• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.220-222
• /
• 1999

This paper presents a numerical analysis of the eddy current testing with cracked pipe using finite element method (FEM). ${\vec{A}},\;{\phi}-{\vec{A}}$ method is adopted for the formulation of 3-dimensional(3-D) FEM with the brick element. The cracks investigated here are the inner and outer surface of axial symmetry, 90 degree circular one. The algorithm of 3-D numerical analysis is employed for the axisymmetric pipe with the cracks. In order to verify the validity of 3-D numerical analysis, the results are compared with those of 2-D analysis with the same type of the model. The differential impedance is obtained by using energy method and its locus are various 8-shaped curves for each cracks. The ICCG method is used for the calculation of a matrix.

• 한국BIM학회 논문집
• /
• 제9권3호
• /
• pp.30-40
• /
• 2019

Extraction of fabrication documents is very important because it provides information related to tasks of fabrication and construction. Therefore, in the case of a prefabricated member such as a steel structure, it is necessary to improve the productivity of fabrication documents through 3D BIM. However, research and evidence data on direct comparison analysis of 3D BIM-based documents extraction versus 2D CAD-based documents extraction are hard to find. Thus, this study focuses on productivity analysis of 3D BIM based fabrication documents extraction. In this study, the productivity data of fabrication documents extraction for module construction of EPC project was analyzed. For the productivity analysis, a case study on the fabrication documents of Module A (1,965 sheets) and Module B (1,216 sheets) was conducted. Fabrication documents for each module include general arrangement drawing, assembly drawing, single part drawing and single plate drawing. Comparison of 2D CAD based fabrication documents extraction and 3D BIM based fabrication documents extraction, the productivity for the entire work was improved from 17 hours to 16 hours for Module A and 12 hours to 7 hours for Module B. Especially, the productivity of the assembly drawings, which occupies a large part of the fabrication documents, was improved by about 48.75% from the total time required from 281 hours to 144 hours.

• International journal of advanced smart convergence
• /
• 제10권3호
• /
• pp.149-156
• /
• 2021

Today, 3D softwares have become an essential tool in all areas of Video, including Movies, Animations, CFs, Motion Graphics and Games. One of the most commonly used fields is the 3D character video part. However, these 3D character animations and motion graphics softwares are difficult to learn and too much to learn, making it difficult to learn them all in a university education with a limited time of four years. In this paper, many Inverse kinematics tools, which are essential in the 3D character animations and motion graphics field, compare and analyze the strengths and weaknesses of each tool, focusing on Bone, Character Studio, and Character Animation Toolkit, which are most commonly used in work fields. And use Delphi techniques for 3D experts to secure objectivity. Therefore, for universities that require large amounts of teaching in a limited time, I propose an analysis of which of the above three Inverse Kinetics tools is advantageous for students to select and focus on for efficient education.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.527-534
• /
• 2024

In this study, focuses on noise reduction between floors in the civil and architectural fields. Specifically, it investigates the application of newly developed 3D Textile to slabs to reduce interfloor noise. The effect of 3D Textile, through performance analysis via experiments and noise analysis using finite element method, provides a new understanding of noise reduction technology, and is expected to contribute to the improvement of living quality in residential spaces.

• Wind and Structures
• /
• 제7권1호
• /
• pp.13-28
• /
• 2004

A method of numerical analysis without conducting 3D wind tunnel model tests was examined in our previous study for predicting vortex-induced oscillation of bridge girders with span-wise varying geometry. The aerodynamic damping forces measured for plural wind tunnel 2D models were used in the analysis. A further study was conducted to examine the precision of solution obtained by this method. First, the responses of vortex-induced oscillation of two rocking models and a taut-strip bridge girder model with span-wise varying geometry were measured. Next, the responses of these models were numerically analyzed by means of this method, and then a comparison was made between the obtained $Vr-A-{\delta}_a$ contour diagram of each 3D model in the wind tunnel test and the diagram in the numerical analysis. Since close correlations were observed between each two $Vr-A-{\delta}_a$diagrams obtained in the model test and in the analysis in cases where the 3D model did not have strong three-dimensionality, our findings revealed that the predicted solution proved to be reasonably accurate.

• 식물분류학회지
• /
• 제52권3호
• /
• pp.144-155
• /
• 2022

Daphne kiusiana is an evergreen shrub with dense head-like umbels of white flowers distributed in southern Korea, Japan, China, and Taiwan. Plants in China and Taiwan are recognized as var. atrocaulis by having a dark purple stem, elliptic leaves, and persistent bracts. Recently, plants on Jejudo Island were segregated as a separate species, D. jejudoensis, given their elliptic leaves with an acuminate apex, a long hypanthium and sepals, and a glabrous hypanthium. Morphological variations of three closely related taxa, the D. kiusiana complex, were investigated across the distributional range to clarify the taxonomic delimitation of members of the complex. Twelve characters of the leaf and flower were measured from digitized herbarium specimens using the image analysis program ImageJ and were included in a morphometric analysis, the results of which indicate that the level of variation in the characters is very high. The results of a principal component analysis weakly separated D. jejudoensis from D. kiusiana according to their floral characteristics, such as a longer, glabrous hypanthium, and larger sepals. However, some individuals of D. kiusiana, particularly those from Bigeumdo Island, were included in D. jejudoensis. Recognition of D. kiusiana var. atrocaulis based on the leaf shape was not supported in the analysis, and D. jejudoensis may be recognized as a variety of D. kiusiana. Our morphometric analysis shows that digitized images of herbarium specimens could be useful and an additional method by which to investigate more diverse specimens.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1651-1664
• /
• 2023

It is very difficult to capture the multi-dimensional phenomena such as asymmetric flow and temperature distributions with the one-dimensional (1D) model, obviously, due to its inherent limitation. In order to overcome such a limitation of the 1D representation, many state-of-the-art system codes have equipped a three-dimensional (3D) component for multi-dimensional analysis capability. In this study, a standard multi-dimensional analysis model of APR1400 (Advanced Power Reactor 1400) has been developed using TRACE (TRAC/RELAP Advanced Computational Engine). The entire reactor pressure vessel (RPV) of APR1400 has been modeled using a single 3D component. The fuels in the reactor core have been described with detailed and coarse representations, respectively, to figure out the impact of the fuel description. Using both 3D RPV models, a comparative analysis has been performed postulating a double-ended guillotine break at a cold leg. Based on the results of comparative analysis, it is revealed that both models show no significant difference in general plant behavior and the model with coarse fuel model could be used for faster transient analysis without reactor kinetics coupling. The analysis indicates that the asymmetric temperature and flow distributions are captured during the transient, and such nonuniform distributions contribute to asymmetric quenching behaviors during blowdown and reflood phases. Such asymmetries are directly connected to the figure of merits in the LBLOCA analysis. Therefore, it is recommended to employ a multi-dimensional RPV model with a detailed fuel description for a realistic safety analysis with the consideration of the spatial configuration of the reactor core.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.171-173
• /
• 1997

This paper presents analysis of the radial force density in brushless DC motor of which distribution is not uniform in the axial direction. The analysis considering 3D shape of teeth and overhang is not only important but essential to calculate the radial force density that acts on the teeth of stator, because it is frequent source of vibration and changes at the end of teeth. For the analysis, a new 3D equivalent magnetic circuit network method taking into account movement of the rotor without remesh is proposed. The radial force density is calculated by Maxwell stress tensor and analyzed by discrete Fourier transform.

• 패션비즈니스
• /
• 제23권6호
• /
• pp.101-115
• /
• 2019

3D printing is attracting attention from all industries as it enables the development of personalized product design to meet consumer needs by establishing a mutual connection system between production, management and consumers. However, there are still limitations to applying them as apparel materials, and research on the recognition of 3D printing or the preference for fashion products is needed to actually commercialize 3D printing in the fashion industry. In this study on the development of various product designs using 3D printing technology in the fashion industry, an analysis of 255 questionnaires was conducted to determine the preferences and purchase intention trends of fashion product design using 3D printing for college students. Data analysis was performed with IBM SPSS Statistics (V.24). 'Fashion sensitive pursuit', 'Individuality & brand pursuit' and 'Functional convenience' was interested in fashion accessories using 3D printing technology and customized fashion apparel products using 3D printing. 'Functional Convenience-oriented' and 'Practical Purchasing-oriented' type showed that the functionality and durability of products made using 3D printing technology were important. And 'Individuality pursuit' type indicated that design and applied materials were important when producing products using 3D printing technology.

• 만화애니메이션 연구
• /
• 통권10호
• /
• pp.121-135
• /
• 2006

최근 애니메이션은 극장용은 물론 OVA, TV 시리즈에 이르기까지 2D 제작기법만을 사용한 작품을 보기란 쉽지 않다. 미국의 픽사나 디즈니도 2D 애니메이션 팀을 대폭 줄이고 3D 애니메이션 팀을 위주로 제작하는 것을 봐도 3D애니메이션의 제작이 대세임은 것은 의심할 여지가 없는 듯 하다. 이러한 흐름에 발맞추어 국내의 교육기관이나, 국가 지원정책 역시 3D 위주의 지원정책으로 전환되고 있다. 그러나 과연 이것이 옳은 전환인가 생각 해 볼 필요가 있다. 2D 애니메이션 제작 방식을 유지해야 할 당위성을 일본 2D 애니메이션의 3D의 제작방식 도입, 융합사례 분석을 통해 2D 애니메이션의 필요성과 중요성을 제시하고, 2D 애니메이션에 있어서 3D 컴퓨터 그래픽 제작방식의 효과적인 융합형태를 제시해 보고자 하였다.