• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.55-63
• /
• 2016

Nowadays, large container ships are continually developed and that's why the bow and stern structural stability problems by slamming become a significant more and more. However, due to the complexity of slamming, it is difficult to consider those problems at the design stage. For this reason, we attempt numerical analysis through SNUFOAM by generating the bow and stern two-dimensional cross-sectional grid in WILS JIP experiment at KRISO. Unlike the conventional method for the computation time saving, by setting the inlet flow conditions referred to the model test, we analyzed the slamming without applying the grid deformation method. As a result, when the stern model, as in the previous studies, it was possible to obtain quantitatively the fluid impulse is close to the experimental results. When the bow model, we can found the change by the position of force sensors which are derived for the bulbous bow and obtained fluid impulse and flow shape at slamming similar to the model test.

• Journal of computational fluids engineering
• /
• v.17 no.3
• /
• pp.18-24
• /
• 2012

The aerodynamic performance of the pantograph on a high speed train was compared for different pantograph covers which are designed to block the aero-acoustic noise from the pantograph. For the study, two types of cover are designed: wedge and cone types. The lift force of pantograph with cover was compared with the force of pantograph only. The comparison clarified that the cone type cover increases the sideslip angle of the flow and decreases the lift force considerably. However, the wedge type cover changes the flow direction upward and increases the lift force of the pan head. This increment of lift force compensates the decrement of lift force caused by the blocking of the flow into the pantograph lower frame due to cover. Therefore, in case of the wedge type cover, the overall lift force changes slightly compared with the cone type cover.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.130-135
• /
• 2016

The thermal performance of amorphous steel fibers mixed floor heating system was evaluated. Analysis of results, depending on the hot water supply temperature changes, the average temperature of the bottom of the hot water supply temperature is an amorphous steel fiber floor heating system is about 2~4% higher. The average temperature of the floor surface to 1.5m air amorphous steel fiber system is 1~2% higher. The amount of heat supplied to indoor air (1.5m) from the bottom surface of amorphous steel fiber floor heating system is about 7~8% higher

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.46-46
• /
• 2018

메모리 소자의 수요가 데스크톱 컴퓨터의 정체와 모바일 기기의 폭발적인 증가로 NAND flash 메모리의 고집적화로 이어져서 3차원 집적 기술의 고도화가 중요한 요소가 되고 있다. 1 mm 정도의 얇은 웨이퍼 상에 만들어지는 메모리 소자는 실제 두께는 몇 마이크로미터 되지 않는다. 수직방향으로 여러 장의 웨이퍼를 연결하면 폭 방향으로 이미 거의 한계에 도달해있는 크기 축소(shrinking) 기술에 의지 하지 않고서도 메모리 소자의 용량을 증대 시킬 수 있다. CPU, AP등의 논리 연산 소자의 경우에는 발열 문제로 3D stacking 기술의 구현이 쉽지 않지만 메모리 소자의 경우에는 저 전력화를 통해서 실용화가 시작되었다. 스마트폰, 휴대용 보조 저장 매체(USB memory, SSD)등에 수 십 GB의 용량이 보편적인 현재, FEOL, BEOL 기술을 모두 가지고 있는 국내의 반도체 소자 업체들은 자연스럽게 TSV 기술과 이에 필요한 장비의 개발에 관심을 가지게 되었다. 특히 이 중 TSV용 스퍼터링 장치는 transistor의 main contact 공정에 전 세계 시장의 90% 이상을 점유하고 있는 글로벌 업체의 경우에도 완전히 만족스러운 장비를 공급하지는 못하고 있는 상태여서 연구 개발의 적절한 시기이다. 기본 개념은 일반적인 마그네트론 스퍼터링이 중성 입자를 타겟 표면에서 발생시키는데 이를 다시 추가적인 전력 공급으로 전자 - 중성 충돌로 인한 이온화 과정을 추가하고 여기서 발생된 타겟 이온들을 웨이퍼의 표면에 최대한 수직 방향으로 입사시키려는 노력이 핵심이다. 본 발표에서는 고전력 이온화 스퍼터링 시스템의 자기장 해석, 냉각 효율 해석, 멀티 모듈 회전 자석 음극에 대한 동역학적 분석 결과를 발표한다. 그림1에는 이중 회전 모듈에 대한 다물체 동역학 해석을 Adams s/w package로 해석하기 위하여 작성한 모델이고 그림2는 180도 회전한 서브 모듈의 위상이 음극 냉각에 미치는 효과를 CFD-ACE+로 유동 해석한 결과를 나타내고 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.4
• /
• pp.289-296
• /
• 2011

In this study, fairing configurations for an aircraft are designed and the aerodynamic analyses of the fairings are performed to find the best choice for the aircraft. Fairings considered are wing-tip fairing and wing-body fairing. Wing alone analyses are done for the wing-tip faring selection, while wing-body-tail analyses are done for the wing-body fairing selection. A 3-D RANS solver with Menter's ${\kappa}-{\omega}$ SST turbulence model are used for the aerodynamic analyses. The effects on the drag of the aircraft are examined by comparing the analysis results with and without the farings.

• Advances in aircraft and spacecraft science
• /
• v.2 no.3
• /
• pp.329-343
• /
• 2015

This study aimed to observe the effect of a novel concept (referred to as the flap extension) implemented on the leading edge of the flap of a three element high lift device. The high lift device, consisting of a flap, main element and slat is designed around an Airbus research profile for sufficient take off and landing performance of a large commercial aircraft. The concept is realised on the profile and numerically optimised to achieve an optimum geometry. Two different optimisation approaches based on Genetic Algorithm optimisations are used: a zero order approach which makes simplifying assumptions to achieve an optimised solution: as well as a direct approach which employs an optimisation in ANSYS DesignXplorer using RANS calculations. Both methods converge to different optimised solutions due to simplifying assumptions. The solution to the zero order optimisation showed a decreased stall angle and decreased maximum lift coefficient against angle of attack due to early stall onset at the flap. The DesignXplorer optimised solution matched that of the baseline solution very closely. The concept was seen to increase lift locally at the flap for both optimisation methods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.296-296
• /
• 2015

The aim of this paper is to numerically explore the feasibility of designing a Mini-Hydro turbine. The interest for this kind of horizontal axis turbine relies on its versatility. For instance, in the field of renewable energy, this kind of turbine may be considered for different applications, such as: tidal power, run-of-the-river hydroelectricity, wave energy conversion. It is fundamental to improve the turbine performance and to decrease the equipment costs for achievement of "environmental friendly" solutions and maximization of the "cost-advantage". In the present work, the commercial CFD code ANSYS is used to perform 3D simulations, solving the incompressible Unsteady Reynolds-Averaged Navier-Stokes (U-RANS) equations discretized by means of a finite volume approach. The implicit segregated version of the solver is employed. The pressure-velocity coupling is achieved by means of the SIMPLE algorithm. The convective terms are discretized using a second order accurate upwind scheme, and pressure and viscous terms are discretized by a second-order-accurate centered scheme. A second order implicit time formulation is also used. Turbulence closure is provided by the realizable k - turbulence model. In this study, a mini hydro turbine (3kW) has been considered for utilization of horizontal axis impeller. The turbine performance and flow behavior have been evaluated by means of numerical simulations. Moreover, the performance of the impeller varied in the pressure distribution, torque, rotational speed and power generated by the different number of blades and angles. The model has been validated, comparing numerical results with available experimental data.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.88-93
• /
• 2019

This study concerns the distributions of flow in an air conditioning duct used for a marine and oil drilling ship. From the results of carrying out flow analysis and structural analysis of a ventilation duct applied to a marine structure, the following conclusion could be gained. The pressure tended to increase as the flow velocity at the inlet increased and the pressure at the inlet increased. It was recognized that the pressure decreased due to the influence of a corrugated tube when it entered and exited from the duct. As a result of structural analysis, a higher train was generated at the corrugated tube compared with the duct. In addition, in the case of the internal pressure of 0.7MPa, which was the designed load, it was found that there was almost no influence as it was within 0.1mm.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.93-102
• /
• 2020

This study investigated the dif usion characteristics of Ecklonia cava spores around marine forest reefs. For this purpose, a numerical analysis was conducted using field observations in the target area and an EFDC model. Based on the results of field observations and the EFDC model, Flow-3D was performed on three types of marine forest reefs, mamely triangular pyramid reef, double-dome reef, and ribbed reef, to monitor the movement direction and maximum movement distance for E. cava spores. As a result, the equilaterally triangular pyramid reef and double-domed reef were found to have a maximum settlement of spores of 10 m in the northwestern direction and 6 m in the western direction. The ribbed reef had a maximum settlement of spores at 4m. These results show that consideration of the diffusion characteristics of E. cava spores when the seaweeds are installed can increase the effectiveness of the algae as substrate of adhesion.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.593-593
• /
• 2012

본 연구는 화력 및 원자력 발전소로 취입된 냉각수(circulating and essential service water)가 복수기로부터 온배수 형태의 개수로 흐름으로 표층배수 될 경우 수온을 저감시키기 위해 주입하는 희석수(by-pass cooling water)와의 혼합효과의 효율성을 증대시키고, 불리한 수리현상을 야기하지 않으며, 경제적인 배수로 구조물을 고찰하기 위한 목적으로 시도되었다. 배수로 구조물 내 온배수와 희석수가 혼합되는 구간을 혼합지(mixing basin)라 하는데, 본 과업에서는 ${\bigcirc}{\bigcirc}$발전소의 배수로 구간 중 혼합지를 대상으로 FLOW-3D$^{(R)}$를 이용한 3차원 수치모형을 구축하고, 총 9개에 해당하는 각 대안별 현상을 분석하고 비교하였다. 각 대안들의 차이점은 배수로에 설치되는 보조구조물들의 형상과 배열 등이며, 복수기로부터 나오는 배출수의 수온은 $42^{\circ}C$, 희석수는 $35^{\circ}C$이고, 본 과업의 주요 관심대상 물리량은 유속과 온도이다. 배수로에 아무런 보조 구조물이 없는 형태인 기본 계획안을 검토한 결과, 평균 $3.31^{\circ}C$의 수온강하가 이루어졌으나, 우안 쪽으로 강한 흐름이 발생하여 수온의 좌우편차가 $4.61^{\circ}C$ 가량 발생하는 것으로 나타났다. 기본 계획안의 검토결과를 보완하기 위한 대안으로 연직 흐름의 소산을 위해 고안된 잠형 소파블록(baffle block) 설치안은 평균 $3.06^{\circ}C$의 수온강하가 이루어지고 $4.44^{\circ}C$의 수온 좌우편차가 발생했다. 지그재그(zigzag) 형태의 흐름을 만들어 혼합효과를 올리기 위한 미로형 수제(labyrinth groin) 설치안은 평균 $5.33^{\circ}C$의 수온강하가 이루어지고, $1.43^{\circ}C$의 수온 좌우편차를 보여줘 검토했던 대안들 중 가장 좋은 결과를 보여주었다. V자 배열 소파블럭(deformed block) 설치안은 연직 및 수평방향의 소산을 기대했으나 평균 $3.00^{\circ}C$의 수온 강하와 $4.41^{\circ}C$의 수온 좌우편차를 나타냈다. 벤츄리(Venturi) 형태의 흐름을 발생시키기 위한 병목형(bottleneck) 수로안은 평균 $3.18^{\circ}C$의 수온강하와 $3.94^{\circ}C$의 수온 좌우편차, 흐름의 소산과 흐름방향을 변화시키기 위한 와형 수제(swirl groin) 설치안은 평균 $2.24^{\circ}C$의 수온강하와 $1.48^{\circ}C$의 수온좌우편차, 우안 흐름을 지연시키기 위한 물방석(water cushion) 수로안은 평균 $3.03^{\circ}C$의 수온강하와 $4.50^{\circ}C$의 수온 좌우편차, 우안의 흐름을 좌안으로 보내기 위한 분사형(injector) 수로안은 평균 $3.13^{\circ}C$의 수온강하와 $4.45^{\circ}C$의 수온 좌우편차, 우안의 흐름을 막기 위한 외팔형 수제(cantilever groin) 설치안은 평균 $3.11^{\circ}C$의 수온강하와 $3.02^{\circ}C$의 수온 좌우편차가 발생하는 것으로 나타났다.