Journal of the Institute of Electronics Engineers of Korea SP
/
v.45
no.2
/
pp.49-64
/
2008
Recently, many researches about making more comfortable input device based on gaze detection technology have been done in human computer interface. However, the system cost becomes high due to the complicated hardware and there is difficulty to use the gaze detection system due to the complicated user calibration procedure. In this paper, we propose a new gaze detection method based on the 2D analysis and a simple user calibration. Our method used a small USB (Universal Serial Bus) camera attached on a HMD (Head-Mounted Display), hot-mirror and IR (Infra-Red) light illuminator. Because the HMD is moved according to user's facial movement, we can implement the gaze detection system of which performance is not affected by facial movement. In addition, we apply our gaze detection system to 3D first person shooting game. From that, the gaze direction of game character is controlled by our gaze detection method and it can target the enemy character and shoot, which can increase the immersion and interest of game. Experimental results showed that the game and gaze detection system could be operated at real-time speed in one desktop computer and we could obtain the gaze detection accuracy of 0.88 degrees. In addition, we could know our gaze detection technology could replace the conventional mouse in the 3D first person shooting game.
As an auxiliary tool for fixing the patient's posture when taking an X-ray, sponges with high radiolucencies are laminated in various thicknesses. This study aimed to evaluate the usefulness of an auxiliary tool for hand oblique projection X-ray by manufacturing it with a uniform thickness by 3D printing and comparing it with existing sponge tools. In the auxiliary tool, radiolucency was measured at the stairs where each finger was located, and pixel information values were compared in the digital imaging and communications in medicine(DICOM) image. Contrast to noise ratio(CNR) and signal to noise ratio(SNR) were compared by shooting the hand phantom and the auxiliary tool together. As the thickness of the sponge tool increased, radiolucency decreased by 15.52% and pixel information value increased by 20.61%. The transmittance of the 3D printing tool increased by 0.82%, and the pixel information value differed by 5.66%. CNR and SNR increased by 20.03% and 22.42% in 3D printing compared to existing sponge tools. while taking hand oblique projection, maintaining the thickness of the auxiliary tool uniformly through 3D printing maintains high radiolucency and minimal impact on medical images, and increases CNR and SNR, making it useful as an auxiliary tool for taking hand oblique projection.
This study investigates the merits of incorporating augmented reality in mobile games and proposes a mobile game application that combines augmented reality technology with gaming. The proposed study postulates that augmented reality technology can be employed for developing games on smartphones. The proposed application involves the implementation of a 3D virtual object in the real world by incorporating a target image. The proposed application also employs an intuitive interface with simplified manipulation based on touch, and allows players to collect and combine items for acquiring new items, thus making it elementary to pass the game stages. Furthermore, a ranking system has been introduced in the proposed application for enhancing the amusement factor of the game. The novelty of the proposed application lies in the fact that the virtual button function has been employed for combining physical and virtual objects while playing the game, without incorporating location-based services.
The goal of this research was to develop an efficient cryopreservation protocol for germplasms of yam (Diosorea batatas), that were cultivated in Korea. Comparative studies with four other cryogenic techniques and subsequent experiments for shoot regrowth were conducted. in vitro-grown shoot-apices of the D. batatas were successfully cryopreserved by encapsulation-dehydration. The maximum survival of shoot-apices could be achieved when the precultured (with 0.3 M of sucrose for one day) and encapsulated (with a 3%(w/v) Na-alginate solution) apices were dehydrated for $3.5{\sim}4\;h$ prior to direct immersion in LN (liquid nitrogen). The frequency of regrowth rate of cryopreserved apices was not decreased during 3-month storage period. The thawing method markedly affected survival of the cryopreserved apices, and thawing at $40^{\circ}C$ for 3 min produced the best results. When cryopreserved apices were post-cultured on the post-culture medium (MS), supplemented with $0.2mgl^{-1}$ of BA ($N_6$-benzyladenine) and $0.2mgl^{-1}$ of kinetin, they showed direct shooting without callusing.
Journal of the Korean Society of Industry Convergence
/
v.26
no.5
/
pp.775-784
/
2023
Drone images are being used more and more actively in the fields of surveying and spatial information, and are rapidly replacing existing aerial and satellite images. The technology of quickly acquiring real-time data at low cost and processing it is now being applied to actual industries beyond research. However, there are also problems encountered as this progresses. When high-resolution spatial information is acquired using a general 2D flight plan for a terrain with sever undulations, problems arise due to the difference in resolution of the data. In particular, when a low-altitude high-resolution image is taken using a drone in a mountainous or steep terrain, there may be a problem in image matching due to a resolution difference caused by terrain undulations. This problem occurs because a drone acquires data while flying on a 2D plane at a fixed altitude, just like conventional aerial photography. In order to acquire high-quality 3D data using a drone, the scale difference for the shooting distance should be considered. In addition, in order to obtain facade images of large structures, it is necessary to take images in 3D space. In this study, in order to improve the disadvantages of the 2D flight method, a 3D flight plan was established for the study area, and it was confirmed that high-quality 3D spatial information could be obtained in this way.
Active catalog is a kind of digital content that enables consumers to test the functions and features of products from their PCs as if they were using it in real life, by simulating the actions and responses of the product. This new type of interactive digital content can be used extensively to make sales personnel training manuals, sales tools, user manuals and user trouble shooting documents. With active catalogs, companies will be able to compare different designs, show actions according to different functions, and evaluate user reaction to new products without having to produce a single physical prototype or mock-up. At the same time, consumers will be able to understand and 'operate' the product and make well-informed purchase decisions. In this paper, we present a visual event-driven modeling tool, PlayMo, for creating active catalogs, analyze the advantages of using PlayMo, describe the event-driven method used by PlayMo and also introduce two enhanced characteristics of the Event Flow Chart with which the events in PlayMo are structured. Interactive digital content by using the PlayMo3D makes easy, simple and effective design for e-learning, e-catalogue, e-marketing/sales, e-prototyping, customer support, etc. Through its application-ready 3D function visualization solution, engineers and designers can rapidly turn a CAD design model into a 3D interactive virtual product, and the effective function prototyping job can be also completed within a minute.
Journal of the Korea Academia-Industrial cooperation Society
/
v.20
no.3
/
pp.587-593
/
2019
The field of geospatial information is rapidly changing due to the development of sensor and data processing technology that can acquire location information. And demand is increasing in various related industries and social activities. The construction and utilization of three dimensional geospatial information that is easy to understand and easy to understand can be an essential element to improve the quality and reliability of related services. In recent years, 3D laser scanners are widely used as 3D geospatial information construction technology. However, 3D laser scanners may cause shadow areas where data acquisition is not possible when objects are large in size or complex in shape. In this study, 3D model of an object has been created by acquiring oblique images using an unmanned aerial vehicle and processing the data. The study area was selected, oblique images were acquired using an unmanned aerial vehicle, and point cloud type 3D model with 0.02 m spacing was created through data processing. The accuracy of the 3D model was 0.19m and the average was 0.11m. In the future, if accuracy is evaluated according to shooting and data processing methods, and 3D model construction and accuracy evaluation and analysis according to camera types are performed, the accuracy of the 3D model will be improved. In the point cloud type 3D model, Cross section generation, drawing of objects, and so on, it is possible to improve work efficiency of spatial information service and related work.
Recently, as a part of the production of spatial information by smart cities, three-dimensional reproduction of structures for reverse engineering has been attracting attention. In particular, terrestrial LiDAR is mainly used for 3D reproduction of structures, and 3D reproduction research by UAS has been actively conducted. However, both technologies produce blind spots due to the shooting angle. This study deals with vertical structures. 3D model implemented through SfM-based image analysis technology using UAS and reproducibility and effectiveness of 3D models by terrestrial LiDAR-based laser scanning are examined. In addition, two 3D models are merged and reviewed to complement the blind spot. For this purpose, UAS based image is acquired for artificial rock wall, VCP and check point are set through GNSS equipment and total station, and 3D model of structure is reproduced by using SfM based image analysis technology. In addition, Through 3D LiDAR scanning, the 3D point cloud of the structure was acquired, and the accuracy of reproduction and completeness of the 3D model based on the checkpoint were compared and reviewed with the UAS-based image analysis results. In particular, accuracy and realistic reproducibility were verified through a combination of point cloud constructed from UAS and terrestrial LiDAR. The results show that UAS - based image analysis is superior in accuracy and 3D model completeness and It is confirmed that accuracy improves with the combination of two methods. As a result of this study, it is expected that UAS and terrestrial LiDAR laser scanning combination can complement and reproduce precise three-dimensional model of vertical structure, so it can be effectively used for spatial information construction, safety diagnosis and maintenance management.
The Journal of the Convergence on Culture Technology
/
v.8
no.5
/
pp.583-589
/
2022
Due to COVID-19, which has thrown the whole world into chaos, it has become an era where many technologies and contents are made non-face-to-face. At the same time, the popularity of the metaverse service is also increasing day by day, and the virtual costume (avatar) industry, one of the sub-industries, is also growing. In this study, we designed and developed a system for creating virtual costumes to be uploaded to ZEPETO, a mobile metaverse service. Unlike the existing service that requires a program that operates in a PC environment, it can be produced only by shooting and simple operation through a mobile device. With the advantage of being able to process all tasks of this system in a mobile environment, small businesses and individual operators who are not familiar with external programs will be able to more easily access the 3D virtual clothing industry.
Journal of Information Technology Applications and Management
/
v.27
no.1
/
pp.187-198
/
2020
With the development of technology and the creation of an entertainment environment for leisure, various marketing strategies are being used in the film industry. Among them, the use of the credit cookie of ending credits was very effective in producing the series. The ending credit is the time it takes to show the names of the people who made the movie, which is meaningless to the audience. There is a cost to produce a ending credit but It wasn't made because no revenue was generated. The credit cookie was inserted into this ending credit area, which brought new pleasure to the audience. Most of them were epilogue images showing the story behind the movie, NG images showing the NG situation during film production, and In videos mentioned in the movie but not shown in the movie itself. As various ideas about credit cookie were connected with marketing, a series movie and a spin-off foretelling the derivative works after the screening work were produced and have a new meaning. As a result, the time of ending credits, which had no commercial value, became the methodology of the most powerful promotional strategy. Looking at the difference between live-action film and animation in producing such credit cookie, unlike live-action films that edit the remaining parts after shooting, the NG video of the animation has a lot of time and money to produce. So, it hasn't try very well, and it seems to have been actively produced when moving from 2D animation to 3D animation. This is because 3D animation, which has already been modeled, can create new NG scenes by simply adding animating based on the layout of the created scene. Since it is possible to produce an episode movie at a low cost and time, and to use the scenes of the movie after the production, it will be necessary to strategically produce credit cookie for promotion in animation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.