• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.799-805
• /
• 2015

The further development of information, communication and digital media technologies requires the use of advanced, miniaturized semiconductor chips that operate at a high frequency. Die bonding and wire bonding methods for semiconductor packaging have been replaced by direct attachment to the substrate after forming a bump on the chip. However, the height of the bump or ball is an important factor for defects during assembly. This paper proposes an algorithm to measure the height of the bumps or balls in semiconductor packaging with greater accuracy. The performance of the proposed algorithm is experimentally validated. Non-contact 3D measurements of a shiny round ball is quite difficult, and it is not easy to obtain accurate data. This paper thus proposes an optical method and technique to improve the measurement accuracy.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.54-61
• /
• 1999

Three dimensional CAD data viewer helps a user to view and use many different types of CAD data without having costly programs that produced them loaded on their computers. A viewer for standard data formats such as STEP and IGES is more useful since most of the CAD systems provide translators for them. We developed a 3D CAD viewer for STEP AP203 solid and assembly data. In addition to the standard shading and assembly tree display, functions for 3D markups and measurement of distance and angles were implemented.

• Journal of Engineering Education Research
• /
• v.11 no.2
• /
• pp.79-89
• /
• 2008

The purpose of this study is to research the women engineers' recognition with a triangulation method and make suggestions on desirable education in engineering. The research period is for about 4 months from December 15, 2007 to April 4, 2008. The objects of the research are two groups of female engineers at D college located in the metropolitan area - the first group had 187 women engineering majors, 3 women graduate students and 2 women professors in engineering department, and the second group had 5 women engineering majors who once stayed out of school temporarily, 4 women engineering graduates, and 5 graduates who are currently working. The second group is intently selected in order to look into the detailed factors that affect the recognition of women engineers. The methods of the research varied and included were surveys on the web, personal interviews, focus meetings, surveys by e-mail and telephone, etc. The results of the study show what the women engineers want in engineering education includes to have role models of women engineers who can cast a vision to them, get a leadership training especially for when they lead a group that has both man and woman members. It was also found that experincing a cooperative learning through diverse projects is essential to build basic character training and competency, and practical education is required for the major or becoming a full time worker.

• Investigative Magnetic Resonance Imaging
• /
• v.16 no.1
• /
• pp.55-66
• /
• 2012

Purpose : During brain MRI scanning, subject's head motion can adversely affect MRI images. To minimize MR image distortion by head movement, we developed an optical tracking system to detect the 3-D movement of subjects. Materials and Methods: The system consisted of 2 CCD cameras, two infrared illuminators, reflective sphere-type markers, and frame grabber with desktop PC. Using calibration which is the procedure to calculate intrinsic/extrinsic parameters of each camera and triangulation, the system was desiged to detect 3-D coordinates of subject's head movement. We evaluated the accuracy of 3-D position of reflective markers on both test board and the real MRI scans. Results: The stereo system computed the 3-D position of markers accurately for the test board and for the subject with glasses with attached optical reflective marker, required to make regular head motion during MRI scanning. This head motion tracking didn't affect the resulting MR images even in the environment varying magnetic gradient and several RF pulses. Conclusion: This system has an advantage to detect subject's head motion in real-time. Using the developed system, MRI operator is able to determine whether he/she should stop or intervene in MRI acquisition to prevent more image distortions.

• Journal of the HCI Society of Korea
• /
• v.2 no.2
• /
• pp.1-9
• /
• 2007

In this paper, we propose a reconstruction technique of the lost hair region for 3D human actor modeling. An active depth sensor system can simultaneously capture both color and geometry information of any objects in real-time. However, it cannot acquire some regions whose surfaces are shiny and dark. Therefore, to get a natural 3D human model, the lost region in depth image should be recovered, especially human hair region. The recovery is performed using both color and depth images. We find out the hair region using color image first. After the boundary of hair region is estimated, the inside of hair region is estimated using an interpolation technique and closing operation. A 3D mesh model is generated after performing a series of operations including adaptive sampling, triangulation, mesh smoothing, and texture mapping. The proposed method can generate recovered 3D mesh stream automatically. The final 3D human model allows the user view interaction or haptic interaction in realistic broadcasting system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.2 s.314
• /
• pp.144-152
• /
• 2007

We propose a 3D modeling method for surface inspection of non-linear moving object. The laser lines reflect the surface curvature. We can acquire 3D surface information by analyzing projected laser lines on object. ill this paper, we use multi-line laser to make use of robust of single stripe method and high speed of single frame. Binarization and channel edge extraction method were used for robust laser line extraction. A new labeling method was used for laser line labeling. We acquired sink information between each 3D reconstructed frame by feature point matching, and registered each frame to one whole image. We verified the superiority of proposed method by applying it to container damage inspection system.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1817_1818
• /
• 2009

Disparity 맵은 스테레오 카메라의 이미지 평면에 동일한 3차원 포인터를 나타내는 픽셀간의 차이를 나타내는 이미지이다. 이는 3차원 정보를 얻기 위하여 생성 한며 생성된 Disparity 맵은 Triangulation을 이용하여 3차원 복원이 가능하다. Disparity 맵은 픽셀의 intensity의 차를 이용하여 구하므로 Repeated Pattern 이나 Textureless 부분에서 많은 에러가 생기는 문제가 있다. 본 논문에서는 이런 문제점을 해결하기 위하여 싱글 카메라와 레이저 레인지 파인더의 캘리브레이션을 통해 알아낸 기하학적인 관계를 이용하여 3차원 정보를 카메라의 이미지 평면으로 역 사영 시켜서 Disparity 맵을 생성하는 알고리즘을 제안한다. 이 방법은 기존의 스트레오 카메라 기반으로 Disparity 맵을 생성하는 경우에 생기는 Repeated Pattern 이나 Textureless 부분의 문제를 해결 할 수 있다는 것을 실험을 통하여 검증 하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.321-329
• /
• 2015

This paper addresses a new algorithm for a stereo visual odometry to measure the ego-motion of a vehicle. The new algorithm introduces an inlier grouping method based on Delaunay triangulation and vanishing point computation. Most visual odometry algorithms rely on RANSAC in choosing inliers. Those algorithms fluctuate largely in processing time between images and have different accuracy depending on the iteration number and the level of outliers. On the other hand, the new approach reduces the fluctuation in the processing time while providing accuracy corresponding to the RANSAC-based approaches.

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.457-464
• /
• 2014

Recently, interests in space information data are increasing due to the initiation of spatial information open platform service by the Ministry of Land, Infrastructure and Transport. The purpose of this study is optimizing management and storing of the texture data, one kinds of 3D-spatial data. First, extract 3D-spatial data through the aerial triangulation and 3D-writing using raw image taken with the Multi-directional aerial camera and the vertical aerial camera. And develop the method to create single texture data and related technique by align and place corresponding 3D-spatial data to optimal storage space. Through experiment, the results show effect of 8 times of storage capacity reduction compared to existing single-file storage method, additionally, new method can improve file management efficiency in comparison with multiple file storage method. The results of this study can be cornerstone of three-dimensional space information management when dealing with bulk data, and utilizations will be enhanced through the further studies and algorithm improvement.