is more efficient and convenient. Referring to this paper can help designers quickly understand the production principle of the naked eye 3D effect of right-angle LED screens. The production process proposed in this paper can provide a reference for production method for related project producers.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.3
• /
• pp.169-176
• /
• 2012

The information delivery and transmission media(DID or PID) market is making remarkable growth as the high-speed networks are spreading and LCD/LED TVs are more and more popularized, and display devices are increasingly large and high-definition. In addition, the popularization of smart devices and the expansion of the information delivery and transmission media market make a demand for N-Screen in content service. Colleges and universities have installed and operated various types of DID to promote their schools and departments and deliver information about them, still remaining in the level of media content implementation. So, we implement and evaluate a next-generation electronic bulletin board for each department that allows for interactive N-Screen communication based on the integration of smart phone and internet. This board enhanced efficiency as supporting N-Screen, inserting and deleting the contents at real time and offering bidirectional communication.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.3
• /
• pp.11-18
• /
• 2013

In this paper, we propose a new design scheme of N-Screen emulator based on Cloud and then implement the emulator, in order to solve the critical point of N-Screen emulator based on Cloud. This method, without the emulator in the server, will be able to confirm the features of the emulator with a browser using Web Service. This means that the identical service is possible without regard to personal computer or mobile environment. Also, in order to emulating each different web browser engine of the various devices separately, we revise and manage the WebKit engine to be suitable to the characteristics of each device. In the previous design method, the number of emulators which can be shown in a monitor is restricted to 2 or 3. However, we show that the proposed design method can improve the performance of server to the extent that this method could operate more than 100 emulators per each server.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.763-764
• /
• 2008

3D displays requires multiplexing of left and right pictures on the same screen so that they can be viewed independently by the view using various schemes, including LCD shutters, polarizers, narrow band filters, and lenticular lenses on the screen. All these methods reduce the effective screen brightness by as much as 10X. The eye responses to the lower brightness are analyzed and found to compensate partially giving a lower perceived brightness. This paper presents such eye response analysis and a low cost approach to increasing brightness in a RPTV using the long life DPR system, increasing the screen brightness by over 2.5 times, while maintaining acceptable lamp lifetime.

• Journal of the Chungcheong Mathematical Society
• /
• v.22 no.3
• /
• pp.409-416
• /
• 2009

In this paper, we study the geometry of lightlike hypersurfaces of a semi-Riemannian manifold. We prove a classification theorem for lightlike hypersurfaces M with totally umbilical screen distributions of a semi-Riemannian space form.