• 한국지능시스템학회논문지
• /
• 제22권3호
• /
• pp.267-272
• /
• 2012

본 논문에서는 6 방향 자유도를 지닌 능동 자기베어링 시스템의 강인 디지털 퍼지 제어에 대한 내용을 다루고자 한다. 6방향 자유도에 대한 기본 모델은 회전자 구조와 원뿔형의 능동 자기베어링 시스템의 자기력 간의 상관관계에 의해 결정된다. 구성된 모델은 비선형 동적방정식으로 구성되기 때문에, 제어 목적을 달성하기 위한 제어 입력 신호의 설계가 어려우며, 외부 환경의 영향에 따른 시스템 파라미터 변화율에도 많이 민감한 편이다. 이를 보완하기 위하여, 획득한 동적방정식을 기반으로 TS 퍼지 모델에 기반 한 디지털 제어 목적에 적합한 구조로의 변환이 이루어진다. 여기서 말하는 제어 목적이란, 회전자의 회전을 외부의 물리적 접촉 없이 자기장의 힘만으로 동작하도록 베어링의 위치를 최대한 센터에 위치케 하는 것을 말한다. 본 논문에서는 6자유도를 지닌 능동 자기베어링 시스템의 비선형성에 대한 해석 방안으로 퍼지 모델링을 통해 시스템을 재해석하게 되며, 외부 파라미터 변화에 따른 대응을 위하여 강인 제어기 설계를 목적으로 한다. 제안된 강인 제어 알고리즘은 시뮬레이션 과정을 통해 검증된다.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.118-127
• /
• 2005

A spatial 3 degrees-of-freedom mechanism employing Stewart Platform structure is proposed: the mechanism maintains the 3- RRPS structure of Stewart Platform but has an additional passive PRR serial sub-chain at the center area of the mechanism in order to constrain the output motion of the mechanism within the output motion space of the added PRR serial subchain. The forward and reverse position analyses of the mechanism are performed. Then the mechanism having both the forward and the reverse closed-form solutions is suggested and its closed form solutions are derived. It is confirmed, through the kinematic analysis of those two proposed mechanisms via kinematic isotropic index, that both the proposed mechanisms have fairly good kinematic characteristics compared to the existing spatial 3-DOF mechanisms in literature.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.124-133
• /
• 2007

Active vibration isolation systems need the following performance specifications which are different from those of existing positioning systems: usage of seismic sensors, strict suppression of phase lead/lag in signal processing for sensors and actuators, excellent control in low frequency range and so on. In consideration of such specifications, a 3-DOF precision stage for vibration isolation is designed and modeled based on the physical characteristics. Then the major parameters such as spring constants and damping coefficients are valued by the system identification method using empirical transfer function. Finite element analysis is used as a verification and simulation tool throughout this research. This paper lays the foundation for the future research on the control of the active vibration isolation system.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.165-173
• /
• 2000

This Paper presents the position tracking control of a closed-loop cylinder system using electro-rheological(ER) valve actuators. After manufacturing three sets of cylindrical ER valves on the basis of Bingham model of ER fluid, a 3 dof(degree-of-freedom) closed-loop cylinder system having the heave, roll and pitch motions is constructed. The governing equations of motion are derived using Lagrange's equation and a control model is formulated by considering nonlinear characteristics of the system. Sliding mode controllers are then designed fer these ER valve actuators in order to achieve position tracking control. The effectiveness of trajectory tracking control performance of the proposed cylinder system is demonstrated through computer simulation and experimental implementation of the sliding mode controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.772-776
• /
• 1997

For a robot to perfom more versatile tasks, it is invitable for the robot's end-effector to come into contact with its environment. In thos case, to achieve better performance, it is necessary to properly control the contact force between the robot and the environment. In thos work, hybrid control theory is studied and is verified through experiment using a 3 DOF robot. In the experiment, two position/force controllers are used. Fist, proportional-integral-derivative controller is used as the controller for both position and force. Second, computed-torque method is used as the position controller, and proportional-integral-derivative controller is used as the force controller. For a proper modeling used in computed-torque method, the friction torque is measured by experiment, and compensation method is studied. The hybrid control method used in this experiment effectively control the contact force between the end-effector and the environment for various types of jobs.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권2호
• /
• pp.161-165
• /
• 2003

In this paper, we investigate the issues on the design and implementation of tele-operation system based on the haptic interface. Here, the 3-DOF haptic device and the X-Y-Z stage are employed as master controller and slave system respectively. For this master-slave system, the force feedback algorithm, the modeling of virtual environments and the control method of X-Y-Z stage are presented. In this paper, internet network is used for data communication between master and slave. We construct virtual environment of the real convex surface from the force-feedback in controlling the X-Y-Z stage and measuring the force applied by the 3-DOF haptic device.

• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.64-71
• /
• 2009

A 3-D rehabilitation robot system is developed in this paper. The robot system is for the rehabilitation of upper extremities, especially the shoulder and elbow joints, and has 3-D workspace for enabling occupational therapy to recover physical functions in activities of daily living(ADL). The rehabilitation robot system, which is driven by actuators, has 1 DOF in horizontal rotational motion and 2 DOF in vertical rotational motion, where all actuators are set on the ground. Parallelogram linkage mechanisms lower the equivalent inertia of the control elements as well as control forces. Also the mechanisms have high mechanical rigidity for the end effector and the handle. Passive motion mode experiments have been performed to evaluate the proposed robot system. The results of the experiments show and excellent performance in simulating spasticity of patients.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.83-89
• /
• 2005

This paper presents vehicle stability control algorithm based on 3-DOF vehicle model. The brake control inputs have been directly derived from the sliding control law based on a three degree of freedom plane vehicle model with differential braking. The simulation has performed using a full nonlinear 3-dimensional vehicle model and the performance of the controller has been compared to that of a direct yaw moment controller. Simulation results show that the proposed controller can provide a vehicle with better performance than conventional controller with respect to brake actuation without compromising stability at critical driving conditions.

• 로봇학회논문지
• /
• 제12권3호
• /
• pp.306-312
• /
• 2017

Recently, development of robot technology has been actively investigated that industrial robots are used in various other fields. However, the interface of the industrial robot is limited to the planned and manipulated path according to the target point and reaching time of the robot arm. Thus, it is not easy to create or change the various paths of the robot arm in other applications, and it is not easy to control the robot so that the robot arm passes the specific point precisely at the desired time during the course of the path. In order to overcome these limitations, this paper proposes a new-media content management platform that can manipulate 6 DOF industrial robot arm using 3D game engine. In this platform, the user can directly generate the motion of the robot arm in the UI based on the 3D game engine, and can drive the robot in real time with the generated motion. The proposed platform was verified using 3D game engine Unity3D and KUKA KR-120 robot.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 동계 학술대회 논문집
• /
• pp.587-593
• /
• 2000