• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.267-273
• /
• 2018

Hydrothermal liquefaction of Chlorella vulgaris feedstock containing 80% (w/w) water was conducted in a batch reactor as a function of temperature (300, 325 and $350^{\circ}C$) and reaction times (5, 10 and 30 min). The biocrude yield, elemental composition and higher heating value obtained for various reaction conditions helped to predict the optimum conditions for maximizing energy recovery. To optimize the recovery of inorganic nutrients, we further investigated the effect of reaction conditions on the ammonium ($NH_4{^+}$), phosphate ($PO_4{^{3-}}$), nitrate ($NO_3{^-}$) and nitrite ($NO_2{^-}$) concentrations in the aqueous phase. A maximum energy recovery of 78% was obtained at $350^{\circ}C$ and 5 min, with a high energy density of 34.3 MJ/kg and lower contents of oxygen. For the recovery of inorganic nutrients, shorter reaction times achieved higher phosphorus recovery, with maximum recovery being 53% at $350^{\circ}C$ and 5 min. Our results indicate that the reaction condition of $350^{\circ}C$ for 5 min was optimal for maximizing energy recovery with improved quality, at the same time achieving a high phosphorus recovery.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.812-824
• /
• 2022

This study proposes to develop a 3D printed re-entrant(RE) strip by shape memory thermoplastic polyurethane that can be deformed and recovered by thermal stimulation. The most suitable 3D printing infill density condition and temperature condition during shape recovery for mechanical behavior were confirmed. As the poisson's ratio indicated, the higher the recovery temperature, the closer the poisson's ratio to zero and the better the auxetic properties. After recovery testing for five minutes, it appeared that the shape recovery ratio was the highest at 70℃. The temperature range when the shape recovery ratio appeared to be more than 90% was a recovery temperature of more than 50℃ and 60℃ when deformed under a constant load of 100 gf and 300 gf, respectively. This indicated that further deformation occurred after maximum recovery when recovered at a temperature of 80℃, which is above the glass transition temperature range. As for REstrip by infill density, a shape recovery properties of 100% was superior than 50%. Additionally, as the re-entrant structure exhibited a shape recovery ratio of more than 90%, and exhibited auxetic properties. It was confirmed that the infill density condition of 100% and the temperature condition of 70℃ are suitable for REstrips for applying the actuator.

• 한국멀티미디어학회논문지
• /
• 제18권1호
• /
• pp.88-96
• /
• 2015

The recent increase in the production of 3D contents allowed viewers to experience various 3D contents. However, some of the viewers did not experience 3D depth well. Several researches were done in past to measure viewers' 3D depth perception, but these researches were done with certain limitations. In this paper, we measured viewers' 3D depth perception and recovery rate in relation with the changes in binocular disparities, saturation, and brightness values after subjects' watching 2D/3D contents. The results showed that when viewers watched the 3D content with positive binocular disparities for 42 minutes, viewers felt that the object seemed to have moved further forward than it was before; with 3D content with negative binocular disparities, viewers felt that the object seemed to be moved backwards. We found that the locational differences of the object in positive disparities were greater than those in the negative binocular disparities. The recovery rate was computed by comparing two measured values of before and after watching 3D contents for 30 minutes. On average, after 30-minute break, viewers showed roughly 50 % of recovery rate.

• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.379-391
• /
• 2004

This paper deals with the development of h-version adaptive mesh refinement and recovery strategy using variable-node elements and its application to various engineering field problems with 2D quadrilateral and 3D hexahedral models. The variable-node elements which have variable mid-side nodes on edges or faces are effectively used in overcoming some problems in connecting the different layer patterns of the transition zone between the refined and coarse mesh. A modified recovery technique of gradients adequate for variable-node elements and proper selection of error norms for each engineering field problems are proposed. In the region in which the error is greater than the permissible refinement error, the mesh is locally refined by subdivision. Reversely, in some parts of the domain having the error smaller than the permissible recovery error, the mesh is locally recovered (coarsened) by combination. Hierarchical structures (e.g. quadtrees and octrees) and element-based storage structures are composed to perform this adaptive process of refinement and recovery. Some numerical examples of a 3D heat conduction analysis of the concrete with hydration heat and a 2D flow analysis of vortex shedding show effectiveness and validity of the proposed scheme.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.507-516
• /
• 2014

We present a hybrid method for spectral reflectivity recovery, using 3D extrapolation as a supplemental method for 3D interpolation. The proposed 3D extrapolation is an extended version of 3D interpolation based on the barycentric algorithm. It is faster and more accurate than the conventional spectral-recovery techniques of principal-component analysis and nonnegative matrix transformation. Four different extrapolation techniques (based on nearest neighbors, circumcenters, in-centers, and centroids) are formulated and applied to recover spectral reflectivity. Under the standard conditions of a D65 illuminant and 1964 $10^{\circ}$ observer, all reflectivity data from 1269 Munsell color chips are successfully reconstructed. The superiority of the proposed method is demonstrated using statistical data to compare coefficients of correlation and determination. The proposed hybrid method can be applied for fast and accurate spectral reflectivity recovery in image processing.

• 한국의류산업학회지
• /
• 제9권4호
• /
• pp.445-449
• /
• 2007

The results of warmth retaining, heat transfer and compressive elastic recovery of the five kinds of bedspread fabrics, which were produced from packing weft of 2700 denier and 3600 denier batt yarn treated with raw material of Polyester $150^D$/48 DTY, are as follows: 1) 3600 denier packing weft showed lover count in compressive elastic recovery than 2700d packing weft, so it took longer time to recover. 2) When packing weft of the same count is used, a sample of packing weft with higher density showed lower recovery. 3) It took 2700d packing weft 30min to get approximately 98% recovery in temperature $30^{\circ}C$. But, 3600d packing weft stayed under 98% recovery in the same temperature. Considering only the result of compressive elastic recovery, we should use 2700d packing weft. 4) The higher the density of packing weft is, the higher warmth retaining becomes. Although sharp increase appeared until 5min, equilibrium was kept without any increase after that time. 5) When 2700d packing weft was used, the maximum warmth retaining was approximately 60% and 64% in the conditions of density 12(thread/in) and 22(thread/in) respectively.

• 반도체디스플레이기술학회지
• /
• 제12권2호
• /
• pp.27-32
• /
• 2013

Shape From Focus (SFF) is a passive optical technique to recover 3D structure of an object that utilizes focus information from 2D images of the object taken at different focus levels. Mostly, SFF methods use a single focus measure to compute image focus quality of each pixel in the image sequence. However, it is difficult to recover accurate 3D shape using a single focus measure, as different focus measures perform differently in diverse conditions. In this paper, a nonlinear Total Variation (TV) based approach is proposed for 3D shape recovery. To improve the result of surface reconstruction, several initial depth maps are obtained using different focus measures and the resultant 3D shape is obtained by diffusing them through TV. The proposed method is tested and evaluated by using image sequences of synthetic and real objects. The results and comparative analysis demonstrate the effectiveness of our method.

• 대한한의학회지
• /
• 제27권1호
• /
• pp.36-46
• /
• 2006

Objectives : Ginseng Research Group in Korea Food Research Institute developed Saeng Mac San (KFRI-2)and Je Ho Tang (KFRI-3) with their sensory factors more acceptable. And we examined their effects on the short-term recovery capacity for cycling exercise (EX) maintained to all-out. Methods : Seven healthy young subjects (aged $24.0{\pm}2.1yr$) were volunteered at this double blind test. Each of KFRI-2, 3, a commercial sport beverage and control (CON) was offered randomly on a series of EX protocol including 65% VO2max-90min EX (D-ride). 1h-recovery and 85% VO2max EX to all-out (P-ride) under the control of their heart rate (HR) and rating perception of exertion (RPE). Blood samples were collected before D-ride, 30, 60 and 90min in D-ride, 30 and 60min in the recovery period and each 10min in P-ride. Plasma analysis items were glucose, insulin, cortisol (CORT), testosterone (TEST), free fatty acid (FFA), $Na^+$, Cl-and $K^+$. The collected data (Means${\pm}$SE) were analysed by two-way ANOVA and statistically significant differences between treatments (p<0.05) by LSD.; the significant level in FFA, $Na^+$, Cl-and $Na^+$ was p<0.01 Results : At 30min during recovery. plasma glucose level in KFRI-3 was significantly higher than CON, and also insulin in KFRI-3 was than CON and KFRI-2. FFA in KFRI-3 was significantly lower than CON during recovery. $Na^+$ in KFRI-3 significantly higher than CON at 90min in D-ride, and also KFRI-2 was at 60min during recovery. However CORT, TEST, Cl-and $Na^+$ in treated beverages were not significant. KFRI-2, 3 elevated the time for P-ride more than CON did. Conclusions : KFRI-2, 3 elevated the time for P-ride about 12% more than CON did. It is based on rapid recovery of plasma glucose level and inhibition of lipolysis during recovery.

• 터널과지하공간
• /
• 제27권3호
• /
• pp.161-171
• /
• 2017

고품위 석회석에 대한 수요는 점차 증가하고 있는 반면, 국내 석회석 광산에서의 고품위 석회석 생산은 체계적인 개발 계획의 부재, 고품위 광체에 대한 선택적 채광 기술의 부족, 환경보호에 대한 사회적 인식 제고에 따른 고비용 갱내 채광으로의 전환, 채수율 제고를 위한 채광기술의 개발 노력 부족, 산업의 영세성 등과 같은 여러 문제들로 인하여 원활하게 진행되지 않고 있다. 본 연구에서는 3D 모델링 기법을 활용하여 대성MDI 동해 사업소 대평지구의 지질구조 및 광체, 갱도 및 채굴적을 포함하는 3D 모델을 구축하였으며, 이를 토대로 주방식 하이브리드 채광법을 시험 적용하여 확정매장량, 가채광량 및 채수율을 산정하고 이를 기존의 주방식 채광법에 의한 결과와 비교 분석하였다. Test-bed 구역에서 주방식하이브리드 채광법의 시험 적용 결과를 분석한 결과 채수율이 71.6%로, 약 26%p. 향상되는 결과를 얻었다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.281-285
• /
• 2001

This study was carried out to improve the performance of heat recovery device attached to exhaust gas flue connected to combustion chamber of greenhouse heating system. Three different units were prepared for the comparison of heat recovery performance; AB-type(control unit) is exactly the same with the typical one fabricated for previous study of analyzing heat recovery performance in greenhouse heating system, other two types(C-type and D-type) modified from the control unit are different in the aspects of airflow direction(U-turn airflow) and pipe arrangement. The results are summarized as follows; 1. In the case of Type-AB, when considering the initial cost and current electricity fee required for system operation, it is expected that one or two years at most would be enough to return the whole cost invested. 2. Type-C and Type-D, basically different with Type-AB in the aspect of airflow pattern, are not sensitive to the change of blower capacity with higher than $25\;m^{3}/min$. Therefore, heat recovery performance was not improved so significantly with the increment of blower capacity. This is assumed to be that air flow resistance in high air capacity reduces the heat exchange rate as well. Never the less, compared with control unit, resultant heat recovery rate in Type-C and Type-D were improved by about 5% and 13%, respectively. 3. Desirable blower capacity for these heat recovery units experimented are expected to be about $25\;m^{3}/min$, and at the proper blower capacity, U-turn airflow units showed better heat recovery performance than control unit. But, without regard to the type of heat recovery unit, it is recommended that comprehensive consideration of system's physical factors such as pipe arrangement density, unit pipe length and pipe thickness, etc., are required for the optimization of heat recovery system in the aspects of not only energy conservation but economic system design.