• 제목/요약/키워드: 3D to 2D development

검색결과 4,577건 처리시간 0.04초

3D 스테레오스코픽(Stereoscopic)기술의 효율적 활용에 관한 연구 (Research on Efficient Usage of 3D Stereoscopic Technology)

  • 김지수
    • 한국콘텐츠학회논문지
    • /
    • 제10권2호
    • /
    • pp.138-145
    • /
    • 2010
  • 입체영상 기술은 차세대 입체 멀티미디어 정보통신 분야에서 공통적으로 요구되는 핵심 기반기술이라 할 수 있다. 현실과 가까운 자연스러운 영상을 표현하고자 하는 입체영상의 구현은 인간이 끊임없이 노력해온 부분으로, 초기의 시각 인식체계에서 시작해 양안시차를 이용한 입체사진을 거쳐 동영상 입체시대로 이행 되었다. 생활이 변화하고, 새로운 문화가 형성되고, IT산업 확장 등 핵심 트렌드의 바탕에는 가상을 실제처럼 구현하는 기술의 발전이 있으며, 그 중심에는 3D 입체영상 기술이 있다. 본 논문에서는 3D 입체영상 기술개발 동향 및 개발전략을 살펴보고, 지속적인 시장 확대를 위한 3D 입체영상 기술의 효율적 활용방안을 제시하고자 한다.

AR과 3D 프린팅 객체를 연계한 건설공사 4D 시스템 구성 연구 (Development of 4D System Linking AR and 3D Printing Objects for Construction Porject)

  • 박상미;김현승;문현석;강인석
    • 대한토목학회논문집
    • /
    • 제41권2호
    • /
    • pp.181-189
    • /
    • 2021
  • 건설현장에서 가상현실 BIM객체의 활용성을 높이기 위해서는 실제 이미지와의 이질감을 해소시켜야 하며, 공정관리 분야 적용시에는 가상현실 공정모습과 실제 공정모습간의 괴리감을 감소시킬 필요가 있다. 연구에서는 이러한 부분을 해소하기 위해 AR (Augmented Reality)과 3D 프린팅 기술이 연계된 4D 모델기반 공정관리 시제품을 구성하여 두 기술이 연동된 4D모델의 활용 가능성을 검토한다. 입체적인 3D 출력물과 AR객체를 접목하여 시공 공정 시뮬레이션을 구현하면 단순한 가상현실기반 4D 모델과 비교시 실체적 이미지기반의 정보로 보다 직관적인 공정 정보를 제공할 수 있다. 이를 위해 연구에서는 3D 프린팅 출력물에 마커를 이용하여 후속공정이 4D 모델로 시뮬레이션되는 AR구현 체계의 방법론 및 시스템 구성의 적정성을 검토한다.

세포조작 기술을 이용한 새로운 축산개량증식 체계 개발 II. Cytochalasin D의 처리시간과 농도가 소 난포란의 단위발생의 활성화와 발달에 미치는 효과 (Development of a New Improvement and Multiplication System in Domestic Animals Using a Embryonic Manipulation Technique II. Effects of Duration and Concentraton of Cytochalasin D on Parthenogenetic Activation and Development of Bovine Follicular Oocyte)

  • 임경순;김현종
    • 한국가축번식학회지
    • /
    • 제19권3호
    • /
    • pp.191-195
    • /
    • 1995
  • 본 연구는 체외성숙한 소의 난포란을 ethanol로 활성화시켰을 때 cytochalasin에 노출한 시간과 농도가 난포란의 배반포단계로의 발달에 미치는 영향을 검토하였다. 30시간 체외성숙시킨 소 난포란을 7% ethanol이 든 Dulbecco's phosphate buffered saline에 7분간 노출시켜 활성화를 시킨 후, cytochalasin D가 첨가된 TCM+199+10% fetal calf serum에서 일정시간 배양하여 세포주기를 억제시켰다. 난포란을 활성화시킨 후, 0, 5, 10 그리고 15시간 cytochalasin D(5$\mu\textrm{g}$/ml)에 노출시켰을 때, 5시간에서 가장 높은 배반포(16%), 팽윤배반포(13%), 부화배반포(7%)로의 발달률을 보였다. 또한 cytochalasin D 0, 2.5, 5 그리고 7.5$\mu\textrm{g}$/ml에서 7시간 노출시켰을 때, 2.5$\mu\textrm{g}$/ml에서 가장 높은 배반포(13%), 팽윤배반포(7%), 부화배반포(4%)로의 발달률을 보였다. 결론적으로 cytochalasin D는 난폰란의 단위발생에 중요한 역할을 하며, 성숙한 난포란은 cytochalasin D 2.5$\mu\textrm{g}$/ml에서 5시간 노출하였을 때 가장 높은 배반포로의 발달률을 보여주었다.

  • PDF

건설 분야 도면정보 교환 표준을 위한 3차원 와이어프레임 기반의 확장 모델 개발에 관한 연구 (Development of an Extension Model based on Three Dimensional Wireframe Model for KOSDIC Format in the Construction Field)

  • 김인한;서종철;원지선
    • 한국CDE학회논문집
    • /
    • 제10권3호
    • /
    • pp.179-187
    • /
    • 2005
  • The usage of mixed 2D and 3D CAD data of commercial CAD systems is required in the construction practice. Sometimes 3D wireframe model is required by end-users when 2D CAD data is delivered. However, current KOSDIC can not represent 3D CAD data, because it has been developed as a 2D drawing delivery standard. Therefore, this study is to provide exchange and sharing of mixed 2D and 3D CAD data that add 3D wireframe model in the KOSDIC. To achieve this purpose, the authors have investigated the 3D CAD entities of commercial CAD systems, and have analyzed STEP standards providing 3D wireframe model. The result, the authors have extracted 3D CAD common entities based wireframe model which shall be added in the KOSDIC. This study can be beneficial by using the developed data model for heterogeneous CAD systems, and by providing the representation of mixed 2D and 3D CAD data in construction practice such as GIS, piping system, and so forth.

Novel Robust Structure and High k Dielectric Material for 90 nm DRAM Capacitor

  • Park, Y.K.;Y.S. Ahn;Lee, K.H.;C.H. Cho;T.Y. Chung;Kim, Kinam
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제3권2호
    • /
    • pp.76-82
    • /
    • 2003
  • The robust stack storage node and sufficient cell capacitance for high performance is indispensable for 90 nm DRAM capacitor. For the first time, we successfully demonstrated MIS capacitor process integration for 90 nm DRAM technology. Novel cell layout and integration technology of 90 nm DRAM capacitor is proposed and developed, and it can be extended to the next generation DRAM. Diamond-shaped OCS with 1.8 um stack height is newly developed for large capacitor area with better stability. Furthermore, the novel $Al_2O_3/HfO_2$ dielectric material with equivalent oxide thickness (EOT) of 25 ${\AA}$ is adopted for obtaining sufficient cell capacitance. The reliable cell capacitance and leakage current of MIS capacitor is obtained with ~26 fF/cell and < 1 fA/ceil by $Al_2O_3/HfO_2$ dielectric material, respectively.

Computerized Human Body Modeling and Work Motion-capturing in a 3-D Virtual Clothing Simulation System for Painting Work Clothes Development

  • Park, Gin Ah
    • 패션비즈니스
    • /
    • 제19권3호
    • /
    • pp.130-143
    • /
    • 2015
  • By studying 3-D virtual human modeling, motion-capturing and clothing simulation for easier and safer work clothes development, this research aimed (1) to categorize heavy manufacturing work motions; (2) to generate a 3-D virtual male model and establish painting work motions within a 3-D virtual clothing simulation system through computerized body scanning and motion-capturing; and finally (3) to suggest simulated clothing images of painting work clothes developed based on virtual male avatar body measurements by implementing the work motions defined in the 3-D virtual clothing simulation system. For this, a male subject's body was 3-D scanned and also directly measured. The procedures to edit a 3-D virtual model required the total body shape to be 3-D scanned into a digital format, which was revised using 3-D Studio MAX and Maya rendering tools. In addition, heavy industry workers' work motions were observed and recorded by video camera at manufacturing sites and analyzed to categorize the painting work motions. This analysis resulted in 4 categories of motions: standing, bending, kneeling and walking. Besides, each work motion category was divided into more detailed motions according to sub-work posture factors: arm angle, arm direction, elbow bending angle, waist bending angle, waist bending direction and knee bending angle. Finally, the implementation of the painting work motions within the 3-D clothing simulation system presented the virtual painting work clothes images simulated in a dynamic mode.

Comparison of Drying Yield, Meat Quality, Oxidation Stability and Sensory Properties of Bone-in Shell Loin Cut by Different Dry-aging Conditions

  • Cho, Soohyun;Kang, Sun-Moon;Kim, Yun-Seok;Kim, Young-Chun;Ba, Hoa Van;Seo, Hyun-Woo;Lee, Eun-Mi;Seong, Pil-Nam;Kim, Jin-Hyoung
    • 한국축산식품학회지
    • /
    • 제38권6호
    • /
    • pp.1131-1143
    • /
    • 2018
  • This study aimed to investigate the drying yield, meat quality, oxidation stability and sensory properties of Hanwoo beef loin subjected to different dry-aging conditions. A total of 54 Hanwoo beef loins (bone-in, $6^{th}-13^{th}$ ribs) with fat cover at 2 d postmortem were assigned to four groups and hung in a dry-aging room at a controlled temperature ($2^{\circ}C-4^{\circ}C$), humidity (65%-85%) and air velocity (3 m/s). Four treatment conditions were tested; the respective temperature, humidity and treatment duration are as follows: T1, $2^{\circ}C$, 85%, 60 d; T2, $2^{\circ}C$, 65%, $20d+2^{\circ}C$, 75%, $20d+4^{\circ}C$, 85%, 20 d; T3, $2^{\circ}C$, 75%, $20d+4^{\circ}C$, 85%, 40 d; T4, $4^{\circ}C$, 85%, 60 d. The drying yield, total aerobic counts and fat contents increased, whereas the moisture content, meat color (CIE $L^*$, $a^*$, and $b^*$), and Warner-Bratzler shear force values decreased significantly during the aging period for all treatments (p<0.05). The cooking loss (%) did not change significantly until 40 d, and it was significantly higher in T1 and T4 than in T2 and T3 at 60 d (p<0.05). The water-holding capacity, pH and lipid oxidation [thiobarbituric acid reactive substance (TBARS) values] increased during aging (p<0.05). The sensory scores for tenderness, juiciness, flavor, and overall acceptability of dry-aged loin muscles increased as the aging period increased. T2 and T3 had significantly higher sensory scores and T1 had significantly lower scores for tenderness, juiciness, flavor, and overall acceptability at 20, 40, and 60 d for loin muscles (p<0.05).

손 치수 측정을 위한 3차원 반자동 측정 방법 개발 (Development of a 3D Semi-Automatic Measurement Protocol for Hand Anthropometric Measurement)

  • 이원섭;윤성혜;유희천
    • 산업공학
    • /
    • 제24권2호
    • /
    • pp.105-111
    • /
    • 2011
  • Measurement protocols for hand anthropometry have been studied for ergonomic product design. The present study developed a 3D semi-automatic measurement protocol (3D-SAMP) which semi-automatically measures various hand dimensions using a 3D scanner. The 3D-SAMP was compared with the conventional direct measurement method (DMM) to examine its effectiveness. The 3D-SAMP consists of (1) fabricating a plaster cast of the hand, (2) placing landmarks on the plaster hand, (3) scanning the plaster hand with a 3D scanner, (4) identifying automatically the positions of the landmarks on the digital hand, and (5) extracting automatically hand anthropometric measurements (lengths, widths, thicknesses, and circumferences). An evaluation experiment conducted in the study found the 3D-SAMP preferred to the DMM in terms of reliability (the number of dimensions exceeding the variability criteria SD=2 mm and CV=5% : 3D-SAMP =2 and DMM=24) and ease of measurement (3D-SAMP=5.2 and DMM=4.3 out of 7). The 3D-SAMP can be applied to ergonomic design of a hand-held product.

지하시설물의 3차원 표현을 위한 공간 데이터 변환 시스템의 객체 지향적 설계 및 구현 (The Object-Oriented Design & Implementation of Spatial Data Transformation System for the 3-D Representation of Underground Utilities)

  • 오승;강병익;정정화
    • 한국GIS학회:학술대회논문집
    • /
    • 한국GIS학회 1996년도 춘계학술대회 발표요약문
    • /
    • pp.79-109
    • /
    • 1996
  • 본 연구에서는 상용 CIS 소프트웨어인 ARC/INFO에 구축되어 있는 지하 시설물 데이터를 3차원 공간 객체로 변환하기 위하여 3차원 공간 객체의 형식과 객체 저장 구조를 정의하고, 2차원의 지하 시설물 데이터를 정의된 3차원 공간 객체로 변환하는 공간 데이터 변환 시스템을 객체 지향 개발 기법인 Booch의 방법을 사용하여 개발하였다. 이를 위하여 ARC/INFO의 관계형 데이터 모델과 저장 구조를 분석하고, 지하 시설물의 3차원 시각화를 위한 요구 조건들을 분석하였다. 그리고 ARC/INFO에 저장된 2차원 지하 시설물 데이터는 내부적인 전처리 과정을 통하여 ASCII 파일로 변환 후, 변환 시스템의 입력 자료로 사용하였고, 변환 시스템의 개발을 위한 개발 방법으로 Booch의 방법을 선정하여 시스템의 분석과 설계 과정에 적용하였다. 마지막으로 분석과 설계의 결과를 ARC/INFO의 매크로 언어인 AML과 객체 지향 프로그래밍 언어인 C++를 사용하여 구현하였다. 본 연구의 결과, 지하 공간에 존재하는 2차원 시설물들을 3차원으로 시각화 할 수 있는 3차원 공간 객체를 얻을 수 있었으며, 시스템의 개발 과정에 객체 지향 개발 기법을 적용함으로써 효율적인 개발을 수 행할 수 있었다.

  • PDF

하지기형 교정 수술을 위한 2D-3D 영상 정합기술 (Development of 2D-3D Image Registration Techniques for Corrective Osteotomy for Lower Limbs)

  • 라인찬;봉재환;박신석
    • 한국정밀공학회지
    • /
    • 제30권9호
    • /
    • pp.991-999
    • /
    • 2013
  • Lower limbs deformity is a congenital disease and can also be occurred by an acquired factor. This paper suggests a new technique for surgical planning of Corrective Osteotomy for Lower Limbs (COLL) using 2D-3D medical image registration. Converting to a 3D modeling data of lower limb based on CT (computed tomography) scan, and divide it into femur, tibia and fibula; which composing the lower limb. By rearranging the model based on the biplane 2D images of X-ray data, a 3D upright bone structure was acquired. There are two ways to array the 3D data on the 2D image: Intensity-based registration and feature-based registration. Even though registering Intensity-based method takes more time, this method will provide more precise results, and will improve the accuracy of surgical planning.