• The Research Journal of the Costume Culture
• /
• v.30 no.6
• /
• pp.828-841
• /
• 2022

This study aims to develop a fitted torso pattern suitable for males in their forties and fifties who are obese-a group that accounts for more than fifty percent of men in this age group-using a 3D virtual fitting program. Size Korea's 2022 data for obese males in their forties and fifties is utilized for this study. In terms of the research method, a 3D program (CLO 3D) is used to implement the target group's various body types and to apply fitted torsos that enable verification and evaluation of the pattern's fit and ease. The characteristics of fitted torso patterns for obese bodies are as follows: the front centerline is a profile line; shoulder darts are added by reflecting waist-abdominal protrusion in the front panel; and shoulder, arm, waist, and center-back darts are constructed for the back panel. For obese bodies, the minimum circumference ease amounts should be approximately 6-7cm for the chest, 6cm for the waist, and 6-7cm for the hips. Based on an evaluation of the virtual fit of the developed fitted torso pattern, the data shows that a pattern (foundation) such as this is well suited for obese body types with an average of 4.67/5 points for reverse triangular obesity, an average of 6.67/7 points for log obesity, and an average of 6.69 points for the ease amount.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.437-444
• /
• 2009

According to the activation of the fashion electronic commerce, this research investigated the merits and demerits and improvement plan of the 3D virtual try-on technology using the qualitative research method. This research was performed by interview with 70 evaluation group. The evaluation group of 3D virtual try-on was organized and the fit evaluation process by 3D human body scan and the 3D virtual try-on of the i-Fashion technology center were experienced. This study was performed by interview after the actual and virtual try-on about the casual shirt. The convenience and accuracy of measurement, usability in online shopping, body evaluation, complement of sizing system, and body shape management were discovered as merits. The requirement of high accuracy in sizing and avatar, limits of fabric expression, practical limitation by cost, vexatious of measurement garment, differences between real and virtual fittings, personal information leakage risk, and etc were pointed out as demerits. The mass customization, customized garment connected with medical service, humanized avatar, improved fitting report, entertainment, coordination, wardrobe manager were proposed as improvement plan.

• Journal of Conservation Science
• /
• v.35 no.1
• /
• pp.71-80
• /
• 2019

This study examined the applicability of digital technologies based on three-dimensional(3D) scanning, modeling, and printing to the restoration of damaged artifacts. First, 3D close-range scanning was utilized to make a high-resolution polygon mesh model of a roof-end tile with a missing part, and a 3D virtual restoration of the missing part was conducted using a haptic interface. Furthermore, the virtual restoration model was printed out with a 3D printer using the material extrusion method and a PLA filament. Then, the additive structure of the printed output with a scanning electron microscope was observed and its shape accuracy was analyzed through 3D deviation analysis. It was discovered that the 3D printing output of the missing part has high dimensional accuracy and layer thickness, thus fitting extremely well with the fracture surface of the original roof-end tile. The convergence of digital virtual restoration based on 3D scanning and 3D printing technology has helped in minimizing contact with the artifact and broadening the choice of restoration materials significantly. In the future, if the efficiency of the virtual restoration modeling process is improved and the material stability of the printed output for the purpose of restoration is sufficiently verified, the usability of 3D digital technologies in cultural heritage restoration will increase.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.3 s.162
• /
• pp.463-474
• /
• 2007

With rapid expansion in e-retailing of apparel business, personalized fitting model service shows the possibility as the differentiated marketing strategy in cyber shopping. According as necessity of personalized fitting model construction rises, it is tried personalized fitting model creation in several fields such as computer engineering, mechanical engineering, information engineering. But, because existent study was concentrated only on human body modeling, it does not reflect average morphological characteristics of human body properly. In this study, we wish to examine if morphing is fit for expressing characteristic of average human body shape and suggest desirable morphing. We used 3-D scan data of 254 Korean middle aged men collected by Size Korea 2004. The result of this study are as follows: Lower body types were categorized by height hip girth and lower drop(hip girth-navel girth) which were main factors of lower body shape. Then each factor was divided into 3 groups respectively, 30% in the middle, over 30%, under 30%. In 27 groups, the group which belonged to 30% in the middle of height, 30% in the middle of hip girth, 30% in the middle of lower drop was selected as a representative group. We tested geometrical figure by differ volume, tilt, position of point. And we created a representative type of men's lower bodies by morphing the representative group and analyzed it's horizontal, vertical sections. A representative type which was created by morphing reflected a real body and changed realistically at the part of hip, crotch, calf muscle and so on. A cross sections of a representative type were similar to average cross sections of the representative group in size and shape. So it was proved that morphing was successful.

• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.301-314
• /
• 2017

This study focused on the movement adaptability of $19^{th}$ century classical opera stage costumes. Researchers focused on a basic $19^{th}$ century women's jacket. The study analyzed movement adaptability using ROM (range-of-motion) tests of the upper limb flexion and abduction postures. It developed two research garments to mimic basic $19^{th}$ century style jackets with or without gussets at the axilla. The ROM experiment identified the gusset size as 11cm in length. Experimental postures included upper limb flexion and abduction. The study measured subjective comfort at 8 postures. These postures included the flexion and abduction of the arms and torso. Subjects also evaluated the subjective comfort of the rotation posture of the torso. Researchers evaluated the similarities between research garments' silhouettes and the $19^{th}$ century women's jacket. The study used a 3D virtual fitting system to evaluate fit, and specialists further analyzed fit with photographs and 3D virtual graphics. The results are as follows. The silhouettes of both research garments were similar to the silhouettes of the $19^{th}$ century western women's jacket. The jacket with axilla gusset had a better fit than the basic style jacket. The basic style jacket without the axilla gusset showed limited movement adaptability at the shoulder joint and it caused discomfort at the axilla and elbow. The 3D virtual fit test was not a suitable method for analyzing silhouette similarity.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.744-757
• /
• 2021

This study aims to develop a bodice and a jacket in 3D of the late 19th to early 20th based on the pattern drafting book of Gordon S. S., which contains body measurement method and pattern drafting system. The findings of this research are as follows. First, female tops of the late 19th to early 20th century are categorized as outer, jacket, vest, and bodice. Of these, this study highlights the jacket, which can be divided into 4 types: 4 kinds of basic jacket, 2 kinds of riding jacket, bolero jacket, and newmarket jacket. Second, by referring to Gordon's pattern drafting system and book, a bodice was developed in 3D format based on the adherence to the following steps: analysis of the pattern drafting system, pattern drafting, 3D virtual simulation, 3D virtual fitting analysis, and the pattern correction. A bodice pattern corrected by 3D virtual clothing simulation results was proposed. Last, a basic sleeve and collar pattern for a basic jacket was drafted, which was followed by the correction and transformation of the bodice pattern. The jacket developed shows great fit except for the issues at the armhole line and shoulder, which were caused by the unique shape of the sleeves(big sleeve head) of the time. The study attempted to develop the past costumes in 3D, providing the basis for interdisciplinary research in the field of fashion history field and suggesting a new approach for the virtual restoration of costumes. Future studies should target to 3D virtual simulation in accordance to the 3D avatar pose in the developed virtual costume.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.587-589
• /
• 1997

The virtual surgical trial of TAH is very important in some points as follows. The chests of patients who is under heart-disease are various types of undefine form. It is hard to say that there exist the standard shape of TAH and the position to surgern. So, the virtual surgery system is very important in realizing TAH surgery of human. We have implemented virtual surgery system of TAH that supporting multi volume fitting trial. We have acquired CT images of patients with DICOM format. Each organ of patients was segmented in 2-dimensional CT images. 3-dimensional objects were made with marching cube algorithm and save as file in VRML format. Virtual fitting trial was performed on Cosmo-World; a VRML editor. The collision points of TAH with other organs were well observed. And the best position and angles were determined and saved or each case. We believed that this virtual surgery will be helpful in TAH surgery and TAH customizing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.7
• /
• pp.1184-1196
• /
• 2010

Several applications of body scanning technology have been commercialized or are currently under development. The virtual fit from 3D scans is most advanced form of virtual try-on. This article is an analysis of the comparison of user preferences for domestic versus foreign 3D virtual try-on systems. For this study, domestic i-Fashion Mall (www.ifashionmall.co.kr) and a Canadian company, My Virtual Model (www.mvm.com) were selected as the most representative online retailers that offer a virtual try-on system. The respondents were comprised of 70 Korean female college students in the age group 20-29. A five point Likert scale was used to evaluate the degree of the preference of virtual avatar and try-on images. T-test, cross table, and a chi-square independence test were conducted for data analysis. The results are as follow. 1. The representation about current looks according to each virtual fit image indicates that MVM is more accurate than i-Fashion Mall. 2. About decision confidence, respondents have decision confidence in i-Fashion Mall in the case of the avatar image; however, respondents have confidence in MVM or the fit image. 3. There were no significant differences in among waist size groups in accuracy, trust of each avatar image, while there were significant differences among waist size groups in the accuracy and trust of each virtual fit image. 4. About ease of use, respondents answered that i-Fashion Mall is superior to MVM. 5. The respondents prioritized the ‘fitting report’ of i-Fashion Mall and ‘Weight loss’ of MVM over other functionalities.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.2
• /
• pp.1-10
• /
• 2005

This study intends to examine extensively on the current situation where the full capacity of 3D CG is not being highlighted because of the lack of the information and the awareness and to look at how the virtual reality technology is being applied ranging from the design of the clothes to the marketing. A set of processes ranging from the development of the clothing design to the marketing will be performed on the web. Designers will design with 3D CG and make the patterns and will hand this over to the producer together with the virtual swatch. But there are important problems to work out. First, it is the problem of the virtual fitting room. Second, it is the absence of the 3D CG, which is easy and convenient for the clothing design. Third, it is to perfect the visual reconstruction. Fourth, it is the security of the distribution system. Fifth, it also calls for the strengthened internet network that can smooth the flow of the tremendous data. Consumer will be able to produce according to their needs and will become designer and producer at the same time, resulting in the achievement of the consumer-oriented marketing in real sense.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.2
• /
• pp.1-8
• /
• 2009

This paper introduces a virtual dress up system, according to user's input model and garment image. At first step, we deform the garment image by using skeleton structures and ARAP method. Next step, sampling the boundary points and find their matching vertices which are used for optimizing the boundary fitting. In 2D rendering of the dress up, they have some unrealistic results, so we reconstruct the garment mesh to the 3D mesh. Rendering from the reconstructed 3D mesh, we can get the final dress up result. We present that our system produce a visually plausible and well-fitted virtual dress up results.