• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.328-343
• /
• 2023

Recently, a method of fabricating an esthetic anterior fixed prosthesis by integrating data such as three-dimensional facial scan and jaw motion to form a virtual patient with dynamic occlusion has been introduced. This enables smooth communication with patients during the diagnosis process, improves the predictability of esthetic prosthetic treatment, and lowers the possibility of occlusal adjustment. In this case report, a virtual patient with dynamic occlusion was created in which the results of the treatment were simulated, and esthetic maxillary anterior fixed prosthesis was fabricated. With the aid of the virtual patient, the final restorations were satisfactory both in terms of esthetic and function.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.33-46
• /
• 2015

In this paper, we predicts the analog and digital circuit performance of FinFETs that are scaled down following the ITRS(International technology roadmap for semiconductors). For accurate prediction of the circuit performance of scaled down devices, accurate parasitic resistance and capacitance analytical models are developed and their accuracies are within 2 % compared to 3D TCAD simulation results. The parasitic capacitance models are developed using conformal mapping, and the parasitic resistance models are enhanced to include the fin extension length($L_{ext}$) with respect to the default parasitic resistance model of BSIM-CMG. A new algorithm is developed to fit the DC characteristics of BSIM-CMG to the reference DC data. The proposed capacitance and resistance models are implemented inside BSIM-CMG to replace the default parasitic model, and SPICE simulations are performed to predict circuit performances such as $f_T$, $f_{MAX}$, ring oscillators and common source amplifier. Using the proposed parasitic capacitance and resistance model, the device and circuit performances are quantitatively predicted down to 5 nm FinFET transistors. As the FinFET technology scales, due to the improvement in both DC characteristics and the parasitic elements, the circuit performance will improve.

• Journal of Food Hygiene and Safety
• /
• v.24 no.1
• /
• pp.102-109
• /
• 2009

This study was carried out to analyse the microbio\logical contamination and biogenic amines(BA) content in Korea traditional soybean paste and commercial soybean paste. The results of microbio\logical analysis through Korean traditional soybean pastes($L1{\sim}L4$) were $7.8{\pm}0.1\;\log\;CFU/g{\sim}7.9{\pm}0.1\;\log\;CFU/g$, commercial soybean pastes($H1{\sim}H6$) were $6.2{\pm}0.1\;\log\;CFU/g{\sim}7.4{\pm}0.1\;\log\;CFU/g$ for APC (Aerobic Plate Count), and $L1{\sim}L4$, H5, H6 soybean pastes were $2.3{\pm}0.4\;\log\;CFU/g{\sim}2.6{\pm}0.1\;\log\;CFU/g$ for Bacillus cereus. But other microorganism was not dectected. Among biogenic amines, PUT(putrescine), TYR(tyramine), HIS(histamine), PHE(2-Phenylethylamine) were dectected high level and CAD(cadaverine), TRY(trypramine), AGM(agmatine) were dectected medium level and SPD(spermidine), SPM(spermine), NOR(noradrenaline), SER(serotonin) were dectected low level. Dectected contents of biogenic amines were higher in commercial soybean paste compared to the traditional soybean paste.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.617-623
• /
• 2012

This study was performed to measure the accuracy of different gypsum materials by a white light dental scanner. A master model with the prepared lower full arch tooth was used. The type IV and scannable stone were used for 20 stone casts (10 casts each) duplicated a master model of mandible. The distance between the reference points were measured and analyzed by the Delcam $Copycad^{(R)}$ (Delcam Plc, UK) 3D graphic software. The t-student test for paired samples were used for statistical analysis. The mean differences to master model for type IV stone and scannable stone model were 0.29~0.56 mm, and 0.17~0.35 mm, respectively. There were statistical differences in dimensional accuracy for full arch impression between the master model and type IV/scannable stone (p<0.05). Two different gypsum materials showed clinically acceptable accuracies of full arch digital impression produced by them. Besides, in both gypsum materials, the differences to the master model detected appear to provide enough accuracy for clinical application.

• Journal of the Korean Arthroscopy Society
• /
• v.16 no.2
• /
• pp.160-166
• /
• 2012

Purpose: The aim of this study was to determine the patterns of the stress distribution within the reconstructed anterior cruciate ligament (ACL) double bundles in response to an anterior tibial load and rotatory load at $45^{\circ}$ flexed knee model by use of a 3-dimensional finite element analysis (FEM). Materials and Methods: The $0^{\circ}$ and $45^{\circ}$ flexed 3-D knee model were reconstructed based on the high resolution computed tomography (CT) images from the right knee of a healthy male subject. To simulate double bundle ACL reconstruction, in $0^{\circ}$ analytic model, four 7 mm diameter tunnels were created at the center of each anteromedial (AM) and posterolateral (PL) footprints on the femur and tibia. The grafts were inserted into the corresponding bone tunnels and then reconstructed knee model was flexed to $45^{\circ}$. As a next step, the 5 mm anterior tibial load and internal rotational load of $10^{\circ}$ were applied on the final Computer aided design (CAD) model. And then stress patterns of each bundle were assessed using a finite element analysis. Results: In response to the 5 mm of anterior tibial load, the AM bundle showed increased stresses around the tibial and femoral attachment sites; especially in the anterior aspect of the bundle. In the PL bundle, the highest stress concentration was also noticed on the anterior aspect of the bundle. Under $10^{\circ}$ internal rotational load, the stress concentration was predominant around the anterior aspect of the tibial attachment site within the AM bundle. The PL bundle also showed highest stress concentration on the anterior aspect of the bundle. Conclusion: Although the stress patterns were not identical among the AM and PL bundle, there were common trends in the stress distribution. The stress concentration was predominant on the anterior aspect of both bundles in response to the anterior tibial load and rotatory load.

• Proceedings of the CALSEC Conference
• /
• 1998.10b
• /
• pp.585-594
• /
• 1998

이미 전자상거래(EC)가 시간적ㆍ공간적 제약을 극복하고 국경을 초월한 새로운 교역시장 (Cyber Market)으로 등장하고 있으며 세계 자동차 산업은 표준부품의 공동개발 및 조달을 통해 중복투자 방지, 신차개발기간 단축 등 전략적 제휴를 통한 공조ㆍ공생체계 구축을 경쟁적으로 추진하고 있으나 국내 자동차업계는 제품개발, 부품조달, 판매 및 A/S 등 모든 부문을 독자적으로 해결함으로써 경쟁력 제고에 역행하는 경향이 있다. 또한 자동차 선진국과는 달리 국제 경쟁력 강화를 위한 CALS/EC 정보 기반 기술의 실질적인 활용이 미흡한 실정이다. 이러한 현실을 개선하기 위해 최근에 자동차공업협회(KAMA)와 현대, 대우, 기아 자동차 3사는 자동차 산업 CALS 추진 모델(Autopia)의 구축을 추진하고 있다. 추진 내용은 자동차 산업의 전체 Life-Cycle인 제품기획 단계부터 설계, 생산, 구매/조달, 고객지원 단계등 전 분야를 3개 부문(신차개발 프로세스, 구매조달 프로세스, 고객지원 서비스)으로 구분되어 있다. 신차개발 프로세스 부문은 차세대 PDM을 통하여 제품개발 사이클 단축을 추구하며 STEP을 통한 범용적 설계정보 교환 체계 구현이 기반이 된다. 또한 업무 흐름의 불투명성으로 인한 업무의 불균형 현상 타파와 설계 변경의 효율적 대응을 위하여 Workflow Management가 동시공학에 바탕을 두고 도입 적용되어야 한다. CAD 데이터를 비롯한 방대한 데이터의 효율적 관리를 위해서는 각 프로세스별로 독립된 정보를 체계적으로 관리할 수 있는 통합 환경(Integrated Data Environment)을 구성하여 각 프로세스에 걸쳐 데이터의 처리효율을 증대하여야 한다. 신차개발 부문의 핵심 기술이면서도 현업 적용이 초기 단계인 Digital Mockup과 Virtual Reality의 적용을 위해서는 3D 모델링이 기본 설계 방법으로 적용되어야 하며 이를 통한 어셈블리 및 부품구조의 관리가 이루어져야 한다. 구매조달 프로세스 부문은 자동차 업계의 공통 EDI/EC 네트워크 구축을 통한 경제적인 인프라 구조와 함께 부품 조달 체계의 간소화를 추구함으로써 자동차 산업의 대외 경쟁력 강화가 이루어 질 수 있다. 공개구매 시스템의 구축을 통하여 완성차별로 전속 계열화된 수직적인 부품조달 체계와 업체간 정보공유의 폐쇄성을 제거할 수 있고 완전 경쟁에 의한 우량 협력업체 발굴 기회의 확대가 용이하다. 이를 통하여 궁극적으로는 Global Vendor망의 구축이 실현될 것이다. 종합물류 시스템이 구현되면 판매는 경쟁체제, 물류는 공동화가 됨으로써 국가적으로 물류 비용의 절감이 엄청날 것으로 예상된다. 전국에 산재되어 있는 1,000여개의 대리점과 7,000여개의 정비업소를 대상으로 한 정비부품 EDI/EC 시스템이 구축되면 고객 서비스의 효율 향상과 함께 정비업소의 물류 및 재고 비용의 감소, 조달 속도의 향상, 조달 업무의 간소화 등의 효과를 보게 될 것이다. 고객지원 서비스는 정비정보 시스템, 산업정보 시스템, 쇼핑몰 시스템, 등록대행 시스템등을 통하여 일반 국민들이 피부로 느낄 수 있는 시스템으로 구축 되어야 할 것이다.

• Nuclear Engineering and Technology
• /
• v.46 no.3
• /
• pp.439-446
• /
• 2014

An amphibious inspection robot system (hereafter AIROS) is being developed to visually inspect the in-containment refueling storage water tank (hereafter IRWST) strainer in APR1400 instead of a human diver. Four IRWST strainers are located in the IRWST, which is filled with boric acid water. Each strainer has 108 sub-assembly strainer fin modules that should be inspected with the VT-3 method according to Reg. guide 1.82 and the operation manual. AIROS has 6 thrusters for submarine voyage and 4 legs for walking on the top of the strainer. An inverse kinematic algorithm was implemented in the robot controller for exact walking on the top of the IRWST strainer. The IRWST strainer has several top cross braces that are extruded on the top of the strainer, which can be obstacles of walking on the strainer, to maintain the frame of the strainer. Therefore, a robot leg should arrive at the position beside the top cross brace. For this reason, we used an image processing technique to find the top cross brace in the sole camera image. The sole camera image is processed to find the existence of the top cross brace using the cross edge detection algorithm in real time. A 5-DOF robot arm that has multiple camera modules for simultaneous inspection of both sides can penetrate narrow gaps. For intuitive presentation of inspection results and for management of inspection data, inspection images are stored in the control PC with camera angles and positions to synthesize and merge the images. The synthesized images are then mapped in a 3D CAD model of the IRWST strainer with the location information. An IRWST strainer mock-up was fabricated to teach the robot arm scanning and gaiting. It is important to arrive at the designated position for inserting the robot arm into all of the gaps. Exact position control without anchor under the water is not easy. Therefore, we designed the multi leg robot for the role of anchoring and positioning. Quadruped robot design of installing sole cameras was a new approach for the exact and stable position control on the IRWST strainer, unlike a traditional robot for underwater facility inspection. The developed robot will be practically used to enhance the efficiency and reliability of the inspection of nuclear power plant components.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.466-477
• /
• 2005

Statement of problem : Problem of matching the appearance of porcelain restorations with the patient's natural dentition has always been a concern to dental clinicians. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. Among the various factors, shade and translucency or the core can significantly affect the overall esthetics of the restoration and should be considered when selecting an all-ceramic system. Purpose : The purpose of this study was to spectrophotometrically evaluate the influence of different zirconia systems and core thickness on the final shade of all-ceramic restorations using the CIEL$^*a^*b^*$ system. Material and Methods: Core specimens (n : 20 per group) of In-Ceram Alumina, In-Ceram Zirconia, Digident CAD/CAM Zirconia, Cercon Zirconia were fabricated 20mm in diameter. 10 specimens of each group were fabricated at core thickness of 0.5mm and 0.7mm. These core specimens were veneered with shade Al & A3 porcelain of the recommended manufacturer. CIEL$^*a^*b^*$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan). Color differences were calculated using the equation ${\Delta}E^*=[({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2]^{\frac{1}{2}}$. Results : 1. Specimens of core thickness 0.5mm and 0.7mm did not exhibit clinically perceived color difference. 2. Regarding shade reproducibility, In-Ceram Alumina and In-Ceram Zirconia showed significant difference within each group. 3. Cercon Zirconia group showed the highest $L^*$ value and Digident Zirconia group showed lowest $a^*$ & $b^*$ value. 4. Generally the shade difference between materials was higher in the A3 shade group than in the Al shade group. Conclusion: Within the limitations of this study, there was no color difference after increase in core thickness and every all-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.3
• /
• pp.191-197
• /
• 2019

As the shipbuilding and offshore plant industries grow larger and more complex, their maintenance and inspection systems become more important. Recently, maintenance and inspection systems based on augmented reality have been attracting much attention for improving worker's understanding of work and efficiency, but it is often difficult to work with because accurate matching between the augmented model and reality information is not. To solve this problem, marker based AR technology is used to attach a specific image to the model. However, the markers get damaged due to the characteristic of the shipbuilding and offshore plant industry, and the camera needs to be able to detect the entire marker clearly, and thus requires sufficient space to exist between the operator. In order to overcome the limitations of the existing AR system, in this study, a markerless AR was adopted to accurately recognize the actual model of the pipe system that occupies the most processes in the shipbuilding and offshore plant industries. The matching methodology. Through this system, it is expected that the twist phenomenon of the augmented model according to the attitude of the real worker and the limited environment can be improved.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.1
• /
• pp.40-50
• /
• 2016

A BIM, which is being applied actively to the construction and civil construction industries, is a technology that can maximize efficiency of various sectors from initial planning and design, construction, and maintenance, to demolition; however, it is in the introductory phase in the field of domestic landscaping. In order to introduce and promote BIM in the field of landscape design, this study developed a prototype of a library and template and analyzed the performance of trial application. For the development of a prototype, annotations and types were analyzed from floor plans of existing small parks, and components of landscape template were deduced. Based on this, play facilities, pergola, and benches were madeintofamily and templates, making automatic design possible. In addition, annotations and tags that are often used in landscape design were made, and a 3D view was materialized through visibility/graphic reassignment. As for tables and quantities, boundary stone table, mounding table, summary sheet of quantities, table of contents, and summary sheet of packaging quantities were grouped and connected with floor plans; regarding landscaping trees, classification criteria and name of trees that are suitable for domestic situations were applied. A landscape template was created to enable the library file format(rfa) that can be mounted on a building with BIM programs. As for problems that arose after the trial application of the prepared template, some CAD files could not be imported; also, while writing tables, the basis of calculation could not be made automatically. Regarding this, it is thought that functions of a BIM program and template need improvement.