• Title/Summary/Keyword: 3D television

Search Result 494, Processing Time 0.025 seconds

Implementation of Switched Digital Video Using Convergence Transmission of Broadcasting and Communication on Cable TV Broadcasting Network (케이블 방송망에서 방송통신 융합 전송을 이용한 스위치드 디지털 비디오 구현)

  • Jung, Joon-Young;Cho, Yong-Sung;Choi, Dong-Joon;Hur, Namho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.41 no.3
    • /
    • pp.359-364
    • /
    • 2016
  • As cable TV networks have a media feature that is a broadband wire network, they can provide not only TV broadcasting services but also communication services. Accordingly, the cable TV network is mentioned as the optimal network for convergence of broadcasting and communication services. Recently, Available frequencies of the cable TV network have become insufficient as enhancement of video quality, increment of VoD service, and growth of high-speed internet service. This paper presents a new implementation method of switched digital video (SDV) technology that is introduced for obtaining additional frequency band. In the SDV system, only TV channels requested from viewer are sent and non-requested channels are dropped. The presented SDV uses a sharing method of TV broadcasting and communication service in a same frequency band. This method shows increase of spectrum efficient from switching of TV service channels without building a complex system.

3D DMB 방송 서비스 기술

  • Jeong, Gwang-Hui;Lee, Bong-Ho;Yun, Guk-Jin;Heo, Nam-Ho;Lee, Su-In
    • Information and Communications Magazine
    • /
    • v.26 no.10
    • /
    • pp.11-17
    • /
    • 2009
  • 이동 TV라고 일컬어지는 DMB는 2009년 8월 현재 2천 만대 이상의 단말이 판매되어 사용자에게 시간과 장소에 구애받지 않고 이동 TV를 비롯한 다양한 형태의 데이터 서비스를 제공하는 이동방송 시스템으로 자리 잡아 가고 있다. 또한 사용자에게 보다 더 유익한 서비스 제공을 위해 양방향 웹 기술을 축으로 하는 DMB2.0이 곧 상용화될 예정이다. 본 고에서는 향후 이동방송 서비스가 진화할 것으로 예상되는 실감 방송이라고 불리는 3D 방송서비스 및 관련 기술 개발 동향을 소개하고자 한다.

TOPOLOGICAL ENTROPY OF EXPANSIVE FLOW ON TVS-CONE METRIC SPACES

  • Lee, Kyung Bok
    • Journal of the Chungcheong Mathematical Society
    • /
    • v.34 no.3
    • /
    • pp.259-269
    • /
    • 2021
  • We shall study the following. Let 𝜙 be an expansive flow on a compact TVS-cone metric space (X, d). First, we give some equivalent ways of defining expansiveness. Second, we show that expansiveness is conjugate invariance. Finally, we prove that lim sup ${\frac{1}{t}}$ log v(t) ≤ h(𝜙), where v(t) denotes the number of closed orbits of 𝜙 with a period 𝜏 ∈ [0, t] and h(𝜙) denotes the topological entropy. Remark that in 1972, R. Bowen and P. Walters had proved this three statements for an expansive flow on a compact metric space [?].

View Synthesis Error Removal for Comfortable 3D Video Systems (편안한 3차원 비디오 시스템을 위한 영상 합성 오류 제거)

  • Lee, Cheon;Ho, Yo-Sung
    • Smart Media Journal
    • /
    • v.1 no.3
    • /
    • pp.36-42
    • /
    • 2012
  • Recently, the smart applications, such as smart phone and smart TV, become a hot issue in IT consumer markets. In particular, the smart TV provides 3D video services, hence efficient coding methods for 3D video data are required. Three-dimensional (3D) video involves stereoscopic or multi-view images to provide depth experience through 3D display systems. Binocular cues are perceived by rendering proper viewpoint images obtained at slightly different view angles. Since the number of viewpoints of the multi-view video is limited, 3D display devices should generate arbitrary viewpoint images using available adjacent view images. In this paper, after we explain a view synthesis method briefly, we propose a new algorithm to compensate view synthesis errors around object boundaries. We describe a 3D warping technique exploiting the depth map for viewpoint shifting and a hole filling method using multi-view images. Then, we propose an algorithm to remove boundary noises that are generated due to mismatches of object edges in the color and depth images. The proposed method reduces annoying boundary noises near object edges by replacing erroneous textures with alternative textures from the other reference image. Using the proposed method, we can generate perceptually inproved images for 3D video systems.

  • PDF

Evaluation of Swine Wastewater Pretreatment Using Anaerobic Filter (Anaerobic Filter에 의한 양돈폐수의 전처리 특성 평가)

  • Kang, Ho;Moon, Seo-yeon
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.37 no.7
    • /
    • pp.418-425
    • /
    • 2015
  • Anaerobic Filters (AF) packed with porous ceramic floating media were operated at different operational conditions to identify the feasibility of the renewable bioenergy, methane production from swine wastewater and to verify the suitability of effluent from anaerobic filters for the subsequent biological nitrogen and phosphorus removal. Stepwise increase in organic loading rates (OLRs) or decrease in hydraulic retention times (HRTs) with influent TCOD concentration of 14,000 mg/L were utilized at mesophilic temperature. The maximum methane productivity of 1.74 volume of $CH_4$ per volume of reactor per day (v/v-d) was achieved at an hydraulic retention time (HRT) of 0.5 day (OLR 28 g TVS/L-d). Based on the biogas production, the highest total volatile solids (TVS) removal efficiency of 63% was obtained at an HRT of 3 days (OLR 4.67 g TVS/L-d), however based on the result from the effluent total chemical oxygen demand (TCOD) analysis, the highest TCOD removal efficiency of 75% was achieved. The effluent alkalinity concentration over the range of 2,050~2,980 mg/L as $CaCO_3$ at all operational conditions, could compensate the alkalinity destruction caused by nitrification. The effluent from the anaerobic filter operated under the HRT of 2 days showed the COD/TKN ratio of 15~35 and COD/TP ratio of 38~56. Therefore effluent C/N/P ratio is able to satisfy the optimum COD/TKN ratio of greater than 8.0 and COD/TP ratio of 33 for the subsequent biological nutrient removal.

Design and Implementation of JPEG Image Display Board Using FFGA (FPGA를 이용한 JPEG Image Display Board 설계 및 구현)

  • Kwon Byong-Heon;Seo Burm-Suk
    • Journal of Digital Contents Society
    • /
    • v.6 no.3
    • /
    • pp.169-174
    • /
    • 2005
  • In this paper we propose efficient design and implementation of JPEG image display board that can display JPEG image on TV. we used NAND Flash Memory to save the compressed JPEG bit stream and video encoder to display the decoded JPEG mage on TV. Also we convert YCbCr to RGB to super impose character on JPEG image. The designed B/D is implemented using FPGA.

  • PDF

Implementation and Evaluation of the 100 Watt High Power Amplifier for Broadband Digital TV Repeater (광대역 디지털TV 중계기용 100 Watt 고출력증폭기의 구현 및 특성 측정에 관한 연구)

  • Sung, Jeon-Joong
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.31 no.5
    • /
    • pp.575-582
    • /
    • 2007
  • In this paper, a 100 Watt high power amplifier has been implemented and performed evaluation, which is operating at UHF band ($470\;{\sim}\;806\;MHz$) for Digital TV repeater. To achieve increase of bandwidth and high power capability, 3-way power combiner and divider of Wilkinson type was adopted. In order to measure the fabricated 100 Watt power amplifier, the estimation technique function which makes equivalent mask was used. As a result of the measurement, the existence of pilot signal is confirmed and the signal transmitted at the rated output power 100 Watt is brought out the flat feature through 6 MHz bandwidth. and it resulted that its value was less than -47 dB at the edge of radiation channel and less than -110 dB at more than 6 MHz position from channel edge.

Optimal Design of Slim TV Wall Mount Arm with Cantilever Structure (외팔보 구조의 슬림형 TV 월마운트암의 최적설계)

  • Jang, Woon-Geun
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.14 no.4
    • /
    • pp.167-172
    • /
    • 2011
  • This paper investigated optimal design for slim wall mount arm for flat TV. Recently the number of flat TV sets in use went on increasing in TV market. As the flat TV sets are getting common, consumers came to need another requirements like aesthetic factor besides display performances. As the new TV sets tend to be slimmer due to aesthetic design, Wall mount also requires to be slimmer for aesthetic balance. Slim structures, however, are vulnerable to structural rigidity. In this study, slim wall mount arm has been designed by 3D CAD and DOE (Design of Experiments) and finite element analysis for optimal structural design were carried out to determine the design variables for minimize working stress of wall mount arm. Finally two optimal design conditions were selected through DOE and FEM and one of those was chosen under constraint of minimizing blanking developed length.

Analysis of the Memory Usage Pattern in Virtualized Smart TV Environment (가상화 환경에서의 스마트 TV 메모리 사용 패턴 분석)

  • Kim, Taehun;Kim, Junghoon;Eom, Young Ik
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2012.11a
    • /
    • pp.1271-1272
    • /
    • 2012
  • 최근 스마트 TV는 멀티코어, 3D가속, 고속 네트워크 및 다양한 인터페이스 지원 등으로 인하여 성능이 향상되었다. 향후 스마트 TV는 씬-클라이언트인 이기종 단말기에게 홈 클라우드 서비스를 제공할 것으로 기대되고 있다. 홈 클라우드로서의 스마트 TV는 단말기 간의 보안과 다양한 서비스를 제공하기 위해 가상화가 기술이 필요하다. 그러나 가상화 환경에서의 스마트 TV는 다중의 가상 머신이 실행될 경우 메모리 부족으로 인해 스왑-아웃 문제를 유발한다. 본 논문에서는 스마트 TV의 메모리 사용 분석 및 ballooning을 통한 효율적인 호스트 메모리 관리의 필요성을 제시한다.